summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-12-06rockchip: rk3399: Add Ficus EE board supportManivannan Sadhasivam
Add board support for Ficus EE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * Gigabit Ethernet * USB 2.0 * MMC Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> [Reworked based on common Rock960 family support] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add Rock960 CE board supportManivannan Sadhasivam
Add board support for Rock960 CE board from Vamrs. This board utilizes common Rock960 family support. Following peripherals are tested and known to work: * USB 2.0 * MMC This commit also adds DDR configuration for LPDDR3-2GiB-1600MHz which is being used on the board. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-06rockchip: rk3399: Add common Rock960 family from VamrsManivannan Sadhasivam
Rock960 is a family of boards based on Rockchip RK3399 SoC from Vamrs. It consists of Rock960 (Consumer Edition) and Ficus (Enterprise Edition) 96Boards. Below are some of the key differences between both Rock960 and Ficus boards: 1. Different host enable GPIO for USB 2. Different power and reset GPIO for PCI-E 3. No Ethernet port on Rock960 The common board support will be utilized by both boards. The device tree has been organized in such a way that only the properties which differ between both boards are placed in the board specific dts and the reset of the nodes are placed in common dtsi file. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [Added instructions for SD card boot] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2018-12-06arm: dts: rockchip: add some common pin-settings to rk3399Randy Li
Those pins would be used by many boards. Commit grabbed from Linux: commit b41023282d07b61a53e2c9b9508912b1e7ce7b4f Author: Randy Li <ayaka@soulik.info> Date: Thu Jun 21 21:32:10 2018 +0800 arm64: dts: rockchip: add some common pin-settings to rk3399 Those pins would be used by many boards. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-04ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6Marek Vasut
Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6Marek Vasut
Synchronize DTs with mainline Linux 4.19.6 , commit 96db90800c06d3fe3fa08eb6222fe201286bb778 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract i2c6 on M2W PorterMarek Vasut
The i2c6 node is missing in mainline Linux thus far, pull it into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SCIF2 node on E3 EbisuMarek Vasut
The SCIF2 node is not in Linux 4.17 DTs on E3, pull it into U-Boot specific DT extras until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI nodes on E3 EbisuMarek Vasut
The SDHI nodes are not in Linux 4.17 DTs in E3, pull them into U-Boot specific DT extras until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI extras on H3, M3W, M3N Salvator-XMarek Vasut
The SDHI nodes are missing features supported in upstream U-Boot, like mode support properties. Pull the extras into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCBMarek Vasut
The SDHI nodes are missing features supported in upstream U-Boot, like mode support properties. Pull the extras into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCBMarek Vasut
The CPLD node is missing in Linux 4.17 DTs on H3/M3W ULCB, pull the node into U-Boot specific DT until it hits mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract AVB node extras on V3M EagleMarek Vasut
The AVB node is not complete in Linux 4.17 DTs on V3M Eagle, pull the AVB node extras into U-Boot specific DT until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract SDHI nodes on M3NMarek Vasut
The SDHI nodes are not in Linux 4.17 DTs in M3N, pull them into U-Boot specific DT extras until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract USB nodes on M3NMarek Vasut
The USB nodes are not in Linux 4.17 DTs in M3N, pull them into U-Boot specific DT extras until they hit mainline Linux, to make syncing of DTs easier. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Extract RPC node to u-boot specific DTMarek Vasut
The RPC DT bindings are still work in progress. Extract the RPC DT node from the DT to allow easier update and so it can be replaced once the DT bindings are stable. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-04ARM: dts: rmobile: Add soc label to Gen3Marek Vasut
Add label to the /soc node, so it can be referenced from the U-Boot DTs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- V2: Rebase on u-boot/master
2018-12-03Merge tag 'xilinx-for-v2019.01' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2019.01 microblaze: - Use default functions for memory decoding - Showing model from DT zynq: - Fix spi flash DTs - Fix zynq_help_text with CONFIG_SYS_LONGHELP - Tune cse/mini configurations - Enabling cse/mini testing with current targets zynqmp: - Enable gzip SPL support - Fix chip detection logic - Tune mini configurations - DT fixes(spi-flash, models, clocks, etc) - Add support for OF_SEPARATE configurations - Enabling mini testing with current targets - Add mini mtest configuration - Some minor config setting nand: - arasan: Add subpage configuration net: - gem: Add 64bit DMA support
2018-12-03Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- MMC fixes for R-Car Gen3
2018-12-03arm: baltos: move the board to CONFIG_BLKYegor Yefremov
Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-03ARM: meson: Add regmap support for clock driverLoic Devulder
This patch modifies the meson clock driver to use syscon/regmap like the Linux kernel does, as it is needed if we want to share the same DTS files. DTS files are synchronized from Linux 4.19. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-12-03ARM: dts: rmobile: Enable HS400 on Salvator-X, ULCB, EbisuMarek Vasut
Enable the HS400 support in DT on H3, M3W, M3N Salvator-X(S) and ULCB boards as well as E3 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable SDR modes on E3 EbisuMarek Vasut
Add regulators and pinmuxes for SDHI0 and SDHI1 SD and microSD slots on E3 Ebisu and mark them as capable of up to SDR104 mode of operation. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCBMarek Vasut
Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes in place, it is now possible to use SDR104. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-03ARM: dts: rmobile: Add eMMC DS pinmuxMarek Vasut
Add pinmux entry for the eMMC DS line, as it is connected on these boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-12-01Merge tag 'for-master-20181130' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements: - RK3188 USB-UART functionality - errors triggering a hard-stop in SPL on the RK3399 are reported - Rockchip RV1108 (SoC) support - MicroCrystal RV3029 (RTC) DM driver Fixes: - RK3188 early UART setup - limit SD-card frequency to 40MHz on the RK3399-Q7 - MIPI fixes - RK3399 CPUB clock initialisation
2018-11-30ARM: dts: rockchip: Add rv1108 USB OTG pinctrlOtavio Salvador
This adds the definitions need to use the USB OTG in rv1108 board. This has been tested using USB Mass Storage to export and program a eMMC device. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30ARM: dts: rockchip: Add rv1108 eMMC pinctrlOtavio Salvador
This adds the pinctrl handles to enable the use of eMMC on custom boards (as minievk) and makes it easier for later addition. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30rockchip: rk3399-puma: reduce sd card max-frequency to 40MHzPhilipp Tomsich
Some SanDisk Ultra cards trigger intermittent errors on detection resulting in an -EOPNOTSUPP, when running at 50MHz. Waveform analysis suggest that the level shifters that are used on the RK3399-Q7 module (for voltage translation between the on-module voltages and the 3.3V required on the card-edge) don't handle clock rates at or above 48MHz properly. This change reduces the maximum frequency on the external SD-interface to 40MHz (for a safety margin of 20%). Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
2018-11-30Merge git://git.denx.de/u-boot-marvellTom Rini
- Some Kirkwood boards converted to DM_SPI by Chris - New Armada-385 SoC revision printed by Chris - Ethernet enable on mcbin by Baruch - Support 2 DRAM banks on Armada-8k boards by Baruch
2018-11-30arm: mvebu: mcbin: dts: enable 1G network interfaceBaruch Siach
Describe the 1Gb network interface with on-board 88E1512 PHY. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-30arm64: zynqmp: Add mini mtest configurationMichal Simek
This configuration is useful when you want to run small u-boot and perform DDR memory test to make sure that DDR is properly configured. It is use for board bringup because alternative u-boot memory tests is quite good. Configuration is running out of OCM. As is done for others mini configurations 0x80 bytes for variables is enough and only default variables are stored there. Alternative memtest is enabled and also 2GB of DDR via DTS files. Configuration is enabling ZYNQMP_PSU_INIT_ENABLED and include psu_init() from zcu102 for testing purpose. In case of size issue this can be moved to SPL configuration as is done for mini_qspi configuration but it is not a problem now. Log: U-Boot 2018.11-00268-gbd58b8ba8915 (Nov 29 2018 - 15:33:35 +0100) Model: ZynqMP MINI Board: Xilinx ZynqMP DRAM: WARNING: Initializing TCM overwrites TCM content 2 GiB EL Level: EL3 In: dcc Out: dcc Err: dcc ZynqMP> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-11-29Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogicTom Rini
Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support
2018-11-29arm: socfpga: make socfpga_socrates_defconfig boot from QSPISimon Goldschmidt
This fixes the board's dts to supply SPL with QSPI info. The EBV Socrates board has DIP switches to boot from SD card or QSPI, so let's fix its defconfig to work for both cases. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-11-29dts: arm: socfpga: merge gen5 devicetrees from linuxSimon Goldschmidt
Add -u-boot.dtsi files to keep the current U-Boot behaviour: - add u-boot,dm-pre-reloc where required - disable watchdog - set uart clock frequency - add gpio bank-name properties where appropriate: - make qspi work (add alias for spi0, fix compatible for flash) - enable usb (status okay, add alias for udc0) Adapt board dts files that are not in Linux to keep their old behaviour. Change licenses to SPDX. (Patman warnings/errors are in 1:1 copied files from Linux) Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-11-29spi: cadence_qspi: use "cdns,qspi-nor" as compatibleSimon Goldschmidt
Linux uses "cdns,qspi-nor" as compatible string for the cadence qspi driver, so change driver, docs and all device trees. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-11-29arm64: zynqmp: Setup clock-output-names for si570 chipsMichal Simek
If there are more instances of si570 clock-output-names property should be used for differentiation of clock output. The patch is adding this optional properties for all zynqmp boards with si570 chip. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29arm64: zynqmp: Disable ltc2952 poweroff chipMichal Simek
This chip is on the board but handling should be done via firmware not via Linux driver. Changing status property to keep it in the tree to describe it instead of removing this node completely. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29arm64: zynqmp: Fix sdhci clock in emmc0 mini configurationMichal Simek
Add missing clocks property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29arm64: zynqmp: Wire spi-flash compatible string with flashesMichal Simek
Enable reading tx and rx buswidth from DT via spi-uclass. To get these from uclass spi-flash compatible string has to be added to flash node. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-29arm64: zynqmp: Define and enable qspi node for DC4 boardSiva Durga Prasad Paladugu
DC4 board has qspi on it hence define and enable qspi node for it. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-28arm: dts: MediaTek: add device tree for MT7623Ryder Lee
This adds device tree for MT7623 development board - Bananapi R2 Detailed hardware information for BPI-R2 which could be found on http://wiki.banana-pi.org/Banana_Pi_BPI-R2. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28arm: dts: MediaTek: add device tree for MT7629Ryder Lee
This patch adds MT7629 device tree and the includes it needs. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-26ARM: dts: am335x-chiliboard: add /chosen/stdout-pathMarcin Niestroj
Add that node path in u-boot overlay dtsi file for now to keep am335x-chiliboard.dts in sync with Linux. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS filesMarcin Niestroj
Import chiliSOM and chiliboard dts files from Linux v4.19. They will be used after transition to driver model and device-tree based boot. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1Neil Armstrong
Synchronize the Amlogic AXG Device Tree files and bindings include from the recent Linux 4.20-rc1, because it includes patches fixing support for U-boot. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-11-26arm64: zynqmp: Reflect emmc controller ID in model in DTMichal Simek
Make sense to add controller ID to model name to have it visible through the logs to know which controller is used by which configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-26arm: zynq: cse_qspi: Fix overwriting spi-rx-bus-width propertySiva Durga Prasad Paladugu
spi-rx-bus-width property is part of flash, so it should be moved to flash node from qspi node. This patch fixes the incorrect read of spi-rx-bus-width property by moving it to flash node. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-20ARM: mvebu: dts: add Clearfog GT-8KRabeeh Khoury
The SolidRun Clearfog GT-8K is based on Armada 8040. https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k The config file is identical to the Macchiatobin one (mvebu_mcbin-88f8040_defconfig) with only the default device-tree changed. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2025-01-29 02:49:01 +0000