summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2016-10-26arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/SoloJagan Teki
i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: imx6dl: Add pinctrl definesJagan Teki
Add imx6dl pinctrl defines support from Linux. Here is the last commit: "ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ" (sha1: d8c765e0d1ddbd5032c2491c82cc9660c2f0e7f2) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: Add devicetree for i.MX6DQLJagan Teki
Add i.MX6DQL dtsi support from Linux. Here is the last commit: "ARM: dts: imx6qdl: Fix SPDIF regression" (sha1: f065e9e4addd75c21bb976bb2558648bf4f61de6) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: dts: Add devicetree for i.MX6DLJagan Teki
Add i.MX6DL dtsi support from Linux. Here is the last commit: "ARM: dts: add gpio-ranges property to iMX GPIO controllers" (sha1: bb728d662bed0fe91b152550e640cb3f6caa972c) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-26arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial supportJagan Teki
Boot Log for i.CoreM6 DualLite/Solo Starter Kit: ----------------------------------------------- U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46) Trying to boot from MMC1 U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530) CPU: Freescale i.MX6SOLO rev1.3 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 31C Reset cause: POR DRAM: 256 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device switch to partitions #0, OK mmc0 is current device reading boot.scr ** Unable to read file boot.scr ** reading zImage 6741808 bytes read in 341 ms (18.9 MiB/s) Booting from mmc ... reading imx6dl-icore.dtb 30600 bytes read in 19 ms (1.5 MiB/s) Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800a787 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 Boot Log for i.CoreM6 Quad/Dual Starter Kit: -------------------------------------------- U-Boot SPL 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46) Trying to boot from MMC1 U-Boot 2016.09-rc2-30739-gd1fa290 (Sep 17 2016 - 00:37:46 +0530) CPU: Freescale i.MX6Q rev1.2 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 28C Reset cause: POR DRAM: 512 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 icorem6qdl> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2016-10-24imx-common: compile plugin codePeng Fan
If CONFIG_USE_IMXIMG_PLUGIN is selected, plugin.bin will be generated under board/$(BOARDDIR)/. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24imx-common: introduce USE_IMXIMG_PLUGIN KconfigPeng Fan
Introduce USE_IMXIMG_PLUGIN Kconfig Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24imx: mx7: Add plugin supportPeng Fan
Add mx7_plugin.S which calls boot rom setup function, generate the second ivt, and jump back to boot rom. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-24imx: mx6: Add plugin supportPeng Fan
Add mx6_plugin.S which calls boot rom setup function, generate the second ivt, and jump back to boot rom. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Utkarsh Gupta <utkarsh.gupta@nxp.com>
2016-10-17arm: imx-common: introduce back usec2ticksPeng Fan
This commit "2bb014820c49a63902103bac710bc86b5772e843" do some clean up to use the code in lib/time.c. But usec2ticks is still being used by security related job ring code. Bring back the function to avoid build break when CONFIG_FSL_CAAM is defined. The computation logic has been changed, using 64-bit variable to ease the process, making it work on older (MX5) platforms. Signed-off-by: Peng Fan <van.freenix@gmail.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2016-10-17arm: imx-common: add SECURE_BOOT option to KconfigGary Bisson
So the option can easily be selected through menuconfig. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2016-10-14ARM: create .secure_stack section only for PSCIMasahiro Yamada
Jon Master reports that QEMU refuses to load a U-Boot image built with CONFIG_ARMV7_NONSEC, but without CONFIG_ARMV7_PSCI since commit 5a3aae68c74e ("ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI"). It looks like only PSCI that needs the Secure stack, so move the #ifdef to guard the whole of .secure_stack allocation in order not to create the empty section. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reported-by: Jon Masters <jcm@redhat.com> Link: http://patchwork.ozlabs.org/patch/664025/
2016-10-13libfdt: Sync fdt_for_each_subnode() with upstreamSimon Glass
The signature for this macro has changed. Bring in the upstream version and adjust U-Boot's usages to suit. Signed-off-by: Simon Glass <sjg@chromium.org> Update to drivers/power/pmic/palmas.c: Signed-off-by: Keerthy <j-keerthy@ti.com> Change-Id: I6cc9021339bfe686f9df21d61a1095ca2b3776e8
2016-10-13libfdt: Bring in upstream stringlist functionsSimon Glass
These have now landed upstream. The naming is different and in one case the function signature has changed. Update the code to match. This applies the following upstream commits by Thierry Reding <treding@nvidia.com> : 604e61e fdt: Add functions to retrieve strings 8702bd1 fdt: Add a function to get the index of a string 2218387 fdt: Add a function to count strings Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-12Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2016-10-12Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-10-12Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-10-12Merge git://www.denx.de/git/u-boot-marvellTom Rini
2016-10-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/ls1021aqds.h include/configs/ls1021atwr.h
2016-10-10ARM: tegra: reduce DRAM size mapped into MMU on ARM64Stephen Warren
ARM CPUs can architecturally (speculatively) prefetch completely arbitrary normal memory locations, as defined by the current translation tables. The current MMU configuration for 64-bit Tegras maps an extremely large range of addresses as DRAM, well beyond the actual physical maximum DRAM window, even though U-Boot only needs access to the first 2GB of DRAM; the Tegra port of U-Boot deliberately limits itself to 2GB of RAM since some HW modules on at least some 64-bit Tegra SoCs can only access a 32-bit physical address space. This change reduces the amount of RAM mapped via the MMU to disallow the CPU from ever speculatively accessing RAM that U-Boot will definitely not access. This avoids the possibility of the HW raising SError due to accesses to always-invalid physical addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10colibri_t20: fix usb operation and controller orderMarcel Ziswiler
Without this patch the following error will be shown: Colibri T20 # usb start starting USB... No controllers found This patch fixes USB operation and also the controller order as the CI UDC driver may only be instantiated on the first aka OTG port. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10colibri_t20: fix display configurationMarcel Ziswiler
Without this patch the following error will be shown: stdio_add_devices: Video device failed (ret=-22) As commit ec5507707a1d1e84056a6c864338f95f6118d3ca (video: tegra: Move to using simple-panel and pwm-backlight) states the Colibri T20 needs updating too which this patch finally attempts doing. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-10-10sunxi: Fix H3 DRAM impedance calibration on rev. A chipsJens Kuske
H3 seems to have a silicon bug breaking the impedance calibration. This is currently worked around in software by multiple steps combining the results to replace the wrong values. Revision A chips need a different workaround, which is present in the vendor bootloader too, but got overlooked in lack of information and affected boards till now. This commit adds a simplified version without correction factor, which would be 1.00 for all known boards anyway. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-10reset: uniphier: add reset controller driver for UniPhier SoCsMasahiro Yamada
This is the initial commit for UniPhier reset controller driver. Most code was ported from Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: insert udelay() just before support_card_reset_deassert()Masahiro Yamada
As for LD11/LD20, we can no longer rely on the udelay() in the PLL init functions. udelay(200) is needed here to keep the ethernet device in the reset state for enough time. Anyway, 200 usec is quite short for humans, so nobody cares it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: add work-around for VBO noise problemMasahiro Yamada
Raise the VDD09 voltage line to 1.0V to suppress VBO noise. This errata work-around code is needed only for ES1. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: update DRAM init code for LD20 SoC (2nd)Masahiro Yamada
- Do not reference CONFIG_DDR_FREQ; now the DDR frequency is passed from the uniphier_board_data structure - Constify parameter arrays - Tidy up cluttered macros - Lots of code cleanups - Lots of coding style fixes Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: enable SSC for DPLL (DRAM PLL) on LD11 SoCMasahiro Yamada
For Electro-Magnetic Compatibility test. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-10ARM: uniphier: do not setup pins for System Bus on NAND boot modeMasahiro Yamada
For LD11 and LD20 SoCs, the System Bus and NAND are multiplexed in the same I/O pins. When booting from a NAND device, pin-mux for the System Bus must not be set-up because they are exclusive with each other. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-10-09arm: kirkwood: add support for Synology DS109 boardWalter Schweizer
Synology DS109 is based on MV88F6281. The code is based on Dreamplug code with modificatons from Synologys open source repository. Signed-off-by: Walter Schweizer <swwa@users.sourceforge.net> Signed-off-by: Stefan Roese <sr@denx.de>
2016-10-08Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-10-08ARM: AM437X: Add Silicon ID supportLokesh Vutla
Add silicon ID code for AM437x silicon. This can be used to print the cpu info using CONFIG_DISPLAY_CPUINFO. Also printing "CPU :" along with cpu name in order to be consistent with other OMAP platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-10-08ARM: dts: dra72: add rev C evm supportMugunthan V N
Add DTS support for dra72 evm Rev C which has the following changes * Two ethernet ports now instead of the single one in rev B. * DP83867 ethernet phy instead of DP838865. Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08arm: Add return value argument to longjmpAlexander Graf
The normal longjmp command allows for a caller to pass the return value of the setjmp() invocation. This patch adds that semantic to the arm implementation of it and adjusts the efi_loader call respectively. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-08ARM: keystone: rename clk_get_rate() to ks_clk_get_rate()Masahiro Yamada
The KeyStone platform has its own clk_get_rate() but its prototype is different from that of the common-clk (clk-uclass) framework. Prefix the KeyStone specific implementation with ks_ in order to avoid name-space conflict. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-07armv8: ls2080a: Add USB node in dts for ls2080aSriram Dash
Add the USB node for LS2080a in dts. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> [York Sun: replace ls2080 with ls2080a in commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2016-10-07ARM: keystone: remove declaration of unused functionsMasahiro Yamada
These two functions are neither defined nor referenced. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-07ARM: vf610: use strcpy for soc environment variableStefan Agner
To create the soc environment variable we concatenate two strings on the stack. So far, strcat has been used for the first string as well as for the second string. Since the variable on the stack is not initialized, the first strcat may not start using the first entry in the character array. This then could lead to an buffer overflow on the stack. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2016-10-07arm: dts: imx7: add Ricoh RN5T567 PMIC nodeStefan Agner
Add device tree node for Ricoh RN5T567. Currently we do not need the individual DC/DC converters or LDO's (and they are also not yet supported by the driver). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-07arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device treeStefan Agner
Add base device for NXP i.MX 7Solo/7Dual. The two SoC are very similar and hence can share the same device tree for boot loaders purpose. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-07arm: dts: imx7: add pinctrl definesStefan Agner
Add pinctrl defines for NXP i.MX 7Solo/7Dual SoC. The pinctrl format is compatible to the Linux kernel, hence this file is a simple copy from the Linux kernel (commit 97f5c1817b7e). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-10-06ARM: Add register defines for am33xx ePWM registerstomas.melin@vaisala.com
Register definitions needed for configuring the ePWM module. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
2016-10-06ARM: OMAP5+: Override switch_to_hypervisor functionKeerthy
Override the switch_to_hypervisor function to switch cpu to hypervisor mode using the available ROM code hook early in the boot phase before the boot loader checks for HYP mode. Based on the work done by Jonathan Bergsagel jbergsagel@ti.com. Cc: beagleboard-x15@googlegroups.com Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06ARM: Introduce function to switch to hypervisor modeKeerthy
On some of the SoCs one cannot enable hypervisor mode directly from the u-boot because the ROM code puts the chip to supervisor mode after it jumps to boot loader. Hence introduce a weak function which can be overridden based on the SoC type and switch to hypervisor mode in a custom way. Cc: beagleboard-x15@googlegroups.com Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06omap: Set appropriate cache configuration for LPAE and non-LAPE casesKeerthy
Cache configuration methods is different for LPAE and non-LPAE cases. Hence the bits and the interpretaion is different for two cases. In case of non-LPAE mode short descriptor format is used and we need to set Cache and Buffer bits. In the case of LPAE the cache configuration happens via MAIR0 lookup. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06omap: Remove hardcoding of mmu section shift to 20Keerthy
As of now the mmu section shift is hardcoded to 20 but with LPAE coming into picture this can be different. Hence replacing 20 with MMU_SECTION_SHIFT macro. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06ARM64: Add support for some of atomic64 operationsAdam Oleksy
These functions are needed in UBI/UBIFS on ZynqMP platform (ARM64). Signed-off-by: Adam Oleksy <adam.oleksy@nokia.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2016-10-06Various, accumulated typos collected from around the tree.Robert P. J. Day
Fix various misspellings of: * deprecated * partition * preceding,preceded * preparation * its versus it's * export * existing * scenario * redundant * remaining * value * architecture Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Stefan Roese <sr@denx.de>
2016-10-06ARMv8/sec-firmware: fix a compile errorHou Zhiqiang
When enabled sec firmware framework, but lack of definition of the marco SEC_FIRMWARE_FIT_IMAGE, SEC_FIRMEWARE_FIT_CNF_NAME and SEC_FIRMWARE_TARGET_EL, there will be some build errors, so give a default definition. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2016-10-06ARM: Respect CONFIG_SPL_STACK define in lowlevel_init.SSiarhei Siamashka
The SPL and U-Boot proper may use different initial stack locations, which are configured via CONFIG_SPL_STACK and CONFIG_SYS_INIT_SP_ADDR defines. The lowlevel_init.S code needs to handle this in the same way as crt0.S Without this fix, setting the U-Boot stack location to some place, which is not safely accessible by the SPL (such as the DRAM), causes a very early SPL deadlock. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-28 17:48:59 +0000