summaryrefslogtreecommitdiff
path: root/arch/arm/mach-rockchip/rk3399/rk3399.c
AgeCommit message (Collapse)Author
2019-05-01rockchip: rk3399: include gpio.hPhilipp Tomsich
After applying the series for debug_uart_init(), Travis-CI reports: arch/arm/mach-rockchip/rk3399/rk3399.c:90:2: error: implicit declaration of function 'spl_gpio_set_pull' [-Werror=implicit-function-declaration] spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL); ^~~~~~~~~~~~~~~~~ This is caused by a missing header-file include. Fix it. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01rockchip: rk3399: add board_debug_uart_init()Kever Yang
Use board_debug_uart_init() for UART iomux init instead of do it in board_init_f, and move the function to soc file so that we can find all the soc/board setting in soc file and use a common board file for all rockchip SoCs later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01rockchip: rk3399: use grf structure to access regKever Yang
Prefer to use structure to access register if we could. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-11rockchip: correct the bank0 ram sizeKever Yang
The bank0 ram size should be the DRAM size minus reserved size, the DRAM size may be 1GB, 2GB, 4GB, we can not hard code it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Added DECLARE_GLOBAL_DATA_PTR for RK3328, RK3368 and RK3399: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-05-10rockchip: rk3399: correct memory regionKever Yang
RK3399 device memory region is 0xf8000000~0xffffffff. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-04rockchip: arm64: rk3399: remove unconditional debug messagePhilipp Tomsich
An earlier upstream change contained an unconditional debug message which would show up as a message similar to the following in the U-Boot startup (after the ATF and before the U-Boot banner): time 159f019, 0 This commit removes this message (instead of making if conditional on being a debug-build), as it doesn't pertain to any initialisation done in this file. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-16rockchip: arm64: rk3399: add ddr controller driverKever Yang
RK3399 support DDR3, LPDDR3, DDR4 sdram, this patch is porting from coreboot, support 4GB lpddr3 in this version. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Added rockchip: tag: Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-30rk3399: disable the clock multiplier support when SoC initKever Yang
The Clock Multiplier in rk3399 EMMC programmable clock generator is broken, we can remove its support from SoC GRF register. Without this patch, rk3399 emmc driver is not work after below patch applied: 6dffdbc mmc: sdhci: Add the programmable clock mode support Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2016-07-25ARM64: rockchip: add support for rk3399 SoC based evbKever Yang
RK3399 is a SoC from Rockchip with dual-core Cortex-A72 and quad-core Cortex-A53 CPU. It supports two USB3.0 type-C ports and two USB2.0 EHCI ports. Other interfaces are very much like RK3288, the DRAM are 32bit width address and support address from 0 to 4GB-128MB range. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>