summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-09-12arm: dts: ls1028a-qds: define the MDIO MUXAlex Marginean
Add the device-tree structure describing the MUX in board dts. QDS board has an on-board RGMII PHY and 4 slots for extension cards. All these can be accessed over MDIO through a MDIO MUX controlled over I2C. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for ls1028ardbYinbo Zhu
Add emmc hs200 support for ls1028ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for lx2160ardbYinbo Zhu
Add emmc hs200 support for lx2160ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12dts: armv8: add emmc hs200 support for ls1012ardbYinbo Zhu
Add emmc hs200 support for ls1012ardb Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-08Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
Bug fixes to mmc_spi Add Aspeed SD driver Fix dw_mmc timeout calculation Fix timeout values passed to mmc_wait_dat0 sdhci dt caps/mask update [trini: Fix evb-ast2500_defconfig CONFIG_MMC line] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-05ARM: dts: ast2500: Add SDHCI nodesEddie James
Add nodes for the Aspeed SD controllers with their necessary properties. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-04arm: dts: Set custom names for cp110 master/slave MDIO busesAlex Marginean
Implicitly Marvell MDIO driver uses DT node names for devices, but in this case that is not unique. Set MDIO device names for master/slave to cpm/cps. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-01Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- r8a66597 usb changes
2019-08-27stm32mp1: Add remoteproc support for m4 coprocessorPatrick Delaunay
Alignment with kernel patch proposal for binding: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c https://lkml.org/lkml/2019/5/14/159 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: Update the way vdd-supply is retrieved from DTPatrick Delaunay
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply and is a subnode of pwr-regulators. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: support of error led on ed1/ev1 boardPatrick Delaunay
Create a function led_error_blink and add node in device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 bootPatrick Delaunay
As for Audio codec IC, HDMI IC is not "IO safe". HDMI regulators (v3v3 and v1v2) must be enabled to allow I2C1 bus usage. HDMI IC must be under reset during power up and keep HDMI and AUDIO devices in reset while they are not used in U-Boot to keep them in low power mode (each device can be kept in reset independently keeping their power supplies ON until kernel). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINKPatrick Delaunay
Avoid U-Boot auto-boot interruption for line break detection on console when the RX line connected to STLINK is floating (-IO error in getc cause by framing error and testc return 1) Same workaround is applied on all the STMicroelectonics board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: add key support on DK1/DK2Patrick Delaunay
Allow to use PA13 and PA14 to force fastboot mode or STM32CubeProgrammer mode. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC filePatrick Delaunay
The pre-relocation probe is needed to reserve video frame buffer in video_reserve() for all the board; LDTC must be tagged prereloc in SOC U-Boot dtsi file. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: Add PSCI node access before relocationPatrick Delaunay
Add node in DT and avoid error to search UCLASS_SYSRESET in board_f.c::print_resetinfo() and lost 1.6s in U-Boot for the trusted boot chain. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: Add iwdg2 support for SPLPatrick Delaunay
This patch adds independent watchdog support for stm32mp157c in SPL. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: DDR config v1.45Patrick Delaunay
Update DDR configuration with the latest update: - Change DQSGE to 1 for DDR3, to cure missing DQS preamble. Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: sync device tree with v5.3-rc2Patrick Delaunay
Synchronize device tree with v5.3-rc2 label and update the associated u-boot dtsi. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stih410-b2260: Sync DT with kernel v5.2Patrice Chotard
Synchronize U-boot DT with kernel v5.2 for stih410-b2260. Update stih410-b2260-u-boot.dtsi accordingly. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-08-26ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin muxAdam Ford
When the pinmux configuration was added, it was accidentally placed into the omap3_pmx_wkup node when it should have been placed into the omap3_pmx_core. This error was accidentally propagated to U-Boot by me when I blindly copied the device tree from Linux. This patch moves the i2c2_pins and i2c3_pins to the correct node which should eliminate i2c bus errors and timeouts due to the fact the bootloader uses the save device tree that no longer properly assigns these pins. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-23rockchip: rk3288: remove fennec board supportKever Yang
Since there is no one using this board, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23rockchip: dts: rk3328-rock64: fix usb power supplyKever Yang
According to rock64 schemetic, both VCC_HOST1_5V and VCC_HOST_5V are controlled by USB20_HOST_DRV(GPIO0A2), fix it so that we can get correct power supply for USB HOST ports. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23rockchip: rk3328: migrate u-boot node to -u-boot.dtsiKever Yang
Move all the nodes only shown in u-boot to -u-boot.dtsi to make rk3328.dtsi clean. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23rockchip: dts: rk3328-rock64: enable usb3 xhci controllerKever Yang
Rock64 has a USB3.0 port, enable the controller so that we can use it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-22ARM: renesas: Enable R8A66597 USB host on GR PeachMarek Vasut
Enable USB host support on GR Peach board. To use USB host on GR Peach, it might be necessary to solder JP3 header onto the board first and then short it. Shorting JP3 is mandatory to let the U5 regulator to supply VBUS to the CN3 USB port. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22armv8: dts: ls1088aqds : Add pcf2127 nodeChuanhua Han
Add the pcf2127-rtc node under the i2c0->i2c-mux@77->i2c@3 for ls1088aqds boards. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controllerChuanhua Han
This patch adds some slave nodes to support the i2c dm on the device side under the i2c0 controller. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls1088a: add I2C node supportChuanhua Han
One ls1088a, there are four I2C controllers. So add all I2C node for ls1088a in device tree. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls2088aqds : Add ds3232 nodeChuanhua Han
Add the ds3232-rtc node under the i2c0->i2c-mux@77->i2c@0 for ls2088aqds boards. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls2088ardb: Add slave nodes under the i2c0Chuanhua Han
Add some slave nodes to support the i2c dm on the device side under the i2c0. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: fsl-ls2088a: add i2c node supportchuanhua han
One ls2088a, there are four I2C controllers. So add I2C nodes in dts for ls2088a. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls1028aqds: Add pcf2127 node under i2c1Chuanhua Han
Add the pcf2127-rtc node under the i2c1 in dts for ls1028aqds boards. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls1028aqds: Add pca9547 node under the i2c0 controllerChuanhua Han
Add pca9547 node to support i2c multiplexer under the i2c0 controller in dts for ls1028aqds boards. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controllerChuanhua Han
Add some slave nodes to support the i2c dm on the device side under the i2c0. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: lx2160aqds : Add pcf2127 nodeChuanhua Han
Add the pcf2127-rtc node under the i2c0->i2c-mux@77->i2c@3 in dts for lx2160aqds boards. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: lx2160ardb : Add the "u-boot, dm-pre-reloc" for i2c0Chuanhua Han
Lx2160ardb need to use i2c0 before relocation, so we also need to set u-boot, dm-pre-reloc to initialize node before relocation. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: Add pcf2127 node for lx2160ardbChuanhua Han
Adds the pcf2127-rtc node under the i2c4 node dts of lx2160ardb boards. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodesChuanhua Han
In lx2160a soc, there are eight i2c controllers, this patch adds i2c nodes for lx2160a, and the gpio2 nodes on which the i2c4 controller depends. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-20arm: dts: Makefile: clean *dtb_HSSuniel Mahesh
TI HS platforms generate *dtb_HS binary blobs and there is no rule for cleanup. Added entry for cleanup in clean-files target. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-08-19rockchip: rk3399: Add ROC-RK3399-PC supportLevin Du
Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Various improvements to Keymile boards - mostly DT conversation (Pascal & Holger) - Removal of now unsupported Keymile boards (Pascal & Holger) - Small MVEBU PCI fix (Marek) - Turris Omnia defconfig update (Marek) - Misc Allied Telesis defconfig updates (Chris)
2019-08-12Merge tag 'u-boot-amlogic-20190812' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - amlogic: add support for the SEI Robotic SEI510
2019-08-12Merge branch '2019-08-11-ti-imports'Tom Rini
- More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
2019-08-12arm: dts: k3-am65: add support for PCIe and SERDESSekhar Nori
Add needed device-tree nodes to support PCIe 0 and SERDES on AM65x SoC. The nodes are kept disabled by default. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12board/BuR/brsmarc1: initial commitHannes Schmelzer
This commit adds support for the B&R brsmarc1 SoM. The SoM is based on TI's AM335x SoC. Mainly vxWorks 6.9.4.x is running on the board, doing some PLC stuff on various carrier boards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-12ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1Neil Armstrong
Import Linux 5.2-rc1 sei510 DT from 5f9e832c1370 ("Linus 5.3-rc1") for the meson-g12a-sei510 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12km/uart: port UART interface of KM Kirkwood boards to driver modelPascal Linder
Activate the driver model for the serial interface in the KM Kirkwood Kconfig file. The associated preprocessor definitions could be removed from the header file. However, the clock of 200 MHz needs to be declared in the device tree. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-11arm: dts: Add devicetree for Hikey960 boardManivannan Sadhasivam
This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11arm: dts: Import HI3660 devicetree from LinuxManivannan Sadhasivam
This commit imports HI3660 SoC devicetree from Linux Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
generated by cgit (git 2.34.1) at 2024-12-27 08:05:59 +0000