summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-fsl-layerscape
AgeCommit message (Collapse)Author
2018-09-27armv8: ls1043a: add icid setup supportLaurentiu Tudor
Reuse the existing ICID setup code done for LS1046A smmu enablement and add the equivalent setup for LS1043A chips. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1043a: advertise QMan v3 in configurationLaurentiu Tudor
The QMan IP block in this SoC is version 3.2 so advertise this in the SoC configuration header. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: fsl-layerscape: add missing qe base address defineLaurentiu Tudor
Add define for QUICC Engine register block base address. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> [York S: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27u-boot: fixup the iommu-map property of fsl-mc nodeNipun Gupta
The iommu-map property in the fsl-mc node is updated by valid stream-ids by u-boot. This patch is to fixup this property for LS208x and LS1088. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: layerscape: Enable EHCI access for LS1012ARan Wang
Program Central Security Unit (CSU) to grant access to USB 2.0 controller. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: rewrite commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: layerscape: move ns_dev[] define from h to c file.Ran Wang
Move ns_dev[] from header file to C file to avoid compiling warning when header file is included by others. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: rewrite commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: ls1046a: setup SEC ICIDs and fix up device treeLaurentiu Tudor
Add support for SEC ICID configuration and apply it for ls1046a. Also add code to make the necessary device tree fixups. Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: ls1046a: setup fman ports ICIDs and device treeLaurentiu Tudor
Add support for ICID setting of fman ports and the required device tree fixups. Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: ls1046a: add icid setup for qman portalsLaurentiu Tudor
Add support for ICID setting of qman portals and the required device tree fixups. Also fix an endiness issue in portal setup code. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: ls1046a: initial icid setup supportLaurentiu Tudor
Add infrastructure for ICID setup and device tree fixup on ARM platforms. This include basic ICID setup for several devices. Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: fsl-layerscape: add missing debug stream IDLaurentiu Tudor
Add a define with a value for the missing debug stream ID. Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10misc: fsl_portals: setup QMAN_BAR{E} also on ARM platformsLaurentiu Tudor
QMAN_BAR{E} register setup was disabled on ARM platforms, however the register does need to be set. Enable the code also on ARMs and fix the CONFIG_SYS_QMAN_MEM_PHYS define to the correct value so that the newly enabled code works. Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: ls1046a: advertise QMan v3 in configurationLaurentiu Tudor
The QMan IP block in this SoC is version 3.2 so advertise this in the SoC configuration header. Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-08-10armv8: fsl-layerscape: add missing register blocks base address definesLaurentiu Tudor
Add defines for the edma and qdma register block base addresses. Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: layerscape: spl: Initialize QSPI AHB for QSPI bootYork Sun
To get full access of QSPI space, initialize AHB interface. Signed-off-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: fsl: remove sata supportYuantian Tang
Remove the old implementation in order to enable DM for sata. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-22armv8: layerscape: csu: enable ns access to PFE registersCalvin Johnson
Enable all types of non-secure access to PFE block registers. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECCCalvin Johnson
1. Set AWCACHE0 attribute of PFE DDR and HDBUS master interfaces to bufferable. 2. Set RD/WR QoS for PFE DDR and HDBUS AXI master interfaces. 3. Disable ECC detection for PFE. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structureCalvin Johnson
SoC specific PFE macros are defined and structure ccsr_scfg is updated with members defined for PFE. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22armv8: fsl-layerscape: Add support of GPIO structurePrabhakar Kushwaha
Layerscape Gen2 SoC supports GPIO registers to control GPIO signals. Adding support of GPIO structure to access GPIO registers. Signed-off-by: Pratiyush Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-23board: common: vid: Add support for LTC3882 voltage regulator chipRajesh Bhagat
Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23armv8: lsch3: Add serdes and DDR voltage setupRajesh Bhagat
Adds SERDES voltage and reset SERDES lanes API and makes enable/disable DDR controller support 0.9V API common. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10drivers/misc: Share qbman init between archsAhmed Mansour
This patch adds changes necessary to move functionality present in PowerPC folders with ARM architectures that have DPAA1 QBMan hardware - Create new board/freescale/common/fsl_portals.c to house shared device tree fixups for DPAA1 devices with ARM and PowerPC cores - Add new header file to top includes directory to allow files in both architectures to grab the function prototypes - Port inhibit_portals() from PowerPC to ARM. This function is used in setup to disable interrupts on all QMan and BMan portals. It is needed because the interrupts are enabled by default for all portals including unused/uninitialised portals. When the kernel attempts to go to deep sleep the unused portals prevent it from doing so Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10armv8: layerscape: sata: refine port register configurationYuantian Tang
Sata registers PP2C and PP3C are used to control the configuration of the PHY control OOB timing for the COMINIT/COMWAKE parameters respectively. Calculate those parameters from port clock frequency. Overwrite those registers with calculated values to get better OOB timing. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-13armv8: ls1043a/ls2080a: check SoC by device IDWenbin song
Check LS1043A/LS2080a by device ID without using personality ID to determine revision number. This check applies to all various personalities of the same SoC family. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27armv8: layerscape: Allocate 66 MB DDR for secure memorySumit Garg
Change DDR allocated for secure memory from 2 MB to 66 MB. This additional 64 MB secure memory is required for trusted OS running in Trusted Execution Environment using ARMv8 TrustZone. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-22armv8: fsl: ifc: Put IFC related code under CONFIG_FSL_IFCSriram Dash
IFC code is put under CONFIG_FSL_IFC Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: ls1088a: fix the MMU table for pcie config spaceHou Zhiqiang
The pcie config space of ls1088a is different from ls2080a. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-009007Ran Wang
Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.bhagat@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-008997Ran Wang
Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter settings Change config of transmitter signal swings by setting register PCSTXSWINGFULL to 0x47 to pass compliance tests. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-009798Ran Wang
The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-009008Ran Wang
USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature Optimal eye at TXREFTUNE value to 0x9 is observed, change set the same value. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()Ran Wang
Some erratum patch might need it to program registers. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: fsl-layerscape: Support to add RGMII for ls1088aqdsAshish Kumar
This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: ls1088a: Add NXP LS1088A SoC supportAshish Kumar
LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: fsl-layerscape: Fix final MMU table for QSPI and IFCSuresh Gupta
For QSPI and IFC addresses execution shouldn't be allowed when u-boot running from DDR. Revise the MMU final table to enforce execute-never bits. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11fsl-layerscape: Consolidate registers space defination for CCI-400 busAshish Kumar
CoreLink Cache Coherent Interconnect (CCI) provides full cache coherency between two clusters of multi-core CPUs and I/O coherency for devices and I/O masters. This patch add new config option SYS_FSL_HAS_CCI400 and moves existing register space definaton of CCI-400 bus to fsl_immap to be shared. CONFIG_SYS_CCI400_ADDR is replaced with SYS_CCI400_OFFSET in Kconfig. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [YS: revised commit message, squashed patches for armv8 and armv7] Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-09config: ls1012aqds: Enable USB EHCI support for ls1012aqdsRajesh Bhagat
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> [YS: Revise subject, remove commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-01soc/fsl-layerscape: Update SVR number for LS2081A and LS2041ASantan Kumar
Update SVR as per the SOC document. -LS2081A: 0x870919 -> 0x870918 -LS2041A: 0x870915 -> 0x870914 Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-01armv8: Remove duplicate definition for IH_ARCH_ARM and IH_ARCH_ARM64Alison Wang
The duplicate definitions for IH_ARCH_ARM and IH_ARCH_ARM64 are removed. The definitions in <image.h> are used. According to this modification, the comparison between os arch and cpu arch is done in C programming instead of ASM programming. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-05common: arm: freescale: layerscape: Move header files out of common.hSimon Glass
We should not have an arch-specific header file in common.h. Adjust the board files a little so it is not needed, and drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05common: freescale: Move arch-specific declarationsSimon Glass
The declarations should not be in common.h. Move them to the arch-specific headers. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup thinko defined(FSL_LSCH3) -> defined(CONFIG_FSL_LSCH3)] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01armv8: layerscape: Enabling loading PPA during SPL stageYork Sun
Loading PPA in SPL puts the rest of U-Boot (including RAM version loaded later) in EL2 with MMU and cache enabled. Once PPA is loaded, PSCI is available. Signed-off-by: York Sun <york.sun@nxp.com>
2017-05-23armv8: fsl-layerscape: Add NXP LS2081A, LS2041A SoC supportPriyanka Jain
The QorIQ LS2081A SoC has eight 64-bit ARM v8 Cortex A72 cores and is built on layerscape architecture. It is 40-pin derivative of LS2084A (non-AIOP personality of LS2088A). So feature-wise it is same as LS2084A. LS2041A is a 4-core personality of LS2081A. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-23board: freescale: ls2080ardb: Enable SD interface for RevF boardPriyanka Jain
LS2080ARDB/LS2088ARDB RevF board has smart voltage translator which needs to be programmed to enable high speed SD interface by setting GPIO4_10 output to zero. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-24arm: psci: make psci usable on single core socsYuantian Tang
PSCI can be used on both multiple and single core socs. Current implementation only allows PSCI to work on multiple core socs. This patch removes this restriction so that PSCI can work on single core socs as well. Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls1043a: Drop macro CONFIG_LS1043AYork Sun
Use CONFIG_ARCH_LS1043A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls2080a: Drop macro CONFIG_LS2080AYork Sun
Use CONFIG_ARCH_LS2080A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: SECURE_BOOT: Enable chain of trust on LS1012A platformVinitha Pillai-B57223
Define bootscript and its header addresses for QSPI target Also add PPA header address in Kconfig Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-27 08:28:15 +0000