summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-mx31
AgeCommit message (Collapse)Author
2012-10-15mx31: Fix PDR0_CSI_PODFBenoît Thébaudeau
The CSI PODF bit-field used by the previous code for the i.MX31 CCM PDR0 register is actually composed of two bit-fields: one pre-divider and one post-divider. This patch fixes the CCM access macros and the code using them accordingly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
2012-10-15mx31: Add more CCM access macrosBenoît Thébaudeau
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
2012-10-15imx: Use MXC_I2C_CLK in imx i2c driverMatthias Weisser
i2c didn't work on imx25 due to missing MXC_IPG_PERCLK. Now using MXC_I2C_CLK on all imx systems using i2c. Signed-off-by: Matthias Weisser <weisserm@arcor.de> Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-06mx31: Define default SoC input clock frequenciesBenoît Thébaudeau
Define default SoC input clock frequencies for i.MX31 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Helmut Raiger <helmut.raiger@hale.at>
2012-09-01mxc: Define architecture identifierBenoît Thébaudeau
Define ARCH_MXC for i.MX devices. This is useful to identify features or behaviors common to all i.MX SoCs. The i.MX28 is omitted because its architecture is a bit different (like imx/mxc vs. mxs in Linux). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Andy Fleming <afleming@gmail.com> Cc: Kim Phillips <kim.phillips@freescale.com>
2012-09-01MX: Set a common gpio.h for all i.MXStefano Babic
Each i.MX has its own gpio.h, defining the same structure. The internal GPIO controller has the same layout (at least for the register used by u-boot) and can be shared. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Matt Sealey <matt@genesi-usa.com>
2012-09-01mx3: Fix typo on IPU_CONF_CSI_ENBenoît Thébaudeau
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2012-07-11mxc_i2c: specify i2c base address in config fileTroy Kisky
The following platforms had their config files changed flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd and mx53loco. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2012-02-27tt01: add video supportHelmut Raiger
The video setup for the Epson display is provided. Addtionally some extra info is displayed next to the Linux logo. Make get_cpu_rev() publicly available (added to sys_proto.h). Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
2012-02-27mxc_spi: move machine specifics into CPU headersEric Nelson
Move (E)CSPI register declarations into the imx-regs.h files for each supported CPU Introduce two new macros to control conditional setup MXC_CSPI - Used for processors with the Configurable Serial Peripheral Interface (MX3x) MXC_ECSPI - For processors with Enhanced Configurable... (MX5x, MX6x) Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Jason Liu <jason.hui@linaro.org> Tested-by: Jason Liu <jason.hui@linaro.org>
2012-02-12mmc: access mxcmmc from mx31 boardsHelmut Raiger
This patch modifies mxcmmc.c to be used not only by i.MX27 but also by i.MX31 boards. Both use the same SD controller, but have different clock set-ups. The i.MX27 imx_get_XXXclock functions are made static to generic.c and a public mxc_get_clock() function is provided. Pins, base address and prototypes for an i.MX31 specific board_init_mmc() are provided. Some of the i.MX27 clock getters are unused and marked as such to avoid warnings (./MAKEALL -s mx27), but the code was left in for future use. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-12-06MX: serial_mxc: cleanup removing nasty #ifdefStefano Babic
The serial driver for iMX SOCs is continuosly changed if a new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port> defines were used only to find the base address for the selected UART. Instead of that, move the base address to the board configuration file and drop all #ifdef from driver. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Wolfgang Denk <wd@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Helmut Raiger <helmut.raiger@hale.at> CC: John Rigby <jcrigby@gmail.com> CC: Matthias Weisser <weisserm@arcor.de> CC: Jason Liu <jason.hui@linaro.org> Acked-by: Jason Liu <jason.hui@linaro.org>
2011-11-11mx31: Use proper IO accessor for GPR registerFabio Estevam
Use proper IO accessor for GPR register. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-03mx31: add ESD control registersHelmut Raiger
This allows to initialize DDR memory in C code. Currently all mx31 boards use assembler code (lowlevel_init.S) Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-03mx31: define pins and init for UART2 and CSPI3Helmut Raiger
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-03mx31: Introduce mx31_set_gpr functionFabio Estevam
Introduce mx31_set_gpr function for setting the GPR (General Purpose Register) on MX31. This function can be useful for setting a group of pins into tied to some specific peripherals. Reuse this function from the linux kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-10-27mx31: provide readable WEIM CS accessorHelmut Raiger
setup_weimcs() and some macros are added to support the setup for i.MX31 WEIM chip selects. As a compromise between verbosity and readability an ASCII-art'ish bit comment is used instead of bitfields. All i.MX31 boards have been patched to use this approach using a helper program to verify the changes. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
2011-10-13mx31: make HSP clock for mx3fb driver availableHelmut Raiger
This additionally updates mx31/generic.c by - replacing __REG() macro accesses with readl() and writel() - providing macros for PDR0 and PLL bit accesses Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-30MX31: Disable watchdog during low-power modesFabio Estevam
Turn on the watchdog WDZST bit so that watchdog timer does not count during low power modes. Prior to applying this patch mx31pdk board got watchdog resets because when it booted in the Linux prompt and there was no activity, the system entered into idle mode while watchdog timer was still active. Fix this by disabling watchdog timer during idle mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-09-07MX31: fix missing mxc_get_clk() callStefano Babic
Add missing case to be used in common MXC code. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-04MX31: make use of GPIO framework for MX31 processorStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-09-03MX31: removed warnings due to clock.hStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-07-18MX31: Cleanup clock functionStefano Babic
The patch provide the same API used with other i.MX processors and get rid of mx31_ functions. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-07-14imx: Add support for USB EHCI on imx25Matthias Weisser
Adding support for USB host on imx25 using the internal PHY. Changing the name of base address define for imx31 to get some unification. Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-05-23MX31: drop warnings due to missing prototype for mxc_watchdog_reset()Stefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-05-11MX31: change return value of get_cpu_revStefano Babic
Drop warnings in get_cpu_rev and changes the return value (a u32 instead of char * is returned) of the function to be coherent with other processors. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Detlev Zundel <dzu@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-05-11MX31: removed warning due to missing prototypeStefano Babic
Drop warning caused by missing prototype for mxc_hw_watchdog_reset(). Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27MX31: drop warnings in get_cpu_revStefano Babic
Drop warnings due to recent commit ARM: mx31: Print the silicon version Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2011-04-27ARM: MX31: Fix file name labelFabio Estevam
Commit 5d2c154 (IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers) renamed mx31-imx-regs.h to imx-regs.h. Change the file label accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-04-27ARM: mx31: Print the silicon versionFabio Estevam
Use the same method of the Linux kernel to print the MX31 silicon version on boot. Tested on a MX31PDK with a 2.0 silicon, where it shows: CPU: Freescale i.MX31 rev 2.0 at 531 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-04-27IMX: MX31: Cleanup include files and drop nasty #ifdef in driversStefano Babic
As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-04-27MX31: add support for MX31 watchdogStefano Babic
The patch add CONFIG_HW_WATCHDOG to be used with the internal watchdog timer of the MX31 processor. Two function are exported for the board maintainers: mxc_hw_watchdog_enable mxc_hw_watchdog_reset The board maintainer can decide to use mxc_hw_watchdog_reset as hw_watchdog_reset, or to implement his own function to reset the watchdog. The watchdog timer can be configured with CONFIG_SYS_WD_TIMER_SECS (value in seconds). The MX31 allows values between 0.5 (CONFIG_SYS_WD_TIMER_SECS = 0) and 128 seconds. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-02-02SPI: mxc_spi: replace fixed offsets with structuresStefano Babic
This patch cleans driver code replacing all accesses to registers with fixed offsets with a corresponding structure. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-20MX31: Removed warnings for iomux functionStefano Babic
Removed warnings generated in the mx31_set_pad() function. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13MX31: add support for setting pin padsStefano Babic
The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13MX31: Adding missing iomux pin to MX.31 registersStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-09-29Use common function to set GPIOs for MX3 and MX5Stefano Babic
The patch adds support for setting gpios to the MX51 processor and change name to the corresponding functions for MX31. In this way, it is possible to get rid of nasty #ifdef switches related to the processor type. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX31: Support 128MB RAM on QONG moduleStefano Babic
The QONG module can be downsized and delivered with 128MB instead of 256MB. The patch adds run time support for the two different memory configurations. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX31: add pin definitions for NAND controllerStefano Babic
Add pin definitions ralted to the NAND controller to be used to set up the pin multiplexer. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX31: add accessor function to get a gpioStefano Babic
The patch adds an accessor function to get the value of a gpio. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-13Move architecture-specific includes to arch/$ARCH/include/asmPeter Tyser
This helps to clean up the include/ directory so that it only contains non-architecture-specific headers and also matches Linux's directory layout which many U-Boot developers are already familiar with. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
generated by cgit (git 2.34.1) at 2024-12-27 05:40:04 +0000