uboot-2021-rebase.git - uboot 2021 rebase, to fix booting on modern SD cards, from https://github.com/fifteenhex/u-boot/tree/am335x_som

Age	Commit message (Expand)	Author
2013-03-07	mx6: Provide a structure for accessing HDMI registers	Fabio Estevam
2013-03-07	i.MX6: Add DDR controller registers	Eric Nelson
2013-03-07	i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO	Eric Nelson
2013-03-07	i.MX6: crm_regs: define IOMUXC_GPR4/6/7	Eric Nelson
2013-03-07	i.MX6: crm_regs: define CCM_CCGRx for use in board config files	Eric Nelson
2013-03-07	i.MX6: consolidate pad names for multi-CPU boards	Eric Nelson
2013-02-12	mx6: Disable Power Down Bit of watchdog	Fabio Estevam
2012-11-10	arch-mx6: add mx6dl_pins.h	Troy Kisky
2012-11-10	imx-common: cpu: add imx_ddr_size	Troy Kisky
2012-11-10	mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite	Troy Kisky
2012-10-16	i.MX6: add HDMI transmitter register declarations from kernel WIP.	Eric Nelson
2012-10-16	i.MX6: set drive strength for parallel RGB pads	Eric Nelson
2012-10-16	mx6qsabreauto: Pass the board revision to the kernel	Fabio Estevam
2012-10-15	mx5/6: Define default SoC input clock frequencies	Benoît Thébaudeau
2012-10-15	imx: Use MXC_I2C_CLK in imx i2c driver	Matthias Weisser
2012-10-15	i.MX6: get rid of redundant struct src_regs (dupe of struct src)	Eric Nelson
2012-10-15	i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields	Eric Nelson
2012-10-15	i.MX6: Add ANATOP_PFD_480 bitfield constants	Eric Nelson
2012-10-15	i.MX6: define IOMUX_GPR3 register bitfields	Eric Nelson
2012-10-15	i.MX6: define bitfields for CHSCCDR register	Eric Nelson
2012-10-15	i.MX6: change register name for CCM_CHSCCDR to match ref. manual	Eric Nelson
2012-10-15	i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields	Eric Nelson
2012-09-17	MX6: drop binary constants from iomux header	Stefano Babic
2012-09-01	mxc: Define architecture identifier	Benoît Thébaudeau
2012-09-01	MX: Set a common gpio.h for all i.MX	Stefano Babic
2012-09-01	imx-common/cmd_bmode.c: add imx bmode (bootmode) command	Troy Kisky
2012-09-01	iomux: move IOMUX_GPR13_xxx defines	Troy Kisky
2012-07-31	imx-common: add i2c.c for bus recovery support	Troy Kisky
2012-07-31	i.mx: iomux-v3.h: move to imx-common include directory	Troy Kisky
2012-07-20	mx6: Make pad name macro consistent with the datasheet	Ashok
2012-07-10	mx6: Allow mx6 to access the IPUv3 registers	Fabio Estevam
2012-07-07	i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly	Jason Liu
2012-05-15	i.MX6: add enable_sata_clock()	Eric Nelson
2012-05-15	i.MX6: Add ANATOP regulator init	Dirk Behme
2012-05-15	imx-common: Factor out get_ahb_clk()	Fabio Estevam
2012-04-16	imx: Remove unneeded/repititive definitions from imx headers	Vikram Narayanan
2012-04-16	i.MX6: define CACHELINE_SIZE	Eric Nelson
2012-03-27	mx6: Read silicon revision from register	Fabio Estevam
2012-03-27	mx6: Remove duplicate definition of ANATOP_BASE_ADDR	Fabio Estevam
2012-03-26	usb/ehci: Add USB support for the MX6Q	Wolfgang Grandegger
2012-02-27	net: fec_mxc: add 1000 Mbps selection	Troy Kisky
2012-02-27	mx6q: Add support for ECSPI through mxc_spi driver	Eric Nelson
2012-02-27	mx6q: define GPIO macros for translating between ordinals and port:index	Eric Nelson
2012-02-12	i.mx6: mx6x_pins: Fix uart txd definitions	Troy Kisky
2012-01-16	imx: mx6q: add aipstz init for off platform periph	Jason Liu
2012-01-16	i.mx6:imx6q: allign MAC address with burned-in ordering	Jason Liu
2012-01-16	net: imx: Add multi-FEC support for imx_get_mac_from_fuse	Fabio Estevam
2011-12-09	i.mx: add the initial support for freescale i.MX6Q processor	Jason Liu