summaryrefslogtreecommitdiff
path: root/arch/arm/mach-stm32/stm32f7
AgeCommit message (Collapse)Author
2018-03-13board: stm32: switch to DM STM32 timerPatrice Chotard
Use available DM stm32_timer driver instead of dedicated mach-stm32/stm32fx/timer.c. Remove all defines or files previously used for timer usage in arch/arm/include/asm/arch-stm32fx and in arch/arm/mach-stm32/stm32fx Enable DM STM32_TIMER for STM32F4/F7 and H7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-29mach-stm32: Factorize MPU's region config for STM32 SoCsPatrice Chotard
MPU's region setup can be factorized between STM32F4/F7/H7 SoCs family and used a common MPU's region config. Only one exception for STM32H7 which doesn't have device area located at 0xA000 0000. For STM32F4, configure_clocks() need to be moved from arch_cpu_init() to board_early_init_f(). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-29stm32: migrate clock structs in include/stm32_rcc.hPatrice Chotard
In order to factorize code between STM32F4 and STM32F7 migrate all structs related to RCC clocks in include/stm32_rcc.h Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-06stm32: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08ARM: stm32f7: fix prescaler calculation of timerBo Shen
As the timer 2 is on APB1 bus, the maximum of clock frequency of APB1 timer clock is half of SYSCLK. Then to calculate the timer prescaler for timer 2 which need to be divided by 2. Signed-off-by: Bo Shen <voice.shen@gmail.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-06stm32: Correct positioning of declarationSimon Glass
The current code gives a warning: arch/arm/mach-stm32/stm32f7/soc.c: In function 'arch_cpu_init': arch/arm/mach-stm32/stm32f7/soc.c:38:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++) ^ arch/arm/mach-stm32/stm32f7/soc.c:38:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Fix it by moving the declaration to the top of the function. Signed-off-by: Simon Glass <sjg@chromium.org> Series-cc trini
2017-05-12stm32f7: configure mpu valid for f7 familyVikas Manocha
This configuration should be valid for all F7 family devices in general. Here is the regions info: - Region0 : 4GB : cacheable & executable. - Region1 : 512MB : text area : strogly ordered & executable. - Region2 : 512MB : peripherals : device memory & non-executable. - Region3 : 512MB : peripherals : device memory & non-executable. - Region4 : 512MB : cortexM area: strongly ordered & non-executable. Higher region number overrides the lower region configuration. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12stm32: use armv7m MPU configuration supportVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-04-08stm32f7: enable instruction & data cacheVikas Manocha
It also enables commands for cache enable/disable/status. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-03-17clk: stm32f7: add clock driver for stm32f7 familyVikas Manocha
add basic clock driver support for stm32f7 to enable clocks required by the peripherals. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28ARM: SPI: stm32: add stm32f746 qspi driverMichael Kurz
This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2017-01-28net: stm32: add designware mac glue code for stm32Michael Kurz
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28ARM: stm32: use clock setup function defined in clock.cMichael Kurz
Use the clock setup function defined in clock.c instead of setting the clock bits directly in the drivers. Remove register definitions of RCC in rcc.h as these are already defined in the struct in stm32.h Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-01-28ARM: stm32: cleanup stm32f7 filesMichael Kurz
Cleanup stm32f7 files: - use BIT macro - use GENMASK macro - use rcc struct instead of macro additions Add missing stm32f7 register in rcc struct Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA<vikas.manocha@st.com>
2016-07-21Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"Tom Rini
Per Vikas' request, the problem this commit is supposed to be solving is something he doesn't see and further this introduces additional hardware requirements. This reverts commit 4b2fd720a7b2f78c42d1565edf4c67f378c65440. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-14stm32: Change USART port to USART6 for stm32f746 discovery boardToshifumi NISHINAGA
This change is to remove a halt at about 200KiB while sending a large(1MiB) binary to a micro controller using USART1. USART1 is connected to a PC via an on-board ST-Link debugger that also functions as a USB-Serial converter. However, it seems to loss some data occasionally. So I changed the serial port to USART6 and connected it to the PC using an FTDI USB-Serial cable, therefore the transmission was successfully completed. Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: Add SDRAM support for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds SDRAM support for stm32f746 discovery board. This patch depends on previous patch. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: clk: Add 200MHz clock configuration for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds 200MHz clock configuration for stm32f746 discovery board. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-02-24stm32: add support for stm32f7 & stm32f746 discovery boardVikas Manocha
This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
generated by cgit (git 2.34.1) at 2024-12-26 15:46:07 +0000