summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2019-07-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Beelink-x2 STB support (Marcus) - H6 DDR3, LPDDR3 changes (Andre, Jernej) - H6 pin controller, USB PHY (Andre)
2019-07-15arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defsGrygorii Strashko
Add mcu cpsw nuss pinmux and phy defs required by cpsw. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15arm64: dts: ti: k3-am65: add mcu cpsw nodeGrygorii Strashko
Add mcu cpsw and its components along with scm_conf node to have ethernet functional. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15sun8i: h3: Add support for the Beelink-x2 STBMarcus Cooper
The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a dual colour LED and an optical S/PDIF connector. Linux commit details about the sun8i-h3-beelink-x2.dts sync: "ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2" (sha1: cc4bddade114b696ab27c1a77cfc7040151306da) Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-14Merge tag 'u-boot-stm32-20190712' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
2019-07-13ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTBAdam Ford
Since we have limited resources in SPL, it is the best interest to keep the SPL as small as possible and that includes the DTB. There are a few items in the device tree that can be removed, because these boards don't use them. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13ARM: dts: logicpd-som-lv: Resync with Kernel 5.1.9Adam Ford
The MMC card-detect pin was incorrectly defined which was fixed. This patch resync's the dts and removes the u-boot specific fix. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13ARM: dts: da850: Resync with Linux 5.1.9Adam Ford
The da850.dtsi file had some changes. This patch pulls in the changes from Kernel 5.1.9 Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13ARM: am335x: Add phyCORE AM335x R2 supportNiel Fourie
Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec phyBOARD-Wega AM335x. CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-WEGA DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit 37624b58542f ("Linux 5.1-rc7") Signed-off-by: Niel Fourie <lusus@denx.de> Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Marek Vasut <marex@denx.de>
2019-07-13ARM: legoev3: convert to driver modelDavid Lechner
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI and SPI_FLASH are converted. The device tree contains only the minimal nodes required by U-Boot since the size of U-Boot is limited to 256K on this device. Signed-off-by: David Lechner <david@lechnology.com>
2019-07-13ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5Derald D. Woods
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2019-07-12ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible stringPatrice Chotard
Since pinctrl_stm32 driver update, each gpio bank is now binded by pinctrl driver. The compatible string "st,stm32-gpio" becomes useless, remove it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12ARM: dts: stm32mp1: sync device tree with v5.2-rc4Patrick Delaunay
Synchronize device tree with v5.2-rc4 label and update the associated u-boot dtsi. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12stm32mp1: syscon: remove stgenPatrick Delaunay
Reduce difference with kernel Linux device tree. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12ARM: dts: stm32: Add ipcc mailbox support on stm32mp1Fabien Dessenne
Add IPCC mailbox support on stm32mp157 eval and disco boards. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- SPL SATA enhancements to allow booting from RAW SATA device needed for Clearfog (Baruch) - Enable SATA booting on Clearfog (Baruch) - Misc changes to Turris Omnia (Marek) - Enable CMD_BOOTZ and increase SYS_BOOTM_LEN on crs305-1g-4s (Luka) - Enable FIT support for db-xc3-24g4xg (Chris) - Enable DM_SPI on Keymile Kirkwood board with necessary changes for this (Pascal) - Set 38x and 39x AVS on lower frequency (Baruch)
2019-07-11km/spi: add SPI configuration to KM Kirkwood device treePascal Linder
In order to migrate the SPI flash interface to the driver model, the SPI configuration needs to be added in the KM Kirkwood device tree file. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: clearfog: enable SATA in SPLBaruch Siach
Enable SATA peripherals in SPL to allow boot from SATA. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-10arm64: dts: uniphier: add reserved-memory for secure memoryMasahiro Yamada
[ Linux commit aa38571246c6ac279ebebd141157297bcb959d76 ] The memory regions specified by /memreserve/ are passed to early_init_dt_reserve_memory_arch() with nomap=false, so it is not suitable for reserving memory for Trusted Firmware-A etc. Use the more robust /reserved-memory node with the no-map property to prevent the kernel from mapping it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-09ARM: dts: at91: sama5d2_xplained: fix QSPI0 nodeCyrille Pitchen
Fix the following: - use "jedec,spi-nor" binding, we use jedec compatible flashes - set bus width to 4, we use quad capable flashes - differentiate bewteen data and clk and cs pins - drop partions as we don't use them in u-boot. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> [tudor.ambarus@microchip.com: use "jedec,spi-nor", edit commit message] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-07-05Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-bootTom Rini
- fix complation error for CONFIG_USB - update RPi3 DTBs to v5.1-rc6 state - add defconfig for RPi3 B+ - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
2019-07-04wandboard: Add FIT image supportFabio Estevam
After the transition to DM, only the mx6dl/solo wandboard is supported. Add FIT image support so that all the wandboard variants can be supported, like it was prior to the DM conversion. Successfully booted Linux on mx6q/solo/qp wandboards. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Add mmc0 aliasFabio Estevam
Add a mmc0 alias so that U-Boot proper can associate mmc0 with the boot SD card. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Import extra wandboard devicetree filesFabio Estevam
Import wandboard devicetree files so that the mx6q and mx6qp variants can be properly supported. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04wandboard: Sync with devicetree files from kernel 5.1.9Fabio Estevam
Udate the wandboard devicetree files with the ones from kernel 5.1.9. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04mx6: dts: Move dtbs under SoC levelFabio Estevam
Place dtbs under SoC level rather than board level. imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were placed under the board config option, so move them to SoC level. This also aligns with the kernel dts Makefile format. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04mx6: dts: Keep dtb entries sortedFabio Estevam
Keep dtb entries sorted to help adding new dtbs in an organized form. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-02rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in splKever Yang
rockchip pinctrl driver has update to use dts, so we need to add the pinctrl config in SPL for sdmmc. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dtsKever Yang
Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts into rk3288-tinker-u-boot.dtsi. When both board level and soc level '-u-boot.dtsi' files exist, we need to include the soc level 'rk3288-u-boot.dtsi' manually. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: rk3288: move reloc tag into -u-boot dtsKever Yang
Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi into rk3288-u-boot.dtsi. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: rk3399: rockpro64: Provide init voltageMark Kettenis
Add missing regulator-init-microvolt property to vdd_log regulator. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Rebase on latest u-boot-rockchip master) Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
2019-06-28Merge tag 'u-boot-imx-20190628' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board
2019-06-28Merge tag 'u-boot-stm32-20190628' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm STM32 MCU fixes/cleanup: - Fix SPL console for STM32F769 Discovery - Fix Memory Protection Unit size for STM32F4 series - Cleanup DT for STM32F746 Discovery
2019-06-28ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in ↵Patrice Chotard
stm32f746-disco-u-boot.dtsi As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc" property, no need to add them again in stm32f746-disco-u-boot.dtsi. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-discoPatrice Chotard
This allow to get console output in SPL for stm32f769-disco. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-27ARM: dts: imx: m53menlo: Import M53Menlo DT from LinuxMarek Vasut
Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 . Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi, the GPIO controllers need to be inited early, otherwise m53_set_clock() won't be able to detect the correct CPU clock frequency by reading the GPIO. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27ARM: dts: imx: imx53: Synchronize iMX53 DT with LinuxMarek Vasut
Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 , this is needed to get NFC, UART, USBOTG DT nodes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-26rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2Jagan Teki
u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific properties. Move them into rk3399-u-boot.dtsi so the boards which enabled these node will available during SPL. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: dts: rk3328: add rk3328-rock64.dtsMatwey V. Kornilov
rk3328-rock64.dts has been taken from Linux kernel commit cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64") with minor modifications (drop nodes not known by rk3328.dtsi). Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-20Merge tag 'u-boot-stm32-20190619' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Update STM32MP entry in MAINTAINERS - Handle correctly binding for g-tx-fifo-size for USB DWC2 driver - Fix trusted STM32MP1 defconfig with correct ethernet driver
2019-06-19ARM: dts: stm32mp1: remove override for g-tx-fifo-sizePatrick Delaunay
Remove the override for usbotg_hs on g-tx-fifo-size as the correct binding, used in the kernel device tree, is now supported in dwc2 device driver. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-19armv8: ls1046afrwy: Add support for LS1046AFRWY platformVabhav Sharma
LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19arm: ls1028a: define the integrated PCI bus (ECAM)Alex Marginean
LS1028A includes an integrated PCI bus with 11 PCI functions residing on bus 0. ECAM plus the device register space takes up 256MB of address space. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19ARM: dts: ls1021a: Fixed reg for sata nodePeng Ma
This patch is to fixed the reg read to "0" for armv7 architecture. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: lx2160aqds: Enable eSDHC controllersYinbo Zhu
This patch is to enable esdhc controllers for lx2160aqds Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: ls1028a: Add ecc address node for sata.Peng Ma
Move the ecc addr from driver to dts Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19armv8: lx2160aqds: Enable sataPeng Ma
Change sata node status to enable sata. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-14arm: dts: Stratix10: Enable i2cLey Foon Tan
Enable i2c1 in Stratix 10 devkit. SOCFPGA_STRATIX10 # i2c bus Bus 0: i2c@ffc02900 SOCFPGA_STRATIX10 # i2c dev 0 Setting bus to 0 SOCFPGA_STRATIX10 # i2c probe Valid chip addresses: 14 4C 51 68 74 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-06-12fdt: update bcm283x device tree sources to Linux 5.1-rc6 stateHeinrich Schuchardt
Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-06-11Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-bootTom Rini
- Add Ethernet support for STM32MP1 - Add saveenv support for STM32MP1 - Add STM32MP1 Avenger96 board support - Add SPI driver suport for STM32MP1 - Add watchdog support for STM32MP1 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
generated by cgit (git 2.34.1) at 2025-02-07 18:40:06 +0000