summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-03-13ARM: dts: stm32: Add timer support for STM32F7Patrice Chotard
Add missing timer node to enable timer5 for STM32F7 SoCs family Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13rk3288: vyasa: Add eMMC boot supportJagan Teki
RK3288 Vyasa has eMMC boot support, with JP4 open. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add usb otg for rk3288-vyasaJagan Teki
Add usb otg support for rk3288-vyasa, board support usb1 otg power through otg_vbus_drv and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add usb host for rk3288-vyasaJagan Teki
Add usb host support for rk3288-vyasa, board support hub power through phy_pwr_en and usb2 host power through usb2_pwr_en and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add gmac support for rk3288-vyasa boardJagan Teki
Sync gmac dts node from Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Add regulators for rk3288-vyasaJagan Teki
Add supporting regulators for rk3288-vyasa board, dc12_vbat is parent regulatorand followed regulators as are child regulators. regulator naming conversion followed as per schematic for better readability and easy for identification. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: rk3288-vyasa: Use vmmc-supply from PMICJagan Teki
rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd, so use the same by renaming vcc33_sd to vcc_sd(as per schematic) and drop explicit regulator definition from root. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: rk3288-vyasa: Remove vdd_log from rk808, DCDC_REG1Jagan Teki
vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so remove the same and update the regulator-name as 'vdd_arm' to sync with existing rk3288 board dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-13ARM: dts: rockchip: Sync rk3288-vyasa dts from LinuxJagan Teki
Sync rk3288-vyasa board dts from Linux for proper updates and maintenance - rk3288-vyasa.dts: Similar to Linux dts - rk3288-vyasa-u-boot.dtsi: u-boot dts changes Also updated MAINTAINERS for these dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-11ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsiJagan Teki
This patch fixes the wrongly included dtsi file which was breaking mainline support for Engicam i.CoreM6 DualLite/Solo RQS. Linux commit details for the same change as "ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS" (sha1: c0c6bb2322964bd264b4ddedaa5776f40c709f0c) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-11ARM: dts: imx6qdl-icore-rqs: Sync usdhc4 node from LinuxJagan Teki
usdhc4 node need to update pinctrl, bus-width and non-removable properties, sync the same from Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-05Merge git://git.denx.de/u-boot-shTom Rini
2018-03-05ARM: DTS: Re-sync logicpd-som-lv with Linux 4.16-rc3Adam Ford
This should clean up a warning about a missing phy-cells Signed-off-by: Adam Ford <aford173@gmail.com>
2018-03-05ARM: dts: rmobile: Add PHY reset GPIOMarek Vasut
This patch got dropped during the update of DTs to 4.14, re-add it back. This adds reset GPIOs to the ethernet PHYs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: dts: rmobile: Make PFC and RST available early on Gen2 onlyMarek Vasut
These do not need to be available early on Gen3 , so move them to the respective DT files. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: rmobile: Add R8A77965 Salvator-XS board supportMarek Vasut
Add R8A77965 M3N Salvator-XS development kit support. This kit is similar to the other Salvator-X(S) ones, except is has M3N SoC on it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: dts: rmobile: Add SDHI nodes to R8A77965 M3N DTMarek Vasut
Add SDHI nodes to r8a77965.dtsi to get eMMC and SD slots operational. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: dts: rmobile: Add xHCI node to R8A77965 M3N DTMarek Vasut
Add xHCI node to r8a77965.dtsi to get xHCI USB operational. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: dts: rmobile: Add EHCI nodes to R8A77965 M3N DTMarek Vasut
Add generic EHCI nodes to r8a77965.dtsi to get EHCI USB operational. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: dts: rmobile: Add RAVB node to R8A77965 M3N DTMarek Vasut
Add RAVB node to r8a77965.dtsi to get ethernet operational. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-05ARM: dts: rmobile: Import R8A77965 M3N DT files from LinuxMarek Vasut
Import the R8A77965 M3N DT from Linux 4.16-rc1 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-03-01Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-02-26ARM: dts: rmobile: Import proper DTS for H2 StoutMarek Vasut
Replace the placeholder DTS for R8A7790 H2 Stout with a proper DTS from Linux next . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-26ARM: socfpga: Add new CycloneV SoC Devboards DBM-SoC1 boardMarek Vasut
Add support for a new boards from devboards.de , the DBM-SoC1 . This board has one ethernet port, one USB OTG port and USB UART. Signed-off-by: Marek Vasut <marex@denx.de>
2018-02-25Merge git://git.denx.de/u-boot-imxTom Rini
2018-02-24ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPLJagan Teki
usdhc4 has eMMC on icore-rqs boards, SPL is not detecting it becuase of u-boot,dm-spl flag so add it to make eMMC working. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-02-22imx6ul: engicam: Drop isiot-mmc defconfigJagan Teki
Engicam Is.IoT has eMMC and NAND cpu modules where MMC is common for both, so remove explicit mmc defconfig. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-02-19dts: am57xx-idk: disable HS200 supportJean-Jacques Hiblot
HS200 cannot be supported on mmc2, because the IO lines of mmc2 are connected to 3.3v. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19dts: am57xx-beagle-x15: disable UHS and HS200 supportJean-Jacques Hiblot
The UHS modes are not supported in beagle-x15 because it's not possible to switch the IO lines supply voltage to 1.8v. Also HS200 cannot be supported on mmc2, because the IO lines of mmc2 are connected to 3.3v. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodesJean-Jacques Hiblot
On DRA7 family SoCs, MMC1 controller supports SDR104, SDR50, DDR50, SDR25 and SDR12 UHS modes. MMC2 controller supports HS200 and DDR modes. MMC3 controller supports SDR12, SDR25 and SDR50 modes. MMC4 controller supports SDR12 and SDR25 modes. Add these supported modes in device-tree file. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-19ARM: dts: DRA7: use new dra7-specific compatible stringKishon Vijay Abraham I
Use the new compatible string "ti,dra7-hsmmc" that was specifically added for dra7 and dra72. This is required since for dra7 and dra72 processors iodelay values has to be set unlike other processors. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-17ARM: dts: rmobile: Enable I2C6 on PorterMarek Vasut
Enable I2C6 bus on Porter to access the PMIC , ie. to reset the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-17ARM: dts: rmobile: Move the u-boot,dm-pre-reloc into u-boot DTS on porterMarek Vasut
Fix ommission where the u-boot,dm-pre-reloc DT bit was pulled into the common DT, not the U-Boot specific DT part. Move it to U-Boot DT part. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-16Merge git://git.denx.de/u-boot-shTom Rini
2018-02-16ARM: dts: rmobile: Make PFC and RST available before relocMarek Vasut
Those two nodes are needed to configure pinmux before relocation and to configure clock before relocation, since CPG/MSSR needs access to RST node. This is not noticable on Gen3, but on Gen2 this causes problems in SPL if they are not available early. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-16ARM: dts: rmobile: Make scif0 available before reloc on PorterMarek Vasut
Make the SCIF available before relocation and in SPL on R8A7791 Porter. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-02-15arm: socfpga: fix qspi flash compatible (add "spi-flash")Simon Goldschmidt
This patch adds "spi-flash" to the compatible list of the qspi flash chip for all socfpga boards. This is required to make qspi work on these boards on top of the recent fixes. Without the "spi-flash" compatible string for the flash chip, the speed cannot be read and a speed of 0Hz is used (which results in a divide-by-zero on these boards). Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
2018-02-07ARM: dts: keystone-k2g-ice: Add support for QSPIVignesh R
K2G ICE has a s25fl256s1 QSPI NOR flash connected to QSPI at CS0. Add DT entries for the same. Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-02-04arm: dts: imx6ull: move input include to base device treeStefan Agner
The input keycode KEY_POWER is used in the imx6ull.dtsi file, hence include the input header where used. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-04ARM: dts: add pinmux and tuning settings for HS200/SDR104Peng Fan
The pinmux and tuning settings are from https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ arm/boot/dts/imx7s.dtsi?h=imx_4.9.11_1.0.0_ga https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ arm/boot/dts/imx7d-sdb.dts?h=imx_4.9.11_1.0.0_ga To support HS200 and SDR104, we need change pinmux settings dynamically. And configure tuning step and start tuning tap, otherwise you may see tuning failure. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2018-02-04imx: imx8mq: add dtsi filePeng Fan
Add dtsi file for i.MX8MQ. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2018-02-04board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kitJagan Teki
i.CoreM6 1.5 is an another i.CoreM6 QDL cpu modules which can be connected to EDIMM starter kit design with eMMC and MIPI-CSI interfaces suitable for Android and video capture application. notable features: CPU NXP i.MX6 S/DL/D/Q, Up to 4 x Cortex-A9@800MHz Memory Up to 2 GB DDR3-1066 Video Interfaces Up to 1 Parallel Up to 2 LVDS HDMI 1.4 port 8 bit CSI INPUT MIPI-CSI INPUT 1 x 10/100 Ethernet interface, 2 x USB, 1 x PCIe, 1 x I2S etc This patch adds support for Quad/Dual and DualLite/Solo SOM's on MIPI starter kit with boot from SD and eMMC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-01-31Merge tag 'xilinx-for-v2018.03' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.03 - Several Kconfig fixes (also moving configs to defconfigs) - Some DTS updates - ZynqMP psu rework based on Zynq concept - Add low level initialization for zc770 and zcu102 - Add support for Zynq zc770 x16 nand configuration - Add mini nand/emmc ZynqMP targets - Some arasan nand changes
2018-01-30arm: zynq: Remove ethernet alias for topic-miamiMichal Simek
Ethernet is not enabled that's why this alias should be completely unused. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Mark cc108 uart to be initialized before relocationMichal Simek
The same change is done for others zynq boards to get uart as early as possible. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30xilinx: zynqmp: Add new target with only emmc enabledSiva Durga Prasad Paladugu
This patch adds new target which is called as mini configuration with only emmc functionality and other required basic features enabled. This will be used to run in system with small footprint and needs emmc support. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30xilinx: zynqmp: Add new target with only nand enabledSiva Durga Prasad Paladugu
This patch adds new target which is called as mini configuration with only nand functionality and other required basic features enabled. This will be used to run in system with small footprint and needs nand support. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Fix pmu register description coding styleMichal Simek
Drop the space before/after '<' and '>'; and separate the entries to be a bit more readable. Reported-by: Julia Cartwright <julia@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm: zynq: Add support for zc770-xm011-x16 configurationMichal Simek
zc770-xm011 is x8 width configuration. This FMC card has also x16 variant which requires different ps7_init configuration. This patch adds it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-28Merge git://git.denx.de/u-boot-rockchipTom Rini
generated by cgit (git 2.34.1) at 2024-12-29 04:21:41 +0000