summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2020-07-28ARM: dts: stm32: Add DHSOM based DRC02 boardMarek Vasut
Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28ARM: dts: stm32: Move ethernet PHY into SoM DTMarek Vasut
The PHY and the VIO regulator is populated on the SoM, move it into the SoM DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28ARM: dts: stm32: add seeed studio odyssey-stm32mp157c boardMarcin Sloniewski
This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C. This works with generic stm32mp1 config. Right now only booting from SD card is supported. Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-28Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"Patrick Delaunay
Since commit f13ff88b61c3 ("gpio: stm32: add ops set_dir_flags") the gpio flags are supported by stm32 pinctrl driver. The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed. This reverts commit 792919241b3d750cd5295dfe6dd1d0958b9be468. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"Patrick Delaunay
Since commit f13ff88b61c3 ("gpio: stm32: add ops set_dir_flags") the gpio flags are supported by stm32 pinctrl driver. The cd-gpios is correctly handle in U-Boot and the patch on the device tree can be removed. This reverts commit 3c2e2a1a79608c5e046313a8c47586d9a734e2a3. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28ARM: dts: stm32: add reset support to uart nodes on stm32mp15xPatrick Delaunay
STM32 serial IP can be reset via reset controller. Add the support of reset to uart nodes on stm32mp15-u-boot.dtsi, the ad-dons file for U-Boot. This patch fix issues when previous UART configuration, for example done in TF-A or ROM code, is not handled in U-Boot stm32 serial driver init. This reset property won't be not added in Linux kernel device tree as this reset is not used in Linux STM32 serial driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1Patrick Delaunay
Remove hnp-srp-disable for usbotg node because this feature is only needed for usbotg in HOST mode (in drivers/usb/host/dwc2.c) and this feature is not activated in stm32mp15 U-Boot (stm32mp15_basic_defconfig and stm32mp15_trusted_defconfig); only the device mode is activated and OTG is not supported in DWC2 driver. This patch reduces the difference between U-Boot and Linux kernel device-tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1Patrick Delaunay
DT alignment with Linux kernel v5.8-rc1 for the STM32MP15x soc device tree files and the STMicroelectronics boards device tree files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pinsPatrick Delaunay
Alignment with pins name used in Linux kernel v5.8. It is a preleminary step for device tree alignment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-28stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnentPatrick Delaunay
Save the environment at the end of the U-Boot partition, the GPT partition named "ssbl" in SD card or eMMC and avoid requirements on the "bootfs" file system generated via specific raw tools (like wic and genimage). With the previous configuration of the U-Boot environment saved in ext4 file, U-Boot need to create/modify the file uenv.txt in the ext4 file system; so this EXT4 file system need to be generated without some functionality, like metadata_csum and dir_index, because they are not supported by U-Boot. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27ARM: dts: imx7-colibri: multiple node updatesIgor Opaniuk
1. Move u-boot specific nodes to u-boot dts include: legacy lcdif node and aliases. 2. Add iomux configuration for LCD. 3. Drop un-needed u-boot,dm-pre-reloc for alias node. 4. Fix display-timings, use the one from Toradex downstream kernel [1] [1]: https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi?h=toradex_4.9-2.3.x-imx#n206 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27ARM: dts: imx6ull-colibri: move u-boot specific nodeIgor Opaniuk
1. Move aliases and legacy lcdif node to the u-boot specific dts include. 2. Provide proper display timings, as in the downstream Toradex kernel [1]. [1]: https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi?h=toradex_4.9-2.3.x-imx#n183 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27ARM: dts: imx8mm-verdin: eeprom nodes adjustmentsIgor Opaniuk
Rename EEPROM nodes. Create aliases for EEPROM to unify their order: eeprom0 - on-module EEPROM eeprom1 - carrier-board EEPROM eeprom2 - MIPI-DSI to HDMI adapter EEPROM Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-27arm: dts: ls1028a: Add dspi flash device node to qdsZhao Qiang
Add dspi flash device node to fsl-ls1028a-qds.dtsi Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27arm64: lx2160a: dts: Add watchdog nodeZhao Qiang
Add watchdog node which is sbsa into lx2160a dtsi Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27armv8: dts: ls1046a: Add the PCIe EP nodeXiaowei Bao
Add the PCIe EP node for ls1046a. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27arm: dts: lx2160a: Increase configuration window sizeWasim Khan
lx2160a rev2 requires 4KB space for type0 and 4KB space for type1 iATU window. Increase configuration size to 8KB to have sufficient space for type0 and type1 window. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27armv8: dts: fsl-lx2160a: add flash node under dspi to qds dtsZhao Qiang
Add flash node under dspi into fsl-lx2160a-qds.dtsi Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25arm: dts: k3-j721e-mcu-wakeup: Introduce chipid nodeDave Gerlach
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3 SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25arm: dts: k3-am65-wakeup: Introduce chipid nodeDave Gerlach
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3 SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-25ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev KitAdam Ford
The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also known as the RZ/G2M. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-25ARM: dts: r8a774a1: Import DTS from Linux 5.8-rc1Adam Ford
This patch imports the device tree and required bindings to permit the device tree to build for the R8Z774A1 (RZ/G2M). Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-23Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dmTom Rini
binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-22arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10Jagan Teki
Add u-boot,spl-boot-order for ROCKPi N10, so-that it can able to boot from eMMC and SDMMC in order. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add PCIe for RockPI N10Jagan Teki
This patch adds support to enable PCIe for RockPI N10. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm: dts: rockchip: Add HDMI out for RockPI N8/N10Jagan Teki
This patch adds support to enable HDMI out for N10 and N8 combinations SBCs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rockchip: Add USB for RockPI N8/N10Jagan Teki
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0 ports. This patch adds support to enable all these USB ports for N10 and N8 combinations SBCs. Note that the USB 3.0 port on RockPI N8 combination works as USB 2.0 OTG since it is driven from RK3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rockchip: Add usb host0 ohci node for rk3288Jagan Teki
rk3288 and rk3288w have a usb host0 ohci controller. Although rk3288 ohci doesn't actually work on hardware, but rk3288w ohci can work well. So add usb host0 ohci node in rk3288 dtsi and the quirk in ohci platform driver will disable ohci on rk3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm: dts: rockchip: Sync rk3288 dtsi from linuxSuniel Mahesh
This sync has changes required to use HDMI CEC pin in U-Boot. Sync dts from linux v5.8-rc5 commit: "ARM: dts: rockchip: define the two possible rk3288 CEC pins" (sha1: 838980dd04e994bf81cf104fa01ae60802146b39) Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from LinuxJagan Teki
Sync ROCKPi N8/N10 dts(i) changes from Linux. commit <afd9eb880414> ("ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support") Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add Radxa ROCK Pi 4C supportJagan Teki
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22arm64: dts: rockchip: Add ROCKPi 4A/4B supportJagan Teki
Rock PI 4 has 3 variants of hardware platforms called RockPI 4A, 4B, and 4C. - Rock PI 4A has no Wif/BT. - Rock PI 4B has AP6256 Wifi/BT, PoE. - Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enable GPIO pin change compared to 4B, 4C So move common nodes, properties into dtsi file and include on respective variant dts files. Use 4B dts into default rock-pi-4 defconfig until we find any solution for dynamic detection of these variants. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rk3328-rock64: Add SPI Flash supportJohannes Krottmayer
Add U-Boot SPI Flash support for the PINE64 Rock64 board Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22ARM: dts: rk3328: Add SPI supportJohannes Krottmayer
Add U-Boot SPI support for the RK3328 Signed-off-by: Johannes Krottmayer <krjdev@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (fix checkpatch error for code ident) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: board: add Hardkernel Odroid Go2 boardHeiko Stuebner
Also known as Odroid Go Advance but named Go2 internally by the vendor it seems. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: px30: sync Odroid Go Advance devicetree from LinuxHeiko Stuebner
Get the devicetree from mainline Linux and include it for U-Boot uses. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-22rockchip: px30: sync the main rk3326 dtsi from mainlineHeiko Stuebner
The rk3326 is just a trimmed down px30 from a software perspective, so the mainline rk3326 dtsi also ist just a tiny addition. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-20arm: dts: k3-j721e-mcu-wakeup: Introduce chipid nodeDave Gerlach
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3 SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-20arm: dts: k3-am65-wakeup: Introduce chipid nodeDave Gerlach
Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3 SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-17Merge tag 'u-boot-imx-20200716' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.10 ---------------- - i.MX DDR driver fix/update for i.MX8M - i.MX pinctrl driver fix. - Use arm_smccc_smc to remove imx sip function - i.MX8M clk update - support booting aarch32 kernel on aarch64 hardware - fused part support for i.MX8MP - imx6: pcm058 to DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/708734785
2020-07-16arm: dts: imx7: Fix error in coresight TPIU graph connectionIlko Iliev
OF graph endpoint connections must be bidirectional and dtc warn if they are not. i.MX7 based DTs have an error and generate warnings: arch/arm/dts/imx7d-sdb.dtb: Warning (graph_endpoint): /replicator/ports/port@0/endpoint: graph connection to node '/soc/tpiu@30087000/port/endpoint' is not bidirectional arch/arm/dts/imx7d-sdb.dtb: Warning (graph_endpoint): /soc/tpiu@30087000/port/endpoint: graph connection to node '/replicator/ports/port@1/endpoint' is not bidirectional Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2020-07-14arm: imx6q: pcm058: Convert pcm058 to use DM with DTsNiel Fourie
Convert pcm058 support to use device trees and the driver model. Add rudimentary boot scripts to the environment, expand README. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14arm: dts: imx6q: Add Linux dts files for Phytec MiraNiel Fourie
Add Phytec Mira device tree files, for use with pcm058. >From Linux 5.6, commit 7111951b8d49 upstream Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-13arm: dts: k3-am65: Sync CPSW DT node from kernelVignesh Raghavendra
Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13arm: dts: k3-j721e: Sync CPSW DT node from kernelVignesh Raghavendra
Sync CPSW DT node from Kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DTVignesh Raghavendra
Sync DT bindings from kernel DT and move them to out of -u-boot.dtsi files. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-07-11Merge tag 'uniphier-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.10 - remove workaround for Cortex-A72 - increase U-Boot proper size to 2MB - sync DT with Linux - add system bus controller driver - improve serial driver - add reset assertion to Denali NAND driver
generated by cgit (git 2.34.1) at 2025-02-07 16:58:48 +0000