summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-10-11arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster nodeLokesh Vutla
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS) subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within the MCU domain, and the remaining two clusters are present in the MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - ATCM and BTCM (further interleaved into two banks). There are some IP integration differences from standard Arm R5 clusters such as the absence of an ACP port, presence of an additional TI-specific Region Address Translater (RAT) module for translating 32-bit CPU addresses into larger system bus addresses etc. Add the DT node for the MCU domain R5F cluster/subsystem, the two R5 cores are added as child nodes to the main cluster/subsystem node. The cluster is configured to run in LockStep mode by default, with the ATCMs enabled to allow the R5 cores to execute code from DDR with boot-strapping code from ATCM. The inter-processor communication between the main A72 cores and these processors is achieved through shared memory and Mailboxes. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11armv7R: dts: k3: am654: Add MCU_UART0 related definitionsAndreas Dannenberg
Although we currently use the MAIN_UART0 for R5 SPL console output there are cases where we require access to the MCU_UART0 as well for example in case of UART-based Y-Modem boot. To support these scenarios add related DTS definitions to be able to use that UART early on. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-09Merge tag 'xilinx-for-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2020.01 FPGA: - Enable fpga loading on Versal - Minor fix Microblaze: - Fix LMB configurations to support initrds - Some other cleanups Zynq: - Minor config/dt changes - Add distro boot support for usb1 and mmc1 - Remove Xilinx private boot commands and use only distro boot ZynqMP: - Kconfig cleanups, defconfig updates - Update some dt files - Add firmware driver for talking to PMUFW - Extend distro boot support for jtag - Add new IDs - Add system controller configurations - Convert code to talk firmware via mailbox or SMCs Versal: - Add board_late_init() - Add run time DT memory setup - Add DFU support - Extend distro boot support for jtag and dfu - Add clock driver - Tune mini configurations Xilinx: - Improve documentation (boot scripts, dt binding) - Enable run time initrd_high calculation - Define default SYS_PROMPT - Add zynq/zynqmp virtual defconfig Drivers: - Add Xilinx mailbox driver for talking to firmware - Clean zynq_gem for Versal - Move ZYNQ_HISPD_BROKEN to Kconfig - Wire genphy_init() in phy.c - Add Xilinx gii2rgmii bridge - Cleanup zynq_sdhci - dwc3 fix - zynq_gpio fix - axi_emac fix Others: - apalis-tk1 - clean config file
2019-10-09Merge tag 'u-boot-imx-20191009' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191009 ------------------- Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532 - MX6UL / ULZ - Toradex board - Allow to set OCRAM for MX6Q/D - MX7ULP - MX8: (container image, imx8mq_mek), SCU API - fix several board booting from SD/EMMC (cubox-i for example) - pico boards [trini: display5 merged manually] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08pico-imx7d: Remove dead code for dm_videoJoris Offouga
Since convert dm_video, unused code introduced, so remove this Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08imx: Add i.MX8MM EVK board support.Peng Fan
Add board and SoC dts Add ddr training code support SD/MMC/GPIO/PINCTRL/UART Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: add i.MX8MM pin funcPeng Fan
Import i.MX8MM pin func from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08arm: dts: import i.MX8MM dtsiPeng Fan
Import i.MX8MM dtsi from Linux Kernel, commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: add the i.MX8M reset controller nodePatrick Wildt
This patch adds the reset controller node to the i.MX8MQ SoC device tree. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08imx: add support for i.MX8MQ power domain controllerPatrick Wildt
Add support for the power domain controller that's used on the i.MX8MQ. This will be needed to be able to power on the PCIe controller. Bindings taken from Linux, driver implementation taken from the i.MX8 power domain controller and adjusted for the i.MX8M SoC. Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08ARM: dts: pcl063: add usdhc reset pin of eMMCParthiban Nallathambi
pcl063 phycore SoM with eMMC also got usdhc reset pin, add reset pin to pinmux. Signed-off-by: Parthiban Nallathambi <pn@denx.de>
2019-10-08imx: wandboard: convert FEC support to DM_ETHAnatolij Gustschin
Remove CONFIG_DM_ETH conversion warning to avoid board removal. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi fileLukasz Majewski
After this change it is possible to use imx28-<board>-u-boot.dtsi with the imx28-u-boot.dtsi explicitly included without breaking setup from imx28-<board>.dts file. The problem is that the imx28.dtsi included in a wrong place overrides the changes made in imx28-<board>.dts. As a result some devices are "disabled" in the final DTB. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)Lukasz Majewski
This commit enables support for CONFIG_WDT in the U-Boot proper. Moreover, the SYSRESET_WATCHDOG driver is used to support 'reset' command. As SPL is not yet ready for DM conversion, the CONFIG_HW_WATCHDOG is enabled for it. This allows the legacy SPL code to work properly. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08pico-imx6: Add initial supportFabio Estevam
Add the initial support for the pico-imx6 variants. DDR initialization is based on the TechNexion's U-Boot code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08configs: pico-imx7d: Convert to DM_VIDEOJoris Offouga
This commit convert all pico-imx7d to DM_VIDEO Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08ARM: dts: pico-imx7d: sync device tree with v5.3-rc6Joris Offouga
Synchronize device tree with v5.3-rc6 label Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts changeJoris Offouga
This commit introduce u-boot.dtsi Signed-off-by: Joris Offouga <offougajoris@gmail.com> Suggested-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsiPeng Fan
The changes were added by following patch: commit <9002e735e717> ("imx: mx6sabresd: fix boot hang with video") commit <f45ec8fcfb86> ("imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes") Let's move the U-Boot specific change to imx6qdl-u-boot.dtsi Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08nitrogen6x: migrate to using device treeTroy Kisky
Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio commandPeng Fan
The gpio command currently uses equal bank names "GPIO0_" for all existing gpio banks, i. e.: U-Boot# gpio status -a Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... Bank GPIO0_: GPIO0_0: input: 0 [ ] GPIO0_1: input: 0 [ ] ... So the command is broken, it is not possible to address a desired bank. Add gpio aliases to fix this. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: mx6ul_14x14_evk: convert to DM_VIDEOPeng Fan
To support DM_VIDEO, Add display node for lcdif Drop board iomuxc settings. Enable DM_VIDEO Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08imx: add i.MX6ULZ boardPeng Fan
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible with i.MX6ULL. so most code of i.MX6ULL can be reused by i.MX6ULZ. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: import dts for i.MX6ULZPeng Fan
Import kernel dts for i.MX6ULZ from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: sync dts for i.MX6ULLPeng Fan
Sync kernel dts for i.MX6ULL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm: dts: sync dts for i.MX6ULPeng Fan
Sync kernel dts for i.MX6UL from commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08arm64: zynqmp: add firmware and mailbox node to DTIbai Erkiaga
The following patch adds a mailbox node and firmware node to following the mainline DT. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add a2197 memory board revAMichal Simek
Similar to processor board but i2c structure is completely different. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add System Controller for a2197-g/pMichal Simek
Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-10-08arm64: zynqmp: Add generic a2197 system controller configMichal Simek
Add generic configuration for a2197-p/-m/-g boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Switch spi-flash to jedec, spi-nor compatibleMichal Simek
Change has been done across the whole tree only zynqmp-mini-qspi hasn't been fixed. Origin changed done by commit ffd4c7c2ecb7 ("dts: switch spi-flash to jedec, spi-nor compatible") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: dts: Added alias for usb nodeVipul Kumar
This patch added alias for usb node in dts file. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Align model name with DTMichal Simek
Use model property to distinguish different configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add u-boot,dm-pre-reloc to clk300 nodeMichal Simek
This node is used by qspi driver for supporting qspi boot mode in SPL. Similar changes have beeen done by commit a9022b017a90 ("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: dts: at91: sam9x60ek: add onewire supportEugen Hristev
Add support for onewire memory. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08ARM: dts: at91: sam9x60: add onewire nodeEugen Hristev
Add onewire node for w1 support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08ARM: dts: at91: sam9x60ek: Enable qspi nodeTudor Ambarus
The sam9x60 qspi controller uses 2 clocks, one for the peripheral register access, the other for the qspi core and phy. Both are mandatory. Enable the qspi node together with the SST26VF064B qspi nor flash memory. Booting from the QSPI NOR flash is now possible. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08ARM: dts: at91: sam9x60: Add macb0 Ethernet controllerNicolas Ferre
Add Ethernet controller to dtsi file and enable it on sam9x60ek platform connected with rmii. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08ARM: dts: Add dts files for sam9x60ekSandeep Sheriker Mallikarjun
add device tree files for sam9x60ek board with below changes. - Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit) - Add the reg property for the pinctrl node. - Add the "u-boot,dm-pre-reloc" property to determine which nodes are used by the board_init_f stage. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> [prasanthi.chellakumar@microchip.com: fix style/whitespace issues] Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com> [nicolas.ferre@microchip.com: - fix gclk, - fix pio/pinctrl controller definition and allow to have more than only PIOA for this SoC, - removing pinctrl address] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [claudiu.beznea@microchip.com: - use SAM9X60's compatible for pinctrl - add drive strength and slew rate options for SDMMC0 pins.] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> [tudor.ambarus@microchip.com: - u-boot,dm-pre-reloc property in dedicated file, - fix pit len, starts from 0xFFFFFE40 and it is of len 0x10] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08ARM: dts: at91: sama5d27_wlsom1: add hlcdc nodeEugen Hristev
Add node for hlcld for u-boot logo display at boot. This is compatible with the Precision Design Associates (PDA) TM5000 screen. Timings are compatible with simple panel from Linux, panel name is pda_91_00156_a0 Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspiEugen Hristev
Add node for qspi1 memory connected on the wlsom Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08ARM: dts: at91: sama5d2: add seq for qspi1Eugen Hristev
qspi1 does not have an alias/seq number. This is required for SPL default SF bus booting for the boards that have this SoC Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08board: atmel: add sama5d27_wlsom1_ek boardNicolas Ferre
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10 Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-04ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPLAdam Ford
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and usdhc2. This creates the missing imx6q-logicpd-u-boot.dtsi file which will enable these functions so SPL can properly setup UART, detect microSD card, and startup. Fixes: 8f4691e31a18 ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-09-30ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulatorMarek Vasut
This patch restores commit c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator"), which was accidentally dropped during DT resync in commit 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0"). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Fixes: 317d13ac6307 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-19rockchip: rk3288-tinker: Attach missing peripherals at SPLMichael Trimarchi
Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use and mark them as dm,spl so-that it would initialize at SPL. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add emmc hs200 support - Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-13ARM: dts: dra74x: Fix iodelay configuration for mmc3Faiz Abbas
According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values are configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13arm: am437x: cm-t43: Add device tree, enable OF_CONTROLSuniel Mahesh
Add device tree from Linux for driver model conversion and enable OF_CONTROL. This will remove the following compile warning: ================================================== Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=<device_tree>' argument =================================================== Target was compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
generated by cgit (git 2.34.1) at 2025-01-22 15:22:41 +0000