summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/imx8/cpu.c
AgeCommit message (Collapse)Author
2019-10-08imx8: cpu: fix mac fuse word for i.MX8QMPeng Fan
i.MX8QM does not share same FUSE MAC word index, so update the word index for i.MX8QM. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8: move i.MX8 cpu desc code to drivers/cpu/imx8_cpu.cPeng Fan
Move cpu desc code to cpu driver directory and name it imx8_cpu.c No functional change. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8qm: power up SMMUPeng Fan
There is SMMU in i.MX8QM. To use SMMU in Linux, need power up it. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8: Probe the SCU driver by using uclass functionYe Li
Since SCU MU driver has been bound in dm_init, so we don't need to bind it again. Just replace by using uclass function to probe it. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-06-11imx8: cpu: get temperature when print cpu descPeng Fan
Read the temperature when print cpu inforation. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-06-11imx8qm: fix cpu frequency reportingMarcel Ziswiler
CPU frequency reporting failed with the following error message being printed: sc_pm_get_clock_rate: resource:507 clk:2: res:3 Could not read CPU frequency: -22 CPU: NXP i.MX8QM RevB A53 at 0 MHz Fix this by differentiating between the A35 as found on the i.MX 8QXP and the A53 as found on the i.MX 8QM SoCs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-05-18CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-25imx8: add cpu supportPeng Fan
Add cpu type and Kconfig entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-03-13imx8qxp: Fix the reported CPU frequencyFabio Estevam
Currently the CPU frequency is incorrectly reported: CPU: NXP i.MX8QXP RevB A35 at 147228 MHz Fix this problem by using a direct call to the SCU firmware to retrieve the Cortex A35 CPU frequency. With this change applied the CPU frequency is displayed correctly: CPU: NXP i.MX8QXP RevB A35 at 1200 MHz Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
2019-01-28imx8: cpu: restrict checking ROM passover info for revAPeng Fan
Passover info only for revA. move get_cpu_rev out of CONFIG_CPU to avoid build failure when using get_cpu_rev in SPL. Add a CONFIG_SPL_BUILD for passover usage, no need to execute it again in normal U-Boot stage. Also if still checking passover info in normal U-Boot stage, need to make the passover code executed after arch_cpu_init_dm. So to make it easy and clean, only execute the code for SPL stage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-09imx8: cpu: correct infoPeng Fan
The CPU banner printed is as following: CPU: CPU: Freescale i.MX8QXP RevB A35 at 147228 MHz 1. Drop the CPU: 2. Change vendor from Freescale to NXP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx8: cpu: add uclass based CPU driverAnatolij Gustschin
print_cpuinfo() in board init code requires uclass CPU driver, add it to be able to display CPU info when CONFIG_DISPLAY_CPUINFO option is enabled. CPU node in DT will have to include 'clocks' and 'u-boot,dm-pre-reloc' properties for generic print_cpuinfo() to work as expected. The driver outputs info for i.MX8QXP Rev A and Rev B CPUs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx8: cpu: add function for reading FEC MAC from fuseAnatolij Gustschin
FEC driver requires imx_get_mac_from_fuse(). Add it in preparation for ENETx support. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx8: add arch_cpu_init arch_cpu_init_dmPeng Fan
Add arch_cpu_init(_dm) mainly to open the channel between ACore and SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add mmu and dram related functionsPeng Fan
Add mmu memmap, some memory regions are reserved by M4, Arm Trusted Firmware, so need to get memreg using SCFW API and setup the memmap. Add dram_init, dram_init_banksize, get_effective_memsize functions, according to the memreg. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: implement mmc_get_env_devPeng Fan
Implement mmc_get_env_dev for i.MX8. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add boot device detectionPeng Fan
Add get_boot_device to detect boot device. Add print_bootinfo to print the boot device info. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add basic cpu supportPeng Fan
Add basic cpu support, including cpu revision, cpu type, cpu core detection. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit (git 2.34.1) at 2025-01-08 14:51:40 +0000