summaryrefslogtreecommitdiff
path: root/arch/arm/mach-uniphier/dram
AgeCommit message (Collapse)Author
2017-10-23ARM: uniphier: use pr_*() more where appropriateMasahiro Yamada
Commit dd74b945af2e ("ARM: uniphier: use pr_() instead of printf() where appropriate"), but I missed to update this file for some reason. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: uniphier: use pr_() instead of printf() where appropriateMasahiro Yamada
Replace printf() with pr_() to specify proper loglevel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20ARM: uniphier: remove sLD3 SoC supportMasahiro Yamada
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-26ARM: uniphier: remove SPL support for ARMv8 SoCsMasahiro Yamada
It has been a while since ARM Trusted Firmware supported UniPhier SoC family. U-Boot SPL was intended as a temporary loader that runs in secure world. It is a maintenance headache to support two different boot mechanisms. Secure firmware is realm of ARM Trusted Firmware and now U-Boot only serves as a non-secure boot loader for UniPhier ARMv8 SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-25ARM: uniphier: fix various sparse warningsMasahiro Yamada
Fix warnings reported by sparse: - ... was not declared. Should it be static?" - cast to restricted __be32 While fixing those, the type conflict of cci500_init() was found. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-23ARM: uniphier: add DRAM PHY clock duty adjustment for LD20 SoCKotaro Hayashi
If the DRAM clock duty does not meet the allowable tolerance, it is marked in an efuse register. If the register is fused, the boot code should compensate for the DRAM clock duty error. Signed-off-by: Kotaro Hayashi <hayashi.kotaro@socionext.com> [masahiro: simplify code, add git-log] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-23ARM: uniphier: remove dram_nr_ch from board parametersMasahiro Yamada
This parameter is redundant because we can know the number of channels by checking if dram_ch[2].size is zero. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29ARM: uniphier: refactor cmd_ddrmphyMasahiro Yamada
Make it look like cmd_ddrphy. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29ARM: uniphier: clean up UMC init for PXs2 SoCMasahiro Yamada
Just cosmetic changes: - Rename prefix DMPHY_ to MPHY_ for consistency - Move UMC parameters below for complete decouple of PHY and UMC - Remove redundant whitespaces Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29ARM: uniphier: refactor cmd_ddrphyMasahiro Yamada
It seems more readable to use arrays to get SoC specific parameters instead of the crappy switch statement. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29ARM: uniphier: shrink arrays of DDR-PHY parameters for LD20 SoCMasahiro Yamada
The two arrays ddrphy_{op,ip}_dq_shift_val, occupy more than 3.8 KB memory footprint, which is significant in SPL. There are PHY parameters for 5 boards, but they are actually not board specific, but SoC specific. After all, we just need to have 2 patterns, for LD20 and LD21. Also, the shift values are small enough to become "short" type instead of "int". This change will save about 3 KB memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: simplify SoC ID get functionMasahiro Yamada
Currently, uniphier_get_soc_type() converts the SoC ID (this is read from the revision register) to an enum symbol to use it for SoC identification. Come to think of it, there is no need for the conversion in the first place. Using the SoC ID from the register as-is a straightforward way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: replace <linux/err.h> with <linux/errno.h>Masahiro Yamada
These files only need error number macros. Actually, IS_ERR(), PTR_ERR(), ERR_PTR(), etc. are not useful for U-Boot. Avoid unnecessary header includes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: fix delay fixup code in LD11 UMC initKotaro Hayashi
The ddrphy_shift_rof_hws() never writes back the shifted delay value to the register, which makes this function non-effective. Signed-off-by: Kotaro Hayashi <hayashi.kotaro@socionext.com> [masahiro: add git log] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-22ARM: uniphier: update UMC_MEMMAPSET value for LD20 SoCWataru Okoshi
Change bnk_typ's value from 8 to 0 (for G1's performance). Signed-off-by: Wataru Okoshi <okoshi.wataru@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-18ARM: uniphier: refactor spl_init_board()Masahiro Yamada
Merge init-*.c into a single file using a table of callbacks because the initialization flow is almost common among SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-12-10ARM: uniphier: remove unneeded parenthesesMasahiro Yamada
Just a cosmetic cleanup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: update DRAM init code for LD11 SoCMasahiro Yamada
Introduce run-time DDR PHY training. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: support DDR PHY parameter dump command for LD11Masahiro Yamada
Add the LD11 SoC data and adjuts the printf() format because this is a 64-bit SoC. Otherwise, 16-digits pointer addresses would break the log format. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: refactor DDR PHY parameter dump commandMasahiro Yamada
Do not hard-code the number of DX blocks because it is a different value for LD11 SoC. Move the macro NR_DATX8_PER_DDRPHY to ddrphy-training.c since it is the last user. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: rework existing DDR PHY code to reuse for LD11 SoCMasahiro Yamada
The DDR PHY register view of LD11 is slightly different from that of LD4/Pro4/sLD8, but it will be possible to share the register macros (and I want to re-use as much code as possible). Change the code in the more flexible form. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: fix DRAM init poll address for LD4, Pro4, sLD8Masahiro Yamada
The status register should be polled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: rename ddrphy-ld20-regs.h to ddruqphy-regs.hMasahiro Yamada
This PHY might be used for other SoCs in the future. Avoid including the SoC name in the header name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-29ARM: uniphier: update DRAM init code for LD20 SoC (3rd)Masahiro Yamada
- Constify UMC setting data arrays - Merge data arrays *_d0 and *_d1. - Add PHY parameters for LD20 C1 board Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: update DRAM init code for LD20 SoC (2nd)Masahiro Yamada
- Do not reference CONFIG_DDR_FREQ; now the DDR frequency is passed from the uniphier_board_data structure - Constify parameter arrays - Tidy up cluttered macros - Lots of code cleanups - Lots of coding style fixes Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-19ARM: uniphier: update DRAM init code for LD20 SoCMasahiro Yamada
Import the latest version from the Diag software. - Support LD21 SoC (including DDR chips in the package) - Per-board granule adjustment for both reference and TV boards - Misc cleanups Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-26treewide: fix "followings" to "following"Masahiro Yamada
Most of them are my mistakes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24ARM: uniphier: introduce flags to uniphier_board_data structureMasahiro Yamada
I need to add more board attributes, so the "flags" member will be handier than separate boolean ones. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-24ARM: uniphier: use (devm_)ioremap() instead of map_sysmem()Masahiro Yamada
This does not have much impact on behavior, but makes code look more more like Linux. The use of devm_ioremap() often helps to delete .remove callbacks entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26ARM: uniphier: add PH1-LD11 SoC supportMasahiro Yamada
This is a low-cost ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26ARM: uniphier: rename UMC register macros of PH1-LD20Masahiro Yamada
Correct some register names. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-05-26ARM: uniphier: rename umc-ld20-regs.h to umc64-regs.hMasahiro Yamada
This header will be shared between PH1-LD11 and PH1-LD20 (and hopefully new ARMv8 SoCs developed in the future), so umc64-regs.h would be a better fit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-24ARM: uniphier: add PH1-LD20 SoC supportMasahiro Yamada
This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01ARM: uniphier: rename function names ph1_* to uniphier_*Masahiro Yamada
Eliminate the "ph1"_ prefixes from function names because "uniphier_" describes the SoC familiy better. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24ARM: uniphier: drop ifdef in ddrphy-regs.hMasahiro Yamada
The ifdef conditionals in header files prevent us from multi-SoC support in a single U-Boot image. Detect SoC specific parameters run-time rather than define them statically with an ifdef in ddrphy-regs.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24ARM: uniphier: drop PH1- prefix from CONFIG options and file namesMasahiro Yamada
The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-09ARM: uniphier: fix build error when CONFIG_CMD_DDRMPHY_DUMP=yMasahiro Yamada
The build fails if compiled with CONFIG_CMD_DDRMPHY_DUMP=y since commit 46abfcc99e04 ("ARM: uniphier: rework struct uniphier_board_data"). Fixes: 46abfcc99e04 ("ARM: uniphier: rework struct uniphier_board_data") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: rename variable for DRAM controller base addressMasahiro Yamada
Rename the variable that contains the base address for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: deprecate umc_dram_init_{start, poll}Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: remove unused macros for UMC base addressesMasahiro Yamada
These macros are no longer used. These base addresses are SoC-dependent, so they should not be placed in the header. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: rework DRAM size handling in UMC init codeMasahiro Yamada
Currently, DRAM size is converted twice: size in byte -> size in Gbit -> enum Optimize the code by converting the "size in byte" into enum directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: optimize PH1-Pro4 UMC init code with "for" loopMasahiro Yamada
Now this code can be re-written with a "for" statement instead of calling the same function multiple times. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: optimize PH1-LD4 UMC init code with "for" loopMasahiro Yamada
Now this code can be re-written with a "for" statement instead of calling the same function multiple times. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: optimize PH1-sLD8 UMC init code with "for" loopMasahiro Yamada
Now this code can be re-written with a "for" statement instead of calling the same function multiple times. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: refactor UMC init code for PH1-LD4Masahiro Yamada
Move frequency-dependent register settings to arrays for clean-up. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: support more DRAM use cases for PH1-sLD8Masahiro Yamada
Support DDR3-1600 / 512MB DDR size. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: refactor UMC init code for PH1-sLD8Masahiro Yamada
Move frequency-dependent register settings to arrays for clean-up. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: refactor DDR-PHY init codeMasahiro Yamada
The if-else statements for the frequency-dependent register settings seem clumsy. Moving them to arrays would make it cleaner. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: remove unused argument of ph1_ld4_ddrphy_init()Masahiro Yamada
The DDR PHY settings no longer depend on the DRAM size. Drop the argument from the init function. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29ARM: uniphier: merge DDR PHY init code for 3 SoCsMasahiro Yamada
Now these three are almost the same. The only difference is the DTPR1 register dependency on the DRAM size, but it can be ignored. (It has already been ignored in PH1-sLD8 and PH1-Pro4.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit (git 2.34.1) at 2024-12-27 09:54:26 +0000