summaryrefslogtreecommitdiff
path: root/arch/arm/mach-rockchip
AgeCommit message (Collapse)Author
2019-12-27rockchip: add description for TPL_ROCKCHIP_COMMON_BOARDThomas Hebb
SPL_ROCKCHIP_COMMON_BOARD, an almost identical option, has a title but this one doesn't for some reason. Add a description to make the menu easier to read. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27rockchip: make_fit_atf: explicitly use python3Jack Mitchell
On a distribution with no python2 installed and no python->python3 symlink the script will fail to execute. Specify python3 explicitly as it's already a requirement to build u-boot. Signed-off-by: Jack Mitchell <ml@embed.me.uk> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-26rockchip: fit_spl_optee: get text and optee base from buildKever Yang
Instead of hardcode the base address, we can get them from the build output, eg. get the SYS_TEXT_BASE from .config and get optee base from DRAM_BASE. We can use this script for SoCs with DRAM base not from 0x60000000(rk3229 and many other 32bit Rockchip SoCs), eg. rk3288 DRAM base is 0. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06arm: rockchip: rk3308: Initialize the iomux configurationDavid Wu
When we want to use plus pinctrl feature, we need to enable them at spl. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: misc: protect serial# from getting overwrittenHeiko Stuebner
serial# is one of the vendor properties and thus protected from being overwritten if already set. If env_set is called anyway this result in some nasty warnings, so check for presence before trying that. In the same direction check for the presence of cpuid# and compare it to the actual hardware and emit a warning if they don't match. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: misc: don't fail if eth_addr already setHeiko Stuebner
rockchip_setup_macaddr() runs from an initcall, so returning an error code will make that initcall fail thus breaking the boot process. And if an ethernet address is already set this is definitly not a cause for that, so just return success in that case. Fixes: 04825384999f ("rockchip: rk3399: derive ethaddr from cpuid"); Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05rockchip: px30: Add support for using UART3 as debug UARTPaul Kocialkowski
Some generic PX30 SoMs found in the wild use UART3 as their debug output instead of UART2 (used for MMC) and UART5. Make it possible to use UART3 as early debug output, with the associated clock and pinmux configuration. Two sets of output pins are supported (M0/M1). Future users should also note that the pinmux default in the dts is to use the M1 pins while the Kconfig option takes M0 as a default. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
2019-12-05rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNELPaul Kocialkowski
UART3 also has two sets of pins that can be selected. Rename the config option to a common name, to allow it to be used for both UART2 and UART3. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-12-02common: Move some board functions out of common.hSimon Glass
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move board_get_usable_ram_top() out of common.hSimon Glass
Move this function into init.h which seems to be designed for this sort of thing. Also update the header to declare struct global_data so that it can be included without global_data.h being needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-23rockchip: Setup dwc3_device (for non-dm gadgets)Jagan Teki
Setup dwc3_device structure for non-dm gadgets, which is used in rk3399 platforms. dwc3_device would have basic regbase, dr_mode, high speed and 16-bit UTMI+ etc. Cc: Marek Vasut <marex@denx.de> Tested-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Fix to use CONFIG_USB_DWC3_GADGET instead of CONFIG_USB_DWC3) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-23rockchip: Convert to use FIT generator for opteeKever Yang
Use generator script so that we can use environment for TEE source. $TEE for tee.bin, and if file not exist, the script can report a warning, and meke the build success without a error. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: allow DRAM init in SPLThomas Hebb
The common SPL removed SoC-specific code for RK3399's SPL and in the process caused the previously-unconditional DRAM initialization in board_init_f() to only happen when compiling a configuration that does not support TPL, meaning DRAM never gets initialized if TPL is supported but disabled. Fix this by omitting the DRAM init in SPL only when we are configured to also build a TPL. This fixes custom configurations that have disabled TPL, and it should also unbreak the "ficus-rk3399", "rock960-rk3399", and "chromebook_bob" defconfigs, although since I don't have any of those devices I can't confirm they're broken now. Fixes: b7abef2ecbcc ("rockchip: rk3399: Migrate to use common spl board file") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: SPL: fix ordering of DRAM initThomas Hebb
The common SPL code reordered the DRAM initialization before rockchip_stimer_init(), which as far as I can tell causes the RK3399 to lock up completely. Fix this issue in the common code by putting the DRAM init back after timer init. I have only tested this on the RK3399, but it wouldn't make any sense for the timer init to require DRAM be set up on any system. Fixes: b7abef2ecbcc ("rockchip: rk3399: Migrate to use common spl board file") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3308: Add support for ROC-RK3308-CC boardAndy Yan
ROC-RK3308-CC is a rk3308 based board designed by Firelfy, with eMMC and 256MB DDR3 and RTL8188 Wifi on board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17board: rockchip: Add rk3308 evb supportAndy Yan
Add support for rk3308 evaluation board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17arm: rockchip: Add RK3308 SOC supportAndy Yan
RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: rk3399: split rockpro64 out of evb_rk3399Vasily Khoruzhick
rockpro64 needs to setup I/O domains in order for USB to work in u-boot. Since we currently don't have a driver to do that, split it into its own board file and initialize I/O domains here. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: Init driver otg_data for rk3288 usb phyKever Yang
RK3288 needs to init the otg_data in board level to make the phy driver work. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: usb: Migrate to use ofnodeKever Yang
Migrate to use ofnode_* instead of fdt_* so that we may able to use live dt for usb udc driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: add px30 architecture coreHeiko Stuebner
Add core architecture code to support the px30 soc. This includes a separate tpl board file due to very limited sram size as well as a non-dm sdram driver, as this also has to fit into the tiny sram. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: misc: read cpuid either from efuse or otpHeiko Stuebner
Newer Rockchip socs use a different ip block to handle one-time- programmable memory, so depending on what got enabled get the cpuid from either source. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3399: migrate to use common codeYouMin Chen
For there are some structures and functions are common for all rockchip SoCs, migrate to use the common code so that we can clean up reduandent codes. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rk3328: use common sdram driverYouMin Chen
RK3328 has a similar controller and phy with PX30, so we can use the common driver for it and remove the duplicate codes. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: sdram: update the sys_reg to sys_reg2Kever Yang
We are using sys_reg2 and sys_reg3 as ddr cap info, sync the variable name to what we real use to avoid confuse people. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17rockchip: sdram: extend to use sys_reg3 for capacity infoKever Yang
Since we have new DRAM type and to support different DRAM size in different CS, we need more bits, so introduce sys_reg3 to record the info. Note that the info in sys_reg3 is extension to sys_reg2 and the info in sys_reg2 is the same as before. We define the DRAM_INFO with sys_reg3 as VERSION2. All the ENC macro are moved to sdram_common.h since the sdram.c only need to do the info decode. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: rename sdram_common.c/h to sdram.cKever Yang
rename sdram_common.c in arch/arm/mach-rockchip to sdram.c; so that we can use the file name sdram_common.c in dram driver for better understand the code; clean the related file who has use the header file at the same time. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17ram: rockchip: rename sdram.h to sdram_rk3288.hKever Yang
The header file sdram.h is used for rk3288 and similar SoCs, rename it to make it more understandable. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10rockchip: firefly-rk3288: Enable TPL supportKever Yang
This patch enable TPL support for firefly-rk3288 board, which works ths same way with other RK3288 board like Tinker, evb. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10rockchip: adding the missing "/" in entries of boot_devicesLevin Du
Without the prefix, "same-as-spl" in `u-boot,spl-boot-order` will not work as expected. When board_boot_order() `spl-boot-order.c` meets "same-as-spl", it gets the conf by looking the boot_devices table by boot source, and parse the node by the conf with: node = fdt_path_offset(blob, conf); which will failed without the "/" indicating the path. Currently only entries of boot_devices in rk3399 have the "/" prefix. Therefore add the missing ones in other boards. Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10rockchip: rk3399: update SPL_STACK_R_ADDRKever Yang
Use the same SPL_STACK_R_ADDR in Kconfig instead of each board config; default to 0x4000000(64MB) instead of 0x80000(512KB) for this address can support all the SoCs including those may have only 64MB memory, and also reserve enough space for atf, kernel(in falcon mode) loading. After the ATF entry move to 0x40000, the stack from 0x80000 may be override when loading ATF bl31. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10rockchip: make_fit_atf.py: allow inclusion of a tee binaryHeiko Stuebner
A trusted execution environment should also get loaded as loadable from a fit image, so add the possibility to present a tee.elf to make_fit_atf.py that then gets included as additional loadable into the generated its. For ease of integration the additional loadable is created as atf_(x+1) after all others to re-use core generation loops. Tested against the combinations of 1-part-atf and multi-part-atf each time with and without a tee binary present. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-10-08spl: pass args to board_return_to_bootromPeng Fan
Pass spl_image and bootdev to board_return_bootrom. i.MX8MN needs the args to let ROM to load images Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-28rockchip: make_fit_atf.py: fix .its generation for a single atf imageHeiko Stuebner
The commit 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error") fixed the double-loading of the primary atf-image, but didn't take into account that there may be rare atf images with only that main section present. Right now this will result in a broken its due to the loadables section not getting closed correctly, so fix that by adapting the guards around the loop. The guards now protect against 0 segments when the bl31 binary doesn't contain any section and 1 segment when only a core atf section is present. Fixes: 619f002db864 ("rockchip: make_fit_atf.py: fix loadables property set error") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-28rockchip: misc: read the correct number of bytes from the efuseHeiko Stuebner
Originally the cpuid var the value gets read into was defined as u8 cpuid[RK3399_CPUID_LEN]; hence the sizeof(cpuid) would return the correct the correct number of array elements. With the move to a separate function cpuid becomes a pointer and sizeof(cpuid) hence returns the pointer size - 8 in the arm64 case. We do have the actual id length available as function param so use it for actual amount of bytes to read. Fixes: 04825384999f ("rockchip: rk3399: derive ethaddr from cpuid") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: spi-boot-order: Trival fix to newline missingJagan Teki
newline \n was missed in fdt_path_offset, error loop. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19rockchip: rk3288: vyasa: Drop ROCKCHIP_BROM_HELPER selectionJagan Teki
ROCKCHIP_BROM_HELPER is selected as if TPL/SPL ROCKCHIP_BACK_TO_BROM has been defined, so drop the explicit enablement for vyasa board. This change is supposed to missed during config move to other locations, and missed to drop the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-11rockchip: clean makefile for misc.cKever Yang
Use obj-$(config) instead of #ifdef $config to make the code looks clean, and move the misc_init for U-Boot proper only. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11rockchip: not depends on TPL_BUILD for rk3188 makefile includingKever Yang
The rk3188/Makefile already depends on !TPL_BUILD, so no need to add this again in parent Makefile, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23rockchip: rk3399: derive ethaddr from cpuidRohan Garg
Generate a MAC address based on the cpuid available in the efuse block: Use the first 6 byte of the cpuid's SHA256 hash and set the locally administered bits. Also ensure that the multicast bit is cleared. The MAC address is only generated and set if there is no ethaddr present in the saved environment. This is based off of Klaus Goger's work in 8adc9d Signed-off-by: Rohan Garg <rohan.garg@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23rockchip: rk3288: remove fennec board supportKever Yang
Since there is no one using this board, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-05rockchip: Kconfig: enable TPL support for rk3328Kever Yang
Enable TPL support and some related option in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: rk3328: set DDR as non-secure in SPLKever Yang
Set DDR as non-secure so that MMC DMA can access. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/bfe741ab9eb4f97371a4e6c24185419d57a3a75f and https://github.com/rockchip-linux/u-boot/commit/73d952acc8cc1ddad6652ba71895d9fe928c1e4b with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rv1108: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-26 02:41:25 +0000