summaryrefslogtreecommitdiff
path: root/arch/arm/mach-stm32mp
AgeCommit message (Collapse)Author
2020-04-22spl: mmc: Rename spl_boot_partition() to spl_mmc_boot_partition()Harald Seiler
This function is only relevant to the MMC driver so calling it spl_boot_partition() might be confusing. Rename it to spl_mmc_boot_partition() to make its purpose more clear (and bring it in line with spl_mmc_boot_mode()). Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()Harald Seiler
The function's name is misleading as one might think it is used generally to select the boot-mode when in reality it is only used by the MMC driver to find out in what way it should try reading U-Boot Proper from a device (either using a filesystem, a raw sector/partition, or an eMMC boot partition). Rename it to spl_mmc_boot_mode() to make it more obvious what this function is about. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler <hws@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16Revert "stm32mp1: remove the imply BOOTSTAGE"Patrick Delaunay
This reverts the workaround introduced by the commit 16fec9b0bc1a ("stm32mp1: remove the imply BOOTSTAGE") As the bootstage alignment issue is now solved. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-15configs: stm32mp1: replace STM32MP1_TRUSTED by TFABOOTPatrick Delaunay
Activate ARCH_SUPPORT_TFABOOT and replace the arch stm32mp specific config CONFIG_STM32MP1_TRUSTED by the generic CONFIG_TFABOOT introduced by the commit 535d76a12150 ("armv8: layerscape: Add TFABOOT support"). This config CONFIG_TFABOOT is activated for the trusted boot chain, when U-Boot is loaded by TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-15ARM: dts: stm32: Define FMC2 base addressMarek Vasut
Define FMC2 base address, for use in board files, until there is an actual FMC2 bus driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-03-31Merge branch 'next' of git://git.denx.de/u-boot-usb into nextTom Rini
2020-03-24ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDRPatrick Delaunay
Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2 form 1.2V to 1.25V for 32bits configuration. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24stm32mp: psci: set cntfrq register of cpu onLudovic Barre
This path allows to set the cntfrq register of targeted cpu. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24stm32mp1: add 800 MHz profile supportPatrick Delaunay
The STM32MP1 series is available in 3 different lines which are pin-to-pin compatible: - STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD - STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz and CAN FD - STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz Each line comes with a security option (cryptography & secure boot) & a Cortex-A frequency option : - A : Cortex-A7 @ 650 MHz - C : Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz - D : Cortex-A7 @ 800 MHz - F : Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz This patch adds the support of STM32MP15xD and STM32MP15xF in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24arm: stm32mp: fdt: update kernel device tree according the part numberPatrick Delaunay
Update the kernel device tree for STM32MP15x product lines according the used soc and its part number, when CONFIG_OF_SYSTEM_SETUP is activated: - STM32MP15XA hasn't Crypto (cryp1/2) - STM32M151 and STM32M153 hasn't 3D GPU and DSI host - STM32M151 hasn't CAN FD and has single A7 For example: FDT: cpu 1 node remove for STM32MP151AAA Rev.B FDT: can@4400e000 node disabled for STM32MP151AAA Rev.B FDT: gpu@59000000 node disabled for STM32MP151AAA Rev.B FDT: dsi@5a000000 node disabled for STM32MP151AAA Rev.B Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24arm: stm32mp: add function get_soc_namePatrick Delaunay
Add a function get_soc_name to get a string with the full name of the SOC "STM32MP15xxx Rev.x" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24arm: stm32mp: improve the error message for smcPatrick Delaunay
Add the SMC code and operation for trace on errors. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24arm: stm32mp: bsec: add permanent lock support in bsec driverPatrick Delaunay
Add BSEC lock access (read / write) at 0xC0000000 offset of misc driver. The write access only available for Trusted boot mode, based on new SMC STM32_SMC_WRLOCK_OTP. With the fuse command, the permanent lock status is accessed with 0x10000000 offset (0xC0000000 - 0x8000000 for OTP sense/program divided by u32 size), for example: Read lock status of fuse 57 (0x39) STM32MP> fuse sense 0 0x10000039 1 Sensing bank 0: Word 0x10000039: 00000000 Set permanent lock of fuse 57 (0x39) STM32MP> fuse prog 0 0x10000039 1 Sensing bank 0: Word 0x10000039: 00000000 WARNING: the OTP lock is updated only after reboot WARING: Programming lock or fuses is an irreversible operation! This may brick your system. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24arm: stm32mp: bsec: remove unneeded testPatrick Delaunay
Remove the test offs < 0 , as offs is unsigned. This patch solves the warnings when compiling with W=1 on stm32mp1 board: In function ‘stm32mp_bsec_read’: arch/arm/mach-stm32mp/bsec.c:368:11: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 368 | if (offs < 0 || (offs % 4) || (size % 4)) | ^ In function ‘stm32mp_bsec_write’: arch/arm/mach-stm32mp/bsec.c:405:11: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 405 | if (offs < 0 || (offs % 4) || (size % 4)) | ^ Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-10stm32mp: update dependency for STM32_ETZPCPatrick Delaunay
Correct the dependency for STM32 ETZPC protection, linked to SOC STM32MP identified by CONFIG_STM32MP15x and not linked to CONFIG_TARGET_STM32MP1 (no more existing). This patch fix an issue introduced by commit 846254888e2e ("stm32mp1: split board and SOC support for STM32MP15x family"). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13stm32mp1: support of STM32MP15x Rev.ZPatrick Delaunay
Add support for Rev.Z of STM32MP15x cpu. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13stm32mp1: pwr: use the last binding for pwrPatrick Delaunay
Update the driver to use the latest binding from kernel v5.5-rc1: no more use syscon or regmap to access to pwr register and only one pwr_regulators node with the compatibility "st,stm32mp1,pwr-reg" is available. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-12ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 boardMarek Vasut
Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-01-20Merge tag 'u-boot-stm32-20200117' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp1: split SOC and board and cleanup config
2020-01-17common: Move hang() to the same header as panic()Simon Glass
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17stm32mp1: split board and SOC support for STM32MP15x familyPatrick Delaunay
Split the board and SOC support for STM32MP15x family and prepare the introduction of new boards with STM32MP15x. This path define the 2 configurations: - STM32MP15x: STM32MP15x soc support (new) - TARGET_ST_STM32MP15x: STMicroelectronics board support (choice) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17ARM: stm32: Allow overriding setup_mac_address()Marek Vasut
Let board code override setup_mac_address(), which is useful e.g. if the board derives the MAC address from another source, like an I2C EEPROM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17stm32mp: remove redundant SYS_TEXT_BASE promptThomas Hebb
The main prompt for this (defined in /Kconfig) is visible at all times, which means there's no reason to have an additional, machine-specific prompt to set the same option. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2020-01-07stm32mp1: reset coprocessor status at cold bootFabien Dessenne
Reset ResourceTableAddress and CoprocessorState at cold boot, preserve these values at standby wakeup. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07stm32mp1: declare backup registers for coprocessorFabien Dessenne
Use the backup register #17 as coprocessor resource table address and backup register #18 as coprocessor state. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-18stm32mp1: remove the imply BOOTSTAGEPatrick Delaunay
This patch is only a temporarily workaround for crash introduced by commit ac9cd4805c8b ("bootstage: Correct relocation algorithm"). The crash occurs because the bootstage struct is not correctly aligned when BOOTSTAGE feature is activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-18stm32mp1: imply CMD_CLSPatrick Delaunay
Activate by default the command CLS (clear screen); this command used in pxe or sysboot command (DISTRO support) when the "menu background" keyword is present. This patch avoid the warning "Unknown command 'cls'" with extlinux.conf: # Generic Distro Configuration file generated by OpenEmbedded menu title Select the boot mode MENU BACKGROUND /splash.bmp TIMEOUT 20 DEFAULT stm32mp157c-ev1-emmc LABEL stm32mp157c-ev1-emmc KERNEL /uImage FDT /stm32mp157c-ev1.dtb APPEND root=/dev/mmcblk1p4 rootwait rw console=ttySTM0,115200 ... Retrieving file: /mmc0_stm32mp157c-ev1_extlinux/extlinux.conf 614 bytes read in 36 ms (16.6 KiB/s) Retrieving file: /splash.bmp 46180 bytes read in 40 ms (1.1 MiB/s) Unknown command 'cls' - try 'help' Select the boot mode 1: stm32mp157c-ev1-sdcard ... Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-27bsec: update after MISC u-class updatePatrick Delaunay
Since the commit 8729b1ae2cbd ("misc: Update read() and write() methods to return bytes xfered"); The misc bsec driver need to be adapted to reflect the number of transferred bytes. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: Makefile cleanupPatrick Delaunay
Don't compile psci for SPL build. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: add spi load support in splPatrick Delaunay
Add the boot for NOR, SPL load U-Boot.img at offset CONFIG_SYS_SPI_U_BOOT_OFFS = 0x80000. It is the start address of mtd partition ssbl in nor. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: add condition to activate WATCHDOG in SPLPatrick Delaunay
Only activate WATCHDOG in SPL when CONFIG_WATCHDOG is activated in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: Activate DISABLE_CONSOLEPatrick Delaunay
Activate DISABLE_CONSOLE needed for stm32prog support on uart. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: select CONFIG_STM32_SERIALPatrick Delaunay
Select the serial driver mandatory for the console. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: activate PRE_CONSOLE_BUFFERPatrick Delaunay
Correctly handle silent=1 in the default environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: configs: activate CONFIG_SILENT_CONSOLEPatrick Delaunay
Allow to disable console with environment variable 'silent': > env set silent 1; env save Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stpmic1: program pmic to keep only the debug unit onPatrick Delaunay
Depending on backup register value, we maintain the debug unit powered-on for debugging purpose. Only BUCK1 is required for powering the debug unit, so revert the setting for all the other power lanes, except BUCK3 that has to be always on. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-19sysreset: move stm32mp sysreset poweroff implementation to sysreset uclassUrja Rannikko
This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF to signal when we need it. Enable it from the STPMIC1 config and in sandbox. The config flag is transitionary, that is it can be removed after all poweroff implementations use sysreset, and just have CMD_POWEROFF depend on sysreset. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-19sysreset: switch to using SYSRESET_POWER_OFF for poweroffUrja Rannikko
It seems that SYSRESET_POWER_OFF was added recently, and all previous code used SYSRESET_POWER for poweroff. SYSRESET_POWER is supposed to be a PMIC-level power cycle, not a poweroff. (Comment by Simon Glass) SYSRESET_POWER means to do a power reset (removing and reinstating all power) SYSRESET_POWER_OFF means to turn the device off and leave it off Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> (Update comment to help understand the patch) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-11env: Drop environment.h header file where not neededSimon Glass
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-24psci: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: arch/arm/mach-stm32mp/psci.c: warning: no previous prototype for ‘psci_set_state’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_arch_cpu_entry’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_features’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_version’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_affinity_info’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_migrate_info_type’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_cpu_on’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_cpu_off’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_system_reset’ [-Wmissing-prototypes] warning: no previous prototype for ‘psci_system_off’ [-Wmissing-prototypes] Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: bsec: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: arch/arm/mach-stm32mp/bsec.c: In function 'stm32mp_bsec_read': warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (offset >= STM32_BSEC_OTP_OFFSET) { ^~ arch/arm/mach-stm32mp/bsec.c: In function 'stm32mp_bsec_write': warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (offset >= STM32_BSEC_OTP_OFFSET) { ^~ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: Fix warnings when compiling with W=1Patrick Delaunay
This patch solves the following warnings: arch/arm/mach-stm32mp/cpu.c:378:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (instance > ARRAY_SIZE(serial_addr)) ^ Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: activate OF_BOARD_SETUP and FDT_FIXUP_PARTITIONSPatrick Delaunay
Update kernel MTD partition in device tree with U-Boot information. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add configuration op-teePatrick Delaunay
Add support of Trusted boot chain with OP-TEE - reserved 32MB at the end of the DDR for OP-TEE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: key: add stm32key commandPatrick Delaunay
Add dedicated command to register in fuse a public hash key provided by keygen tool. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: update device tree with ETZPC statusPatrick Delaunay
U-Boot should disable nodes in device tree if needed according ETZPC status in ft_system_setup(). ETZPC itself use an array on addresses to do the match between the status bits and the node. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-27 04:16:29 +0000