summaryrefslogtreecommitdiff
path: root/arch/arm/mach-stm32
AgeCommit message (Collapse)Author
2018-01-10board: stm32: add stm32f469-discovery board supportPatrice Chotard
This board offers : _ STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory and 324 Kbytes of RAM in BGA216 package _ On-board ST-LINK/V2-1 SWD debugger, supporting USB reenumeration capability: _ Mbed-enabled (mbed.org) _ USB functions: USB virtual COM port, mass storage, debug port _ 4 inches 800x480 pixel TFT color LCD with MIPI DSI interface and capacitive touch screen _ SAI Audio DAC, with a stereo headphone output jack _ 3 MEMS microphones _ MicroSD card connector _ I2C extension connector _ 4Mx32bit SDRAM _ 128-Mbit Quad-SPI NOR Flash _ Reset and wake-up buttons _ 4 color user LEDs _ USB OTG FS with Micro-AB connector _ Three power supply options: _ Expansion connectors and Arduino™ UNO V3 connectors Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10board: stm32f429-disco: switch to DM STM32 clock driverPatrice Chotard
Use available DM clk_stm32f.c driver instead of dedicated mach-stm32/stm32f4/clock.c. Migrate periph_clock defines from stm32_periph.h directly in CLK driver. These periph_clock defines will be removed when STMMAC, TIMER2 and SYSCFG drivers will support DM CLK. Enable also CLK flag. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10mach-stm32: stmf32f4: timer: remove clock_get() callPatrice Chotard
In order to use common clock driver between STM32F4 and STM32F7, remove clock_get() call As APB_PSC is always set to 2, only case when clock_get(CLOCK_AHB) != clock_get(CLOCK_APB1) is kept Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-29mach-stm32: Factorize MPU's region config for STM32 SoCsPatrice Chotard
MPU's region setup can be factorized between STM32F4/F7/H7 SoCs family and used a common MPU's region config. Only one exception for STM32H7 which doesn't have device area located at 0xA000 0000. For STM32F4, configure_clocks() need to be moved from arch_cpu_init() to board_early_init_f(). Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-29stm32: migrate clock structs in include/stm32_rcc.hPatrice Chotard
In order to factorize code between STM32F4 and STM32F7 migrate all structs related to RCC clocks in include/stm32_rcc.h Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-06stm32: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08ARM: stm32f7: fix prescaler calculation of timerBo Shen
As the timer 2 is on APB1 bus, the maximum of clock frequency of APB1 timer clock is half of SYSCLK. Then to calculate the timer prescaler for timer 2 which need to be divided by 2. Signed-off-by: Bo Shen <voice.shen@gmail.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-09-22board: Add stm32h7 SoC, discovery and evaluation boards supportPatrice Chotard
This patch adds support for stm32h7 soc family, stm32h743 discovery and evaluation boards. For more information about STM32H7 series, please visit: http://www.st.com/en/microcontrollers/stm32h7-series.html Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-26spl: stm32: make falcon mode activation configurableVikas Manocha
With this change, it will be possible to de-select falcon mode & spl will only boot U-Boot. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Suggested-by: Bo Shen <voice.shen@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13stm32f1: remove stm32f1 supportPatrice Chotard
A few years ago STM32F1 SoCs support has been added : 0144caf22ce6acd5c gpio: stm32: add stm32f1 support 2d18ef2364fd3561a ARMv7M: add STM32F1 support But neither STM32F1 dedicated defconfig nor board was associated to these commits. Got confirmation from Tom Rini and Matt Porter to remove all this code [1] [1] http://u-boot.10912.n7.nabble.com/Remove-STM32F1-support-td301603.html Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13stm32: remove redundant 'else if'xypron.glpk@gmx.de
The if in the else branch is superfluous. We can use a simple if. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-08-04stmf32f4: soc: fix buildman compilation errorPatrice Chotard
fix the following compilation error reported by buidlman: arm: + stm32f429-discovery +arch/arm/mach-stm32/stm32f4/soc.c: In function 'arch_cpu_init': +arch/arm/mach-stm32/stm32f4/soc.c:30:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode + for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++) + ^ +arch/arm/mach-stm32/stm32f4/soc.c:30:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code +make[3]: *** [arch/arm/mach-stm32/stm32f4/soc.o] Error 1 +make[2]: *** [arch/arm/mach-stm32/stm32f4] Error 2 +make[1]: *** [arch/arm/mach-stm32] Error 2 +make: *** [sub-make] Error 2 Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-06stm32: Correct positioning of declarationSimon Glass
The current code gives a warning: arch/arm/mach-stm32/stm32f7/soc.c: In function 'arch_cpu_init': arch/arm/mach-stm32/stm32f7/soc.c:38:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++) ^ arch/arm/mach-stm32/stm32f7/soc.c:38:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code Fix it by moving the declaration to the top of the function. Signed-off-by: Simon Glass <sjg@chromium.org> Series-cc trini
2017-06-09spl: stm32f7: configure for xip bootingVikas Manocha
With xip booting configuration, we don't need to copy the next image (U-Boot or linux xipimage) from flash to sdram area. Flash memory organization is like this: spl-U-Boot: u-boot-spl.bin : 0x0800_0000 U-Boot : u-boot-dtb.bin : 0x0800_8000 linux : xipImage : 0x0800_8000 It is also possible to have U-Boot binary & linux binaries configured at different addresses of flash memory like U-Boot at 0x0800_8000 & linux xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for U-Boot as next binary with SPL_OS_BOOT option disabled. By default, spl is configured to boot linux xipImage. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09spl: stm32f7: add kernel boot supportVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09stm32: stm32f7: add spl build supportVikas Manocha
This commit supports booting from stm32 internal nor flash. spl U-Boot initializes the sdram memory, copies next image (e.g. standard U-Boot) to sdram & then jumps to entry point. Here are the flash memory addresses for U-Boot-spl & standard U-Boot: - spl U-Boot : 0x0800_0000 - standard U-Boot : 0x0800_8000 To compile u-boot without spl: Remove SUPPORT_SPL configuration (arch/arm/mach-stm32/Kconfig) Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Rework Kconfig logic a bit] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-12stm32f7: configure mpu valid for f7 familyVikas Manocha
This configuration should be valid for all F7 family devices in general. Here is the regions info: - Region0 : 4GB : cacheable & executable. - Region1 : 512MB : text area : strogly ordered & executable. - Region2 : 512MB : peripherals : device memory & non-executable. - Region3 : 512MB : peripherals : device memory & non-executable. - Region4 : 512MB : cortexM area: strongly ordered & non-executable. Higher region number overrides the lower region configuration. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12stm32: use armv7m MPU configuration supportVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-04-08stm32f7: enable instruction & data cacheVikas Manocha
It also enables commands for cache enable/disable/status. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-03-17clk: stm32f7: add clock driver for stm32f7 familyVikas Manocha
add basic clock driver support for stm32f7 to enable clocks required by the peripherals. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28ARM: SPI: stm32: add stm32f746 qspi driverMichael Kurz
This patch adds support for the QSPI IP found in stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2017-01-28net: stm32: add designware mac glue code for stm32Michael Kurz
This patch adds glue code required for enabling the designware mac on stm32f7 devices. Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-01-28ARM: stm32: use clock setup function defined in clock.cMichael Kurz
Use the clock setup function defined in clock.c instead of setting the clock bits directly in the drivers. Remove register definitions of RCC in rcc.h as these are already defined in the struct in stm32.h Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-01-28ARM: stm32: cleanup stm32f7 filesMichael Kurz
Cleanup stm32f7 files: - use BIT macro - use GENMASK macro - use rcc struct instead of macro additions Add missing stm32f7 register in rcc struct Signed-off-by: Michael Kurz <michi.kurz@gmail.com> Acked-by: Vikas MANOCHA<vikas.manocha@st.com>
2016-07-21Revert "stm32: Change USART port to USART6 for stm32f746 discovery board"Tom Rini
Per Vikas' request, the problem this commit is supposed to be solving is something he doesn't see and further this introduces additional hardware requirements. This reverts commit 4b2fd720a7b2f78c42d1565edf4c67f378c65440. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-14stm32: Change USART port to USART6 for stm32f746 discovery boardToshifumi NISHINAGA
This change is to remove a halt at about 200KiB while sending a large(1MiB) binary to a micro controller using USART1. USART1 is connected to a PC via an on-board ST-Link debugger that also functions as a USB-Serial converter. However, it seems to loss some data occasionally. So I changed the serial port to USART6 and connected it to the PC using an FTDI USB-Serial cable, therefore the transmission was successfully completed. Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: Add SDRAM support for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds SDRAM support for stm32f746 discovery board. This patch depends on previous patch. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14stm32: clk: Add 200MHz clock configuration for stm32f746 discovery boardToshifumi NISHINAGA
This patch adds 200MHz clock configuration for stm32f746 discovery board. This patch is based on STM32F4 and emcraft's[1]. [1]: https://github.com/EmcraftSystems/u-boot Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-03-26stm32: stm32f4: move flash driver to mtd driver locationVikas Manocha
Same flash driver can be used by other stm32 families like stm32f7. Better place for this driver would be mtd driver location. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24stm32: add support for stm32f7 & stm32f746 discovery boardVikas Manocha
This patch adds support for stm32f7 family & stm32f746 board. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-24gpio: stm32_gpio: move clock config from driver to boardVikas Manocha
This patch removes the gpio clock enable from gpio driver & move it in the board code, making it possible to use the gpio driver with other socs. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2016-02-08serial: serial_stm32: move clock config from driver to boardVikas Manocha
This patch removes the uart clock enable from serial driver & move it in the board code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-20stm32: move stm32 specific code to mach-stm32Vikas Manocha
This patch moves stm32 sources at one place, with this armv7m now contains only generic stuff. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
generated by cgit (git 2.34.1) at 2024-12-26 20:58:47 +0000