summaryrefslogtreecommitdiff
path: root/arch/arm/include/asm
AgeCommit message (Collapse)Author
2020-06-03Merge tag 'efi-2020-07-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc4 This patch series addresses the following issues: * allow compiling with clang * add missing function descriptions to the HTML documentation * simplify the validation of UEFI images * validate load options in the UEFI boot manager In a preparatory patch a structure definition is moved.
2020-06-03efi_loader: allow compiling with clangHeinrich Schuchardt
On ARM systems gd is stored in register r9 or x18. When compiling with clang gd is defined as a macro calling function gd_ptr(). So we can not make assignments to gd. In the UEFI sub-system we need to save gd when leaving to UEFI binaries and have to restore gd when reentering U-Boot. Define a new function set_gd() for setting gd and use it in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-02ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCIMasahiro Yamada
arch/arm/include/asm/system.h declares psci_arch_init(), but it is surrounded by #ifdef CONFIG_ARMV8_PSCI. psci_arch_init() is called for CONFIG_ARMV7_PSCI too. Add the missing function declaration. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22usb: ehci-omap: Add Support for DM_USB and OF_CONTROLAdam Ford
The omap3.dtsi file shows the usbhshost node with two sub-nodes for ohci and ehci. This patch file creates the usbhshost, and pulls the portX-mode information. It then locates the EHCI sub-node, and initializes the EHCI controller with the info pulled from the usbhshost node. There is still more to do since there isn't an actual link between the 'phys' reference and the corresponding phy driver, and there is no nop-xceiv driver yet. In the meantime, the older style reference to CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull the phy out of reset until the phy driver is completed and the phandle reference is made. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds - QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based platforms - Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-19treewide: Remove unused FSL QSPI config options for Layerscape platformsKuldeep Singh
Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. Also consolidating defines in common headers. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Use __ASSEMBLY__ as the assembly macrosSimon Glass
Some places use __ASSEMBLER__ instead which does not work since the Makefile does not define it. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18arm: Don't include common.h in header filesSimon Glass
It is bad practice to include common.h in other header files since it can bring in any number of superfluous definitions. It implies that some C files don't include it and thus may be missing CONFIG options that are set up by that file. The C files should include these themselves. Update some header files in arch/arm to drop this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10imx: imx8qm/qxp: check whether m4 partition bootedPeng Fan
Add code to check m4 partition booted or not, we will use this to runtime set device tree file that passed to Linux Kernel. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-bootPeng Fan
Make sure that all devices that are powered up by SPL are powered down before entering into the u-boot. Otherwise the subsystem/device will never be powered down by SCFW, due to SPL and u-boot are in different partitions. Benefiting from power domain driver, this patch implements the function "imx8_power_off_pd_devices" to power off all active devices. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10cmd: nandbcb: Reconstruct the nandbcb tool for all platformsHan Xu
The original nandbcb tool was designed for imx6 only, when trying to leverage it to replace the kobs-ng tool, we found the design is not friendly for supporting all platforms. To support all iMX6/7/8 platforms and for easy further maintain, I reconstruct the structure of the tool. The main changes including: 1. Use platform_data to determine the logic branches rather than simply use SOC name. 2. More data structures as parameter for functions. 3. Global variables to define the FCB/DBBT/FW locations. 4. Implement the kobs-ng default 4 FCB/4 DBBT/2 FW layout. 5. Support Hamming coding/ 40bit BCH/ 62bit BCH coding FCB. 6. Dump and compare all written FCB/DBBT to verify data integrity. The tool has been verified on iMX6Q/DL, 6SX, 7D, 6ULL, iMX8QX, iMX8MM. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx8: power: Add PD device lookup interface to power domain uclassPeng Fan
Add power_domain_lookup_name interface to power domain uclass to find a power domain device by its DTB node name, not using its associated client device. Through this interface, we can operate the power domain devices directly. This is needed for non-DM drivers. Modified from Ye's NXP downstream patch only for legacy imx8 power domain driver, since we have not migrated to use new power domain driver. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10mtd: nand: support GPMI NAND driver for i.MX8Peng Fan
enable the GPMI NAND driver for i.MX8, i.MX8 use similar controller as i.MX8M - register definition for i.mx8 - DMA structure must be 32bit address Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10mtd: mxs_nand: fix the gf_13/14 definition issueHan Xu
gf_13/14 mask was not set correctly in register definition. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10mxs_nand: Add support for i.MX8MYe Li
Update the gpmi/apbh_dma/bch drivers and relevant registers for i.MX8M. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10nand: mxs: correct bitflip for erased NAND pagePeng Fan
This patch is a porting of http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/ commit/?h=imx_4.1.15_1.0.0_ga&id=e4dacc44d22e9474ec456cb330df525cd805ea38 " i.MX6QP and i.MX7D BCH module integrated a new feature to detect the bitflip number for erased NAND page. So for these two platform, set the erase threshold to gf/2 and if bitflip detected, GPMI driver will correct the data to all 0xFF. Also updated the imx6qp dts file to ditinguish the GPMI module for i.MX6Q with the one for i.MX6QP. " In this patch, i.MX6UL is added and threshold changed to use ecc_strength. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: regs: add more fuse bank structurePeng Fan
Add more fuse bank structure for use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10fec: Move imx_get_mac_from_fuse declare to imx fileYe Li
imx_get_mac_from_fuse is used to load MAC address from fuse. On imx8mp, we have two different ENET controllers and both need to call this function. So decouple its declare from fec driver. Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10imx: add module fuse supportPeng Fan
There are different parts from one SoC. Take i.MX6ULL for example, some part might not have ENET, some might have; some might not have USB, some might have. The information could be got from OCOTP, to make one image support the different parts, we need runtime disable linux kernel dts node and uboot driver probe if the corresponding module not exists in the part. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
2020-05-04Merge tag 'u-boot-imx-20200502' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2020.07 ---------------- - imxrt: fix LCD clock, fix doc - new board: Coral Dev - imx8: enable Cache in SPL. SNVS, update SCFW API - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading - MX6ULL : is_imx6ull to include i.MX6ULZ - Net: add config to enable TXC delay Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-03cpu: imx8: show RevC instead of Rev? at boot logFrank Li
Add REVC informaiton. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01arm: caches: add DCACHE_DEFAULT_OPTIONPatrick Delaunay
Add the new flags DCACHE_DEFAULT_OPTION to define the default option to use according the compilation flags CONFIG_SYS_ARM_CACHE_*. This new compilation flag allows to simplify dram_bank_mmu_setup() and can be used as third parameter (option=dcache option to select) of mmu_set_region_dcache_behaviour function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01configs: migrate CONFIG_SYS_ARM_CACHE_* in KconfigPatrick Delaunay
Move CONFIG_SYS_ARM_CACHE_WRITETHROUGH and CONFIG_SYS_ARM_CACHE_WRITEALLOC into Kconfig done by moveconfig.py. Kconfig uses a choice between the 3 values supported in U-Boot, including the new configuration CONFIG_SYS_ARM_CACHE_WRITEBACK (the default configuration). The patch also avoids to select simultaneously 2 configurations. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-01imx8: Configure SNVSFranck LENORMAND
Add a module to configure the tamper and secure violation of the SNVS using the SCU API. The module also adds some commands: - snvs_cfg: Configure the SNVS HP and LP registers - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP) - tamper_pin_cfg: Change the configuration of the tamper pins - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear status bits Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8: Update SCFW API to version 1.5Ye Li
Sync the latest SCFW API with below commit 6dcd0242ae7a53ac ("SCF-105: Revert accidental change") to add interfaces for PM resource reset and read/write SNVS security violation and tamper DGO registers. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8: scu api: Add support for SECO manufacturing protection APIsBreno Lima
SECO provides APIs to support CAAM manufacturing protection: - sc_seco_get_mp_key() - sc_seco_get_mp_sign() - sc_seco_update_mpmr() Add SCFW APIs support. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8mm: clock: fix fracpll decode issueYe Li
The fracpll decoding is using the bit definitions for int pll. Most of them are same, but the CLKE bit is different. Fix the wrong CLKE_MASK for fracpll and correct all bit definitions in fracpll decoding. Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8mq: Set ARM core clock directly from ARM PLLPeng Fan
For ARM core clock, there are two input branches, and can select via mux: one from ARM PLL directly, second from CCM A53 clock root. Currently we are using second branch. But IC confirmed the CCM A53 root signoff timing is 1Ghz, so we should switch to input from ARM PLL directly. This patch fixes the CORE SEL slice configuration and switch ARM clock to ARM PLL. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx8m: update clock root and fix core_selPeng Fan
Update clock root table to let it be easy to configure clock at very early stage. Also the core_sel mux parent should be A53 CLK root and ARM PLL. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx: update is_imx6ull to include i.MX6ULZPeng Fan
Update is_imx6ull helper to include i.MX6ULZ SoC. i.MX6ULZ could share same macro, then we no need to add is_imx6ulz in various drivers. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx: imx8m: add i.MX8MN variants supportPeng Fan
Add i.MX8MN variants support Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx: imx8m: add i.MX8MQ Dual and QuadLite supportPeng Fan
Add i.MX8MQ Dual and QuadLite variants. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01imx: fix cpu_type helperPeng Fan
i.MX8MP use 0x182 as its ID, so 0xff is not valid to get the cpu type, extend it to 0x1ff. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb, ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb. - Add GICv3 support for ls1028a, ls2088a, ls1088a. - Add lpuart support on ls1028aqds. - Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based platforms.
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28fsl-layerscape: Move GIC RD tables init to soc.cHou Zhiqiang
Move GIC redistributor tables initialization to CPU setup function. This patch introduces a GIC redistributor tables init function, and moves the function of reserving memory for GIC redistributor tables to soc.c and adds a argument for the memory size to reserve, BTW rename the function so that it is more readable. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-24clk: actions: Add common clock driverAmit Singh Tomar
This patch converts S900 clock driver to something common that can be used for other SoCs, for instance S700(few of clk registers are same). Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24arm: asm/cache.c: Introduce arm_reserve_mmuOvidiu Panait
As a preparation for turning reserve_mmu into an arch-specific variant, introduce arm_reserve_mmu on ARM. It implements the default routine for reserving memory for MMU TLB and needs to be weakly defined in order to allow for machines to override it. Without this decoupling, after introducing arch_reserve_mmu, there would be two weak definitions for it, one in common/board_f.c and one in arch/arm/lib/cache.c. Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Backplane support and bug fixes
2020-04-20Merge tag 'u-boot-amlogic-20200420' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - enable DM_RNG on meson boards - fix SMBIOS info on Odroid-C2 - Fix video output on GXBB/GXL/GXM boards - add USB gadget support for GXL/GXM boards
2020-04-20phy: meson-gxl-usb: add set_mode call to force switch to peripheral modeNeil Armstrong
Add set_mode function in the Amlogic GXL PHYs that will be called by the arch code to switch PHYs from/to gadget mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20armv8: ls1028a: define esdhc_status_fixupYinbo Zhu
This patch is to define esdhc_status_fixup function for ls1028a to disable SDHC1/SDHC2 status in device tree node if not selected. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-18video: mxsfb: add support for i.MXRTGiulio Benetti
Add support for i.MXRT by adding CONFIG_IMXRT in register structure and adding .compatible = "fsl,imxrt-lcdif". Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-17arm: imx6: configure NoC on i.MX6DQPBernhard Messerklinger
The i.MX6DP and i.MX6QP incorporate NoC interconnect logic which needs to be configured in order to use external DDR memory. This patch enables the SPL to configure the necessary registers in accordance with the NXP engineering bulletin EB828. Co-developed-by: Filip Brozović <fbrozovic@gmail.com> Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2020-04-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegraTom Rini
- Add support for Jetson Nano, plus miscellaneous other fixes found during Nano bringup. - Add Igor's update_uboot wrapper patches.
generated by cgit (git 2.34.1) at 2025-01-01 04:44:14 +0000