summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1Patrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32h743i-evalPatrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7Patrice Chotard
As U-boot stm32f clock driver doesn't support new bindings for auxiliary clocks (clocks = <&rcc 1 ....>), restore old bindings for usart1 to get console output. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7Patrice Chotard
Synchronize stm32h7 device tree with kernel v4.20. U-boot DT files and pinctrl bindings are updated, useless nodes are removed and gpio compatible added. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. As sdmmc is not yet supported on kernel side, sdmmc nodes are located in eval-u-boot and disco-u-boot DT files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. All pinctrl bindings are updated. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7Patrice Chotard
In order to prepare and ease future DT synchronization with kernel DT, migrate all U-boot specific nodes/properties/addons to U-boot DT files. Migrate also DT nodes which are not yet available on kernel DT side as ethernet, ltdc and qspi nodes. Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4Patrice Chotard
Synchronize stm32f7 device tree with kernel v4.20. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM:dts: stm32: sort nodes by alphabetical order in f4 u-boot filesPatrice Chotard
Sort nodes alphabetically to be coherent with all others STM32 DT files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1Neil Armstrong
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-22dt: bcm6858: add led controllerPhilippe Reynes
Add the led controller in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm963158: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm963158. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm63158: add nand controllerPhilippe Reynes
Add the nand controller in the bcm63158 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm968580xref: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm6858: add nand controllerPhilippe Reynes
Add the nand controller in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmelTom Rini
Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Various fastboot, dwc2/stm32 updates
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Various stratix10, gen5 updates
2019-04-21stm32mp1: add stusb1600 support for DK1 and DK2 boardPatrick Delaunay
The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21stm32mp1: migrate USBOTG device to driver modelPatrick Delaunay
Use the DWC2 device driver with DM_USB_GADGET support and cleanup the USB support in STM32MP1 board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21phy: usbphyc: Binding update of vdda supplyPatrick Delaunay
Move supply vdda1v1 and vdda1v8 in usbphyc node and no more in port Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-18arm: dts: h6: Add Beelink GS1 initial supportClément Péron
Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - 16GB eMMC - AXP805 PMIC - 1Gbps GMAC via RTL8211E - USB 2.0 and 3.0 Host - HDMI port - S/PDIF port - 5V/2A DC power supply - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS) Linux commit details about the sun50i-h6-beelink-gs1.dts sync: "arm64: dts: allwinner: h6: Introduce Beelink GS1 board" (sha1: 089bee8dd119ba084dee6b17a2e1a53df4f30193) Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-18ARM: dts: at91-sama5d2-icp: Add MACB nodeRazvan Stefanescu
MACB has a fixed link connection to KSZ8563 switch port. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
2019-04-18board: atmel: add SAMA5D2 ICP boardEugen Hristev
The SAMA5D2 ICP Board features the SAMA5D27 SoC, together with QSPI Flash, Wilc3000 wireless device and EtherCat support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-17arm: dts: Stratix10: Add QSPI nodeLey Foon Tan
Merge qspi dts node from Linux. Commit 0cb140d07fc75fb (arm64: dts: stratix10: Add QSPI support for Stratix10) Add -u-boot.dtsi files for non Linux dts properties and update properties for Uboot. - add u-boot,dm-pre-reloc - add alias for spi0 - change compatible for flash - support quad read and quad write - change maximum frequency to 100MHz Tested on Stratix 10 SoC devkit. SOCFPGA_STRATIX10 # sf probe 0:0 SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17arm: dts: Stratix10: Modify stratix10 socdk memory nodeLey Foon Tan
The stratix10 socdk ships with 4GB of memory. Modify the device tree to represent this. Note that to access 4GB of memory in Stratix 10, due to the IO space from 2GB to 4GB, we use the fact that the DDR controller ignores upper address bits outside of the configured DRAM's size. This means that , the 4GB DRAM is mapped to memory every 4GB. For an 8GB memory, you can either live with the 2GB IO space, and loose access to that memory from the processor, or use the same trick: Loose 2GB of memory: memory { device_type = "memory"; /* 8GB */ /* first 2GB */ reg = <0 0x00000000 0 0x80000000>, /* last 4GB */ <1 0x00000000 1 0x00000000>; u-boot,dm-pre-reloc; }; or to map it all: memory { device_type = "memory"; /* 8GB */ /* first 2GB */ reg = <0 0x00000000 0 0x80000000>, /* next 6GB */ <2 0x80000000 1 0x80000000>; u-boot,dm-pre-reloc; }; Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17arm: socfpga: move gen5 SDR driver to DMSimon Goldschmidt
To clean up reset handling for socfpga gen5, port the DDR driver to DM using UCLASS_RAM and implement proper reset handling. This gets us rid of one ad-hoc call to socfpga_per_reset(). The gen5 driver is implemented in 2 distinct files. One of it (containing the calibration training) is not touched much and is kept at using hard coded addresses since the code grows even more otherwise. SPL is changed from calling hard into the DDR driver code to just probing UCLASS_RESET and UCLASS_RAM. It is happy after finding a RAM driver after that. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17arm: socfpga: gen5: add reset & sdr node to SPL devicetreesSimon Goldschmidt
The SPL for socfpga gen5 currently takes all peripherals out of reset unconditionally. To implement proper reset handling for peripherals, the reset node has to be provided with the SPL dts. In preparation to move the DDR driver to DM, the sdr node is required in SPL, too. This patch adds "u-boot,dm-pre-reloc" to U-Boot specific dtsi addon files so that the reset manager and SDR driver correctly probe in SPL. It centralizes these settings into a common file since in contrast to boot-type specific nodes, "soc", "rst" and "sdr" are always needed. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17arm: socfpga: gen5: sync devicetrees to LinuxSimon Goldschmidt
This is again a sync to linux-next + pending patches in Dinh's tree at commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset properties")' It adds missing peripheral reset properties to socfpga.dtsi and removes U-Boot specific leftovers from socfpga_cyclone5_socrates.dts. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17arm: am57xx: cl-som-am57x: remove board supportUri Mashiach
U-Boot support for the CL-SOM-AM57x module is no longer required. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphierTom Rini
UniPhier SoC updates for v2019.07 - Sync DT with Linux 5.1-rc4 - Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
2019-04-17ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCIJagan Teki
Enable ahci node for BPI-M2-Berry, this would require since we have DM_SCSI enabled on the respective SoC. Unable to sync the same node from Linux, since the similar change is still in Linux ML. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: a20-wits-pro-a20-dkt: Enable AHCIJagan Teki
Enable ahci node for a20-wits-pro-a20-dkt, this would require since we have DM_SCSI enabled on the respective SoC. Right now, ahci enabled in -u-boot.dtsi and will remove once same supported by Linux. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: a20-m5: Enable AHCIJagan Teki
Enable ahci node for sun7i-a20-m5.dts, this would require since we have DM_SCSI enabled on the respective SoC. No need to send patch to Linux for this change, since this dts is U-Boot specific. Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2Jagan Teki
Sync sun7i-a20 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun7i-a20* sync: "ARM: dts: sun7i: bananapi: Add GPIO banks regulators" (sha1: 09c6572290f018d73ec2e812e28bada34d41815f) Here are U-Boot specific dts changes. - s/uart0_pins_a/uart0_pb_pins for sun7i-a20-ainol-aw1.dts sun7i-a20-m5.dts sun7i-a20-primo73.dts sun7i-a20-yones-toptech-bd1078.dts sunxi-itead-core-common.dtsi - s/gmac_pins_mii_a/gmac_rgmii_pins for sun7i-a20-m5.dts - drop i2c0, i2c1 pins from sunxi-itead-core-common.dtsi - drop mmc0 pins from sun7i-a20-primo73.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2Jagan Teki
Sync sun8i-r40 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun8i-r40* sync: "ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node" (sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef) Linux commit details about the sun8i-v40* sync: "ARM: dts: sunxi: Fix I2C bus warnings" (sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19) Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: uniphier: sync with Linux 5.1-rc4Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-16arm64: zynqmp: Define label for flash nodeSiva Durga Prasad Paladugu
Define a label for flash node so that it can be referenced easily as required. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Add spi-flash compatible string to flash nodeSiva Durga Prasad Paladugu
spi-flash compatible string is needed for reading tx and rx bus widths, hence add this compatible string to flash node. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15at91sam9260.dtsi: add some labelsHeiko Schocher
add labels to rtc, pinctrl and watchdog node. This makes it possible to reference the nodes from board dts files. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-15Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imxTom Rini
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
2019-04-14arm64: allwinner: sun50i: Sync H6 dts(i) files from LinuxJagan Teki
Usually the Linux dts changes were synced in specific tags in Allwinner, to keep track for whats been synced so-far and plan for future syncs. But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific tag since these dts(i) changes are required for new H6 boards support. Linux commit details about the sun50i-h6* sync: "arm64: dts: allwinner: h6: move MMC pinctrl to dtsi" (sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8) Linux commit details about the sun8i-tcon-top.h sync: "dt-bindings: display: sunxi-drm: Add TCON TOP description" (sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8) Part of the sync initiated by 'Clément Péron'. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-14Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-13imx6: dts: add wandboard dtb target to fix build errorAnatolij Gustschin
Fix broken build: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13imx6: tbs2910: fix dtb build errorAnatolij Gustschin
Fix broken build: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13apalis/colibri_imx6: add device trees to makefileMarcel Ziswiler
Add device trees to Makefile to avoid newly introduced error: Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1 make: *** [Makefile:1009: dts/dt.dtb] Error 2 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13ARM: dts: colibri_vf: update device treesMarcel Ziswiler
Update device tree in preparation of further driver model migration: Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller, USBH_PEN GPIO regulator. Add iomux resp. pinctrl entries to be removed from proprietary platform data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO. Introduce a U-Boot specific device tree with some required u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl. pinctrl. While at it also update the MAINTAINERS file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13imx6: wandboard: convert to DM_PMICAnatolij Gustschin
Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS. Rework power_init_board() code. Signed-off-by: Anatolij Gustschin <agust@denx.de>
generated by cgit (git 2.34.1) at 2025-01-01 14:43:58 +0000