summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-10-08pico-imx7d: Remove dead code for dm_videoJoris Offouga
Since convert dm_video, unused code introduced, so remove this Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08imx: Add i.MX8MM EVK board support.Peng Fan
Add board and SoC dts Add ddr training code support SD/MMC/GPIO/PINCTRL/UART Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: add i.MX8MM pin funcPeng Fan
Import i.MX8MM pin func from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: import i.MX8MM dtsiPeng Fan
Import i.MX8MM dtsi from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add the i.MX8M reset controller nodePatrick Wildt
This patch adds the reset controller node to the i.MX8MQ SoC device tree. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08imx: add support for i.MX8MQ power domain controllerPatrick Wildt
Add support for the power domain controller that's used on the i.MX8MQ. This will be needed to be able to power on the PCIe controller. Bindings taken from Linux, driver implementation taken from the i.MX8 power domain controller and adjusted for the i.MX8M SoC. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08ARM: dts: pcl063: add usdhc reset pin of eMMCParthiban Nallathambi
pcl063 phycore SoM with eMMC also got usdhc reset pin, add reset pin to pinmux. Signed-off-by: Parthiban Nallathambi <pn@denx.de>
2019-10-08imx: wandboard: convert FEC support to DM_ETHAnatolij Gustschin
Remove CONFIG_DM_ETH conversion warning to avoid board removal. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi fileLukasz Majewski
After this change it is possible to use imx28-<board>-u-boot.dtsi with the imx28-u-boot.dtsi explicitly included without breaking setup from imx28-<board>.dts file. The problem is that the imx28.dtsi included in a wrong place overrides the changes made in imx28-<board>.dts. As a result some devices are "disabled" in the final DTB. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)Lukasz Majewski
This commit enables support for CONFIG_WDT in the U-Boot proper. Moreover, the SYSRESET_WATCHDOG driver is used to support 'reset' command. As SPL is not yet ready for DM conversion, the CONFIG_HW_WATCHDOG is enabled for it. This allows the legacy SPL code to work properly. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08pico-imx6: Add initial supportFabio Estevam
Add the initial support for the pico-imx6 variants. DDR initialization is based on the TechNexion's U-Boot code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08configs: pico-imx7d: Convert to DM_VIDEOJoris Offouga
This commit convert all pico-imx7d to DM_VIDEO Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08ARM: dts: pico-imx7d: sync device tree with v5.3-rc6Joris Offouga
Synchronize device tree with v5.3-rc6 label Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts changeJoris Offouga
This commit introduce u-boot.dtsi Signed-off-by: Joris Offouga <offougajoris@gmail.com> Suggested-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsiPeng Fan
The changes were added by following patch: commit <9002e735e717> ("imx: mx6sabresd: fix boot hang with video") commit <f45ec8fcfb86> ("imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes") Let's move the U-Boot specific change to imx6qdl-u-boot.dtsi Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08nitrogen6x: migrate to using device treeTroy Kisky
Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio commandPeng Fan
The gpio command currently uses equal bank names "GPIO0_" for all existing gpio banks, i. e.: U-Boot# gpio status -a Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: mx6ul_14x14_evk: convert to DM_VIDEOPeng Fan
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: add i.MX6ULZ boardPeng Fan
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: import dts for i.MX6ULZPeng Fan
Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: sync dts for i.MX6ULLPeng Fan
Sync kernel dts for i.MX6ULL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: sync dts for i.MX6ULPeng Fan
Sync kernel dts for i.MX6UL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-30ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulatorMarek Vasut
This patch restores commit c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator"), which was accidentally dropped during DT resync in commit 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0"). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Fixes: 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-19rockchip: rk3288-tinker: Attach missing peripherals at SPLMichael Trimarchi
Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use and mark them as dm,spl so-that it would initialize at SPL. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-13ARM: dts: dra74x: Fix iodelay configuration for mmc3Faiz Abbas
According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values are configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13arm: am437x: cm-t43: Add device tree, enable OF_CONTROLSuniel Mahesh
Add device tree from Linux for driver model conversion and enable OF_CONTROL. This will remove the following compile warning: ================================================== Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument =================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-12arm: dts: ls1028a-qds: define the MDIO MUXAlex Marginean
Add the device-tree structure describing the MUX in board dts. QDS board has an on-board RGMII PHY and 4 slots for extension cards. All these can be accessed over MDIO through a MDIO MUX controlled over I2C. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for ls1028ardbYinbo Zhu
Add emmc hs200 support for ls1028ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for lx2160ardbYinbo Zhu
Add emmc hs200 support for lx2160ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for ls1012ardbYinbo Zhu
Add emmc hs200 support for ls1012ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-11rockchip: rk3399: dts: add boot order for rockpro64Kever Yang
The rk3399 rockpro64 board can boot from emmc and sdcard. TODO: add spiflash as boot device. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-08Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Bug fixes to mmc_spi Add Aspeed SD driver Fix dw_mmc timeout calculation Fix timeout values passed to mmc_wait_dat0 sdhci dt caps/mask update [trini: Fix evb-ast2500_defconfig CONFIG_MMC line] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-05ARM: dts: ast2500: Add SDHCI nodesEddie James
Add nodes for the Aspeed SD controllers with their necessary properties. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-04arm: dts: Set custom names for cp110 master/slave MDIO busesAlex Marginean
Implicitly Marvell MDIO driver uses DT node names for devices, but in this case that is not unique. Set MDIO device names for master/slave to cpm/cps. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-01Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- r8a66597 usb changes
2019-08-27stm32mp1: Add remoteproc support for m4 coprocessorPatrick Delaunay
Alignment with kernel patch proposal for binding: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c https://lkml.org/lkml/2019/5/14/159 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: Update the way vdd-supply is retrieved from DTPatrick Delaunay
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply and is a subnode of pwr-regulators. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: support of error led on ed1/ev1 boardPatrick Delaunay
Create a function led_error_blink and add node in device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 bootPatrick Delaunay
As for Audio codec IC, HDMI IC is not "IO safe". HDMI regulators (v3v3 and v1v2) must be enabled to allow I2C1 bus usage. HDMI IC must be under reset during power up and keep HDMI and AUDIO devices in reset while they are not used in U-Boot to keep them in low power mode (each device can be kept in reset independently keeping their power supplies ON until kernel). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINKPatrick Delaunay
Avoid U-Boot auto-boot interruption for line break detection on console when the RX line connected to STLINK is floating (-IO error in getc cause by framing error and testc return 1) Same workaround is applied on all the STMicroelectonics board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: add key support on DK1/DK2Patrick Delaunay
Allow to use PA13 and PA14 to force fastboot mode or STM32CubeProgrammer mode. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC filePatrick Delaunay
The pre-relocation probe is needed to reserve video frame buffer in video_reserve() for all the board; LDTC must be tagged prereloc in SOC U-Boot dtsi file. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: Add PSCI node access before relocationPatrick Delaunay
Add node in DT and avoid error to search UCLASS_SYSRESET in board_f.c::print_resetinfo() and lost 1.6s in U-Boot for the trusted boot chain. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: Add iwdg2 support for SPLPatrick Delaunay
This patch adds independent watchdog support for stm32mp157c in SPL. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: DDR config v1.45Patrick Delaunay
Update DDR configuration with the latest update: - Change DQSGE to 1 for DDR3, to cure missing DQS preamble. Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: sync device tree with v5.3-rc2Patrick Delaunay
Synchronize device tree with v5.3-rc2 label and update the associated u-boot dtsi. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stih410-b2260: Sync DT with kernel v5.2Patrice Chotard
Synchronize U-boot DT with kernel v5.2 for stih410-b2260. Update stih410-b2260-u-boot.dtsi accordingly. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2025-01-02 16:04:59 +0000