summaryrefslogtreecommitdiff
path: root/arch/arm/mach-rockchip
AgeCommit message (Collapse)Author
2018-08-21dm: convert device_get_global_by_of_offset() to device_get_global_by_ofnode()Jean-Jacques Hiblot
Also add device_find_global_by_ofnode() that also find a device based on the OF node, but doesn't probe the device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-07-30Kconfig: Sort bool, default, select and imply optionsMichal Simek
Another round of sorting Kconfig entries aplhabetically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21rockchip: veyron: Set vcc33_sd regulator valueCarlo Caione
On the veyron board the vcc33_sd regulator is used as vmmc-supply for the SD card. This regulator is powered in the MMC core during power on but its value is never actually set. In the veyron platform the reset value for the LDO output is 1.8V while the standard (min and max) value for this regulator defined in the DTS is 3.3V. When the MMC core enable the regulator without setting its value, the output is automatically set to 1.8V instead of 3.3V. With this patch we preemptively set the value to 3.3V. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rk3288: Disable JTAG function from sdmmc0 IOCarlo Caione
The GRF_SOC_CON0.grf_force_jtag bit is automatically set at boot and it is preventing the SDMMC to work correctly. Disable the JTAG function on the assumption that a working SD has higher priority over JTAG. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rk3288: veyron: Init boot-on regulatorsCarlo Caione
Use regulators_enable_boot_on() to init all the regulators with regulator-boot-on property. Signed-off-by: Carlo Caione <carlo@endlessm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: rk3399: spl: add missing \n to outputHeinrich Schuchardt
Without the patch SPL (in case of an error) creates an output like: U-Boot SPL board initMissing DTB The patch adds the missing line feed. So now we get: U-Boot SPL board init Missing DTB Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-07-21rockchip: rk3399: inject 'u-boot, spl-boot-device' for next-stagePhilipp Tomsich
This implements the new 'spl_perform_fixups' hook for RK3399-based boards and injects the /chosen/u-boot,spl-boot-device with an ofpath corresponding to the boot device used. The intended usage is for the full U-Boot stage to evaluate this in scripts and then adapt its boot-order when using distro-boot. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2018-07-21rockchip: rk3188: add rk_board_late_init() hookAlexander Kochetkov
All other rockchip boards have rk_board_late_init() hook, so add it to rk3188 boards also. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-30fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flagAlex Kiernan
Rename fb_set_reboot_flag to fastboot_set_reboot_flag so it matches all other fastboot code in the global name space. Fix the guards around them so that they're dependent on FASTBOOT, not just USB_FUNCTION_FASTBOOT. Move the weak implementation of fastboot_set_reboot_flag to fb_common.c so we can call it from non-USB fastboot code. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-07arm: v7: Kconfig: Rename CPU_V7 as CPU_V7ALokesh Vutla
Currently CPU_V7 kconfig symbol supports only ARMv7A architectures under armv7 folder. This led to a misconception of creating separate folders for armv7m and armv7r. There is no reason to create separate folder for other armv7 based architectures when it can co-exist with few Kconfig symbols. As a first step towards a common folder, rename CPU_V7 as CPUV7A. Later separate Kconfig symbols can be added for CPU_V7R and CPU_V7M and can co exist in the same folder. Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Suggested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-25rockchip: enable SYS_NS16550 for all SoCs by defaultKever Yang
All rockchip SoCs can use ns16550 driver, enable it for all and set SYS_NS16550_MEM32 for all SoCs. Version-changes: 2 - use imply instead of select Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk322x: update MACRO for back-to-bromKever Yang
The MACRO has been update after: ee14d29 rockchip: back-to-bootrom: split BACK_TO_BOOTROM for TPL/SPL We need to update the C code for it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25arm: rockchip: make_fit_atf: remove unneeded importsPatrick Uiterwijk
These imports are entirely unused in the entire script. Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: use DM timer instead of rk_timerKever Yang
Disable rk_timer as SYS timer and use DM timer instead, so that we can get a better timer framework, the rk_timer is going to be clean after we conver to use DM timer or ARM arch/generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-02-24rockchip: rk3288: Fix wrong TPL_TEXT_BASEJagan Teki
TPL offset 0xff704004 is unaligned address which is adding nearest 8-bytes for next instruction, So 0xff704004 is adding 0x20 for proper alignment which is causing the next instruction data 0xefffffff is moved. Hexdump with overlaped bytes: ----------------------------- 0000000 0000 0000 0000 0000 0000 0000 0000 0000 0000010 0000 0000 0000 0000 0000 0000 ffff eaff So, Fix the TEXT_BASE for proper aligned address 0xff704000 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-02-24rockchip: rk3288: Add TPL_LDSCRIPTJagan Teki
Due to size limitations in SPL by adding falcon mode, rk3288 support TPL. In order to not overlap SPL_TEXT_BASE add TPL_TEXT_BASE with u-boot-tpl.lds that intern call u-boot-spl.lds with proper TEXT_BASE values. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-02-07spl: eMMC/SD: Provide one __weak spl_boot_mode() functionLukasz Majewski
The goal of this patch is to clean up the code related to choosing SPL MMC boot mode. The spl_boot_mode() now is called only in spl_mmc_load_image() function, which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled. To achieve the goal, all per mach/arch implementations eligible for unification has been replaced with one __weak implementation. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP) Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-28rockchip: rk3036: enable rockusb support on rk3036 based deviceEddie Cai
Rockchip Rockusb driver already merged. So we enable rockusb support on rk3036 based device. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-28rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driverDavid Wu
Clean the iomux definitions at grf_rk322x.h, and move them into pinctrl-driver for resolving the compiling error of redefinition. After that, define the uart2 iomux at rk322x-board file. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-10rockchip: rk3288: enable rockusb support on rk3288 based deviceEddie Cai
this patch enable rockusb support on rk3288 based device. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-18rockchip: add a common script for generate fit itsKever Yang
Rockchip release bl31.elf file for armv8 SoCs like rk3399, rk3328, the elf have more than one section, we need to decode it first and packed them into u-boot.itb with its file. This script is to generate the its script. Need default bl31.elf in root directory of U-Boot source and dtb as parameter. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-12-18rockchip: update ROCKCHIP_SPL_RESERVE_IRAM to 0Kever Yang
Only rk3399 atf need ROCKCHIP_SPL_RESERVE_IRAM. This commit updates its default setting to 0 so that other SoCs do not need to define it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3036: sdram: correct setting for pll integer modeKever Yang
According to rk3036 TRM, should be set to '1' for the pll integer mode, while the '0' means the frac mode. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3036: update clock driver for ddrKever Yang
After the MASK MACRO update, we need to update the driver at the same time. This is a fix to: 37943aa rockchip: rk3036: clean mask definition for cru reg Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3036: fix pll config for correct frequencyKever Yang
There is a fixed div-2 between PLL and clk_ddr/clk_ddrphy, so we need to double to pll output and then ddr can work in correct frequency. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add evb-rk3128 supportKever Yang
evb-rk3128 is an evb from Rockchip based on rk3128 SoC: - 2 USB2.0 Host port; - 1 HDMI port; - 2 10/100M eth port; - 2GB ddr; - 16GB eMMC; - UART to USB debug port; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add clock driverKever Yang
Add rk3128 clock driver and cru structure definition. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30rockchip: rk3128: add soc basic supportKever Yang
RK3128 is a SoC from Rockchip with quad-core Cortex-A7 CPU and mali400 GPU. Support Nand flash, eMMC, SD card, USB 2.0 host and device, HDMI/LVDS/MIPI display. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-26rockchip: fix turning off boot-mode via KconfigPhilipp Tomsich
The ROCKCHIP_BOOT_MODE_REG option defaults to a hex value, so 0 will show as 0x0 if a default is provided and changed via Kconfig. However, it still will show as 0, if no default is given. Consequently, the "is set to something other than 0" test in a Makefile is cumbersome. Instead this check can easily be performed in the C-code. This removes the ifeq-check from mach-rockchip/Makefile, adds a matching #if-check to boot_mode.c and fixes resulting link issues (if boot_mode.o was not included due to the Makefile check) by defining a stub function (in case the functionality is not built in) for setup_boot_mode in boot_mode.c. Fixes: e306779 (rockchip: make boot_mode related codes reused across all platforms) Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: check download key before bootupAndy Yan
Enter download mode if the download key pressed. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Converted printfs in boot_mode.c to debug/pr_err:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: add support for enter to bootrom download modeAndy Yan
Rockchip bootrom will enter download mode if it returns from spl/tpl with a non-zero value and couldn't find a valid image in the backup partition. This patch provide a method to instruct the system to back to bootrom download mode by checking the BROM_DOWNLOAD_FLAG register. As the bootrom download function relys on some modules such as interrupts, so we need to back to bootrom as early as possbile before the tpl/spl code override the interrupt configurations. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: make boot_mode related codes reused across all platformsAndy Yan
setup_boot_mode function use the same logic but different mode register address across all the rockchip platforms, so it's better to make this function reused across all the platforms, and let the mode register address setting from the config file. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: rk3188: move CONFIG_SPL_* entries from rk3188_common.h to KconfigPhilipp Tomsich
There still are a few CONFIG_SPL_* options selected using defines from rk3188_common.h instead of via Kconfig. This migrates those over to Kconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: back-to-bootrom: allow passing a cmd to the bootromPhilipp Tomsich
The BROM supports forcing it to enter download-mode, if an appropriate result/cmd-word is returned to it. There already is a series to support this in review, so this prepares the (newly C-version) of the back-to-bootrom code to accept a cmd to passed on to the BROM. All the existing call-sites are adjusted to match the changed function signature. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2017-11-21rockchip: rk3188: use boot0 hook to load up SPL in 2 stepsPhilipp Tomsich
For the RK3188, the BROM will attempt to load up the first stage image (SPL for the RK3188) in two steps: first 1KB to offset 0x800 in the SRAM and then the remainder to offset 0xc00 in the SRAM. It always enters at 0x804, though. With this changeset, the RK3188 boot removes the TPL (stub) stage and builds a single SPL binary that utilizes the early back-to-bootrom via the boot0-hook. Consequently, the passing of the saved boot params via pmu->os_reg[2] is also removed. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-21rockchip: back-to-bootrom: replace assembly-implementation with C-codePhilipp Tomsich
The back-to-bootrom implementation for Rockchip has always relied on the stack-pointer being valid on entry, so there was little reason to have this as an assembly implementation. This provides a new C-only implementation of save_boot_params and back_to_bootrom (relying on setjmp/longjmp) and removes the older assembly-only implementation. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2017-11-21rockchip: boot0 hook: support early return for RK3188/RK3066-style BROMPhilipp Tomsich
Some Rockchip BROM versions (e.g. the RK3188 and RK3066) first read 1KB data from NAND into SRAM and executes it. Then, following a return to bootrom, the BROM loads additional code to SRAM (not overwriting the first block read) and reenters at the same address as the first time. To support booting either a TPL (on the RK3066) or SPL (on the RK3188) using this model of having to count entries, this commit adds code to the boot0 hook to track the number of entries and handle them accordingly. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2017-11-21rockchip: enable boot0-hook for all Rockchip SoCsPhilipp Tomsich
Rockchip SoCs bootrom design is like this: - First 2KB or 4KB internal memory is for bootrom stack and heap; - Then the first 4-byte suppose to be a TAG like 'RK33'; - The the following memory address end with '0004' is the first instruction load and running by bootrom; Let's use the boot0 hook to reserve the first 4-byte tag for all the Rockchip SoCs. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Commit message taken from an older patch by:] Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2017-11-01rockchip: rk3328: fix rockchip_get_cru apiKever Yang
The API for get priv pointer is wrong, fix it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-04treewide: replace with error() with pr_err()Masahiro Yamada
U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-01rk3288: spl: Add dram_init_banksizeJagan Teki
Falcon mode, is updating DDR dt node configuration through spl_fixup_fdt() so add appropriate DDR base and size through dram_init_banksize. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()Philipp Tomsich
To support the new "same-as-spl" specifier in the boot-order on the RK3399, this implements the chip-specific mapping from the information obtainable from the BROM to a OF path name. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-orderPhilipp Tomsich
It is often desirable to configure the spl-boot-order (i.e. the order that SPL probes devices to find the FIT image containing a full U-Boot) such that it contains 'the same device the SPL stage was booted from' early on. To support this, we introduce the 'same-as-spl' specifier for the spl-boot-order property. This commit adds: - documentation for the new board_spl_was_booted_from() function that individual SoCs/boards should provide, if they can determine where the SPL was booted from - implements the new board_spl_was_booted_from() stub function - adds support for handling the 'same-as-spl' specifier and calling into the per-SoC/per-board support code. This also updates the documentation for the 'u-boot,spl-boot-order' property. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: spl: add documentation for spl_node_to_boot_device()Philipp Tomsich
In the expectation that the spl-boot-order code will eventually gain use outside of mach-rockchip: let's add documentation on the spl_node_to_boot_device() function, which is likely to become a publicly exported function. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: rk3399: make spl_board_init board-specificPhilipp Tomsich
The later-stage spl_board_init (as opposed to board_init_f) should set up board-specific details: these differ between the EVB-RK3399 and the RK3399-Q7 (Puma). This moves spl_board_init back into the individual boards and removes the unneeded functionality from Puma. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk322x: update the sysreg number for boot modeKever Yang
The boot mode for rk322x is stored in sysreg 0, update it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rk3288: vyasa: Add TPL supportJagan Teki
Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add new SPL features like Falcon mode or etc. So add TPL stage so-that adding new features to SPL is possible. - TPL: DRAM init, clocks - SPL: MMC, falcon, etc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01armv7: rk3288: Move configure_l2ctlr to commonJagan Teki
configure_l2ctlr will be shared between SPL and TPL so move them into asm/arch/sys_proto.h Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit (git 2.34.1) at 2024-12-29 03:04:06 +0000