summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/arch-rockchip
AgeCommit message (Collapse)Author
2019-05-08rockchip: boot0: update CONFIG_ROCKCHIP_SPL_RESERVE_IRAM for SPL onlyKever Yang
The CONFIG_ROCKCHIP_SPL_RESERVE_IRAM is for SPL only, add condition to limit it not affect TPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01rockchip: arm: remove no use macroKever Yang
TIMER7_BASE is no used by source code now, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: Add support for chromebook_bobSimon Glass
Bob is a 10-inch chromebook produced by Asus. It has two USB 3.0 type-C ports, 4GB of SDRAM, WiFi and a 1280x800 display. It uses its USB ports for both power and external display. It includes a Chrome OS EC (Cortex-M3) to provide access to the keyboard and battery functions. Support so far includes only: - UART - SDRAM - MMC, SD card - Cros EC (but not keyboard) Not included: - Keyboard - Display - Sound - USB - TPM Bob is quite similar to Kevin, the Samsung Chromebook Plus, but support for this is not provided in this series. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: Implement spl_gpio in the GPIO driverSimon Glass
Allow rockchip boards to use GPIOs before driver model is ready. This is really only useful for setting GPIOs to enable the early debug console, if needed on some platforms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: Move pull-up/down enum into a common fileSimon Glass
At present this enum is only available to rk3288. Move it so that other rockchip SoCs can access it. It is needed for the SPL GPIO driver for rk3999 in a later patch. Also adjust the enum name to lower case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-02-01rockchip: rk3288: Add i2s pinctrl and clock supportSimon Glass
Add support for setting pinctrl and clock for I2S on rk3288. This allows the sound driver to operate. These settings were created by rkmux.py Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30rockchip: rk3399: Initialize CPU B clock.Christoph Muellner
This patch sets the PLL of CPU cluster B (BPLL) to 600 MHz. This decreases the boot time of Linux 4.19 by about 8%. The 600 MHz are inspired by the 600 MHz used for LPLL initialization (came in with commit 9f636a249c1). Tested on RK3399-Q7 on Haikou base board. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30ARM: rockchip: rv1108: Sync clock with vendor treeOtavio Salvador
Make adjustments to the rv1108 clock driver in order to align it with the internal Rockchip version. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-30rockchip: rk3188: add support for usb-uart functionalityHeiko Stuebner
Rockchip socs can route the debug uart pins through the d+ and d- pins of one specific usbphy per soc. Add a config option and implement the setting on the rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Fixed up to mark grf as maybe unused:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-08-08usb: rockchip: implement K_FW_LBA_ERASE_10 commandAlberto Panizzo
This command is part of the write partition sequence performed by rkdeveloptool: one partition is first completely erased and than wrote. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-08usb: rockchip: implement K_FW_LBA_READ_10 commandAlberto Panizzo
This patch implement reading blocks form selected device with LBA addressing. Corresponding command on workstation is: rkdeveloptool rl <start_blk> <blk_cnt> <file> While we support reading more than one blocks per K_FW_LBA_READ_10 request, rkdeveloptool and original rockchip tool do perform chunk reads limiting the maximum size per chunk far lower than max int values. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driverAlexander Kochetkov
Clean the iomux definitions at grf_rk3188.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driverAlexander Kochetkov
Clean the iomux definitions at grf_rk3036.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3399: add support for I2C[123467]Philipp Tomsich
This adds support for the (to date unsupported) I2C controllers 1~4 and 6~7 (i.e. now all controllers except I2C5, which is not accessible on the RK3399-Q7, are supported by pinctrl). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28rockchip: pinctrl: rk3399: fix GPIO2B1 and GPIO2B2 shift valuePhilipp Tomsich
The shift values for GPIO2B1 and GPIO2B2 had in fact referred to GPIO2B0 and GPIO2B1, respectively. This substitutes the correct values. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28clk: rockchip: clk_rk3368: Implement "assign-clock-parent"David Wu
Implement the setting parent for gmac clock, and add internal pll div set for mac clk. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk322x.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. After that, define the uart2 iomux at rk322x-board file. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: Add rk3328 gmac pinctrl supportDavid Wu
Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2 and bit10 at com iomux register. After that, set rgmii m1 tx pins to 12ma drive-strength, and clean others to 2ma. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk3328.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driverDavid Wu
If we include both the rk3288_grf.h and rv1108_grf.h, it will cause the conflicts of redefinition. Clean the iomux definitions at grf_rv1108.h, and move them into pinctrl-driver. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: grf_rv1108.h: Fix the grf offsetsDavid Wu
The last 4 grf registers offset of rv1108 are wrong, fix them for correct usage. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-11Merge git://git.denx.de/u-boot-usbTom Rini
2018-01-10usb: rockchip: add the rockusb gadgetEddie Cai
this patch implement rockusb protocol on the device side. this is based on USB download gadget infrastructure. the rockusb function implements the rd, wl, rid commands. it can work with rkdeveloptool Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-09rockchip: clk: bind reset driverElaine Zhang
Bind rockchip reset to clock-controller with rockchip_reset_bind(). Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-18rockchip: update boot0 hookKever Yang
Rockchip SoCs only need boot0 hook at SPL, and the U-Boot proper do not need it. The very beginning of U-Boot proper is different between armv7 and armv8: armv7 start with ARM_VECTORS while armv8 start with 'b reset'. Here is the map of very beginning for all cases: armv7 SPL: TAG(overwrite 'b 1f')+'b reset' + ARM_VECTORS armv7 U-Boot: ARM_VECTORS armv8 SPL: TAG(overwrite 'b 1f')+'b reset' + Reserved_iram(rk3399) armv8 U-Boot: 'b reset' Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-02rockchip: clk: rk3128: fix DCLK_VOP_DIV_CON_MASKPhilipp Tomsich
The DCLK_VOP_DIV_CON_MASK should cover only bits 8 through 15. Fix this to remove an "integer-overflow on shifted constant" warning. Fixes: 9246d9e ("rockchip: rk3128: add clock driver") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-02rockchip: clk: rk3128: fix NANDC_PLL_SEL_MASKPhilipp Tomsich
The PLL selector field for NANDC is only 2 bits wide. This fixes an 'int-overflow on shift' warning. Fixes: 9246d9e ("rockchip: rk3128: add clock driver") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add pinctrl driverKever Yang
Add rk3128 pinctrl driver and grf/iomux structure definition. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add clock driverKever Yang
Add rk3128 clock driver and cru structure definition. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26rockchip: pinctrl: rk3399: add support for I2C8Philipp Tomsich
The RK3399 has a total of 9 I2C controllers. To support these, the enum in periph.h is extended and the mapping from the IRQ numbers to the peripheral-ids is extended to ensure that pinctrl requests are passed through to the function configuring the I2C pins. For I2C8, the pinctrl is implemented and tested (on a RK3399-Q7) using communication with the FAN53555 connected on I2C8. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-21rockchip: add support for enter to bootrom download modeAndy Yan
Rockchip bootrom will enter download mode if it returns from spl/tpl with a non-zero value and couldn't find a valid image in the backup partition. This patch provide a method to instruct the system to back to bootrom download mode by checking the BROM_DOWNLOAD_FLAG register. As the bootrom download function relys on some modules such as interrupts, so we need to back to bootrom as early as possbile before the tpl/spl code override the interrupt configurations. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: make boot_mode related codes reused across all platformsAndy Yan
setup_boot_mode function use the same logic but different mode register address across all the rockchip platforms, so it's better to make this function reused across all the platforms, and let the mode register address setting from the config file. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: sysreset: merge into one common driverKever Yang
Use a common driver for all Rockchip SOC instead of one for each SoC. Use driver_data for reg offset. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: back-to-bootrom: allow passing a cmd to the bootromPhilipp Tomsich
The BROM supports forcing it to enter download-mode, if an appropriate result/cmd-word is returned to it. There already is a series to support this in review, so this prepares the (newly C-version) of the back-to-bootrom code to accept a cmd to passed on to the BROM. All the existing call-sites are adjusted to match the changed function signature. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2017-11-21rockchip: back-to-bootrom: replace assembly-implementation with C-codePhilipp Tomsich
The back-to-bootrom implementation for Rockchip has always relied on the stack-pointer being valid on entry, so there was little reason to have this as an assembly implementation. This provides a new C-only implementation of save_boot_params and back_to_bootrom (relying on setjmp/longjmp) and removes the older assembly-only implementation. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2017-11-21rockchip: boot0 hook: support early return for RK3188/RK3066-style BROMPhilipp Tomsich
Some Rockchip BROM versions (e.g. the RK3188 and RK3066) first read 1KB data from NAND into SRAM and executes it. Then, following a return to bootrom, the BROM loads additional code to SRAM (not overwriting the first block read) and reenters at the same address as the first time. To support booting either a TPL (on the RK3066) or SPL (on the RK3188) using this model of having to count entries, this commit adds code to the boot0 hook to track the number of entries and handle them accordingly. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2017-11-21rockchip: boot0: align to 0x20 for armv7 '_start'Kever Yang
The '_start' is using as vector table base address, and will write to VBAR register, so it needs to be aligned to 0x20 for armv7. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [Updated to current code base:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21arm: boot0 hook: move boot0 hook before '_start'Philipp Tomsich
The boot0 hook on ARM does not insert its payload before the vector table. This is both a mismatch with thec comment above it and contradict usage of the boot0 hook on ARM64. To fix this (and unify the semantics for ARM and ARM64), we change the boot0-hook semantics on ARM to match those on ARM64: (1) if a boot0-hook is present it is inserted at the start of the image (2) if a boot0-hook is present, emitting the ARM vector table (and the _start) symbol are suppressed in vectors.S and the boot0-hook has full control over where and when it wants to emit these Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: bootrom: add definitions to retrieve BROM boot-sourcePhilipp Tomsich
The Rockchip BROM allows reading where it booted from from SRAM. This adds the necessary definitions (as received from Kever) for the location of this information in the RK3399's SRAM and naming for the constants used. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01armv7: rk3288: Move configure_l2ctlr to commonJagan Teki
configure_l2ctlr will be shared between SPL and TPL so move them into asm/arch/sys_proto.h Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3036: fix grf macro defineKever Yang
Some of macros definition are not correct, fix them according to TRM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk322x: add sdram driverKever Yang
Add driver for rk322x to support sdram initialize in SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rk3368 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rv1108 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 10-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-18rockchip: rk322x: Disable integrated macphy for saving power consumingDavid Wu
Unfortunately, the integrated macphy default is enabled, which will increase power consuming, if we do not use this PHY. So let's disable it at first, which will save power consuming. If we really use it, then enable it in driver level. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-05rockchip: rk3288: Add reset reason detectionWadim Egorov
Sometimes it's helpful to know the reset reason caused in the SoC. Add reset reason detection for the RK3288 SoC. This will set an environment variable which represents the reset reason. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: rk322x: update MACRO for mmc clksel regKever Yang
The description for eMMC/SDIO/SDMMC src is not correct, update the CRU_CLKSEL11_CON value definition according to TRM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-13rockchip: rk3288: fix EMMC_DIV_MASK definition in headerKever Yang
It should be '<<' instead of '<' for _MASK definition, fix it. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-20 23:31:23 +0000