summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2017-05-12armv7m: correct mpu region size define for 8MB sizeVikas Manocha
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12arvm7m: add cleanup before linux bootingVikas Manocha
Data cache memory needs to be disabled before handing over control to linux kernel. This patch populates the cleanup_before_linux stub. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-12armv7m: cache: add flush & invalidate all dcacheVikas Manocha
Add functionality to flush & invalidate all the dcache using the prototype declared in common header file. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Add dummy functions for the not-enabled case] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-11arm: am335x: Enable tiny printf in SPLLokesh Vutla
am335x_evm SPL is very close to its limit in SRAM space. Switch to use tiny printf to reclaim some size. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-11configs: am335x_evm: Enable SPL_DMLokesh Vutla
Enable SPL_DM on all AM335x based TI platforms. http://patchwork.ozlabs.org/patch/751300/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-11configs: am335x_evm: Use omap2 generic spl load scriptLokesh Vutla
No reason to use a separate load script for am33xx than using omap-common load script. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-11dm: mmc: omap_hsmmc: Update to support of-platdataLokesh Vutla
This is to aid platforms that uses OF_PLATDATA. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-11spl: fdt: support for fdt fixup for falcon bootB, Ravi
Adding support for fdt fixup to update the memory node in device tree for falcon boot. This is needed for single stage or falcon bootmode, to pass memory configuration to kernel through DT memory node. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-05-11arch: arm: omap: Declare size of ddr very earlyLokesh Vutla
Declare the size of ddr very early in spl, so that this can be used to enable cache. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com>
2017-05-11arm: Support cache invalidateSimon Glass
At present there is not operation to invalidate a cache range. This seems to be needed to fill out the cache operations. Add an implementation based on the flush operation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-11arm: Correct signature for get_ticks()Simon Glass
This should be uint64_t to match its definition in common.h. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-10Merge git://git.denx.de/u-boot-rockchipTom Rini
This adds a new firefly-rk3399 board, MIPI support for rk3399 and rk3288, rk818 pmic support, mkimage improvements for rockchip and a few other things.
2017-05-10Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2017-05-10rockchip: dts: evb_rk3288: Add mipi display supportEric Gao
Add mipi dsi configuration for evb-rk3288 device tree. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: rk3288: grf: Add grf define for mipi dsiEric Gao
Add grf register define for rk3288 mipi dsi Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: Add mipi dsi support for rk3399Eric Gao
Add dts config for mipi display, include vop, mipi controller, panel, backlight . And Enable rk808 for lcd_3v3 in another patch. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-05-10rockchip: video: vop: Add mipi display mode for rk3399Eric Gao
Add mipi display mode for rk3399 vop, so that we can use mipi panel for display. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: video: Add mipi driver support for rockchip socEric Gao
Add basic driver for mipi display on rockchip soc platform. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: include: grf: Add GRF register declaration for mipi dsiEric Gao
Add GRF register declaration for mipi dsi. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-05-10power: rk808: rename to rk8xxJacob Chen
Since this driver can be used for rk8xx series pmic, let's rename rk808 to rk8xx, to make it clear. Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./` Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
2017-05-10rockchip: tinker: set ethaddr in late initJonas Karlman
Set ethernet mac address in late init for Tinker Board, prevents getting a random mac address each boot. Read mac address from eeprom, first 6 bytes from m24c08@50. Same as /etc/init.d/rockchip.sh on Tinker OS. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: pinctrl: rk3399: add support for the HDMI I2C pinsPhilipp Tomsich
To add HDMI support for the RK3399, this commit provides the needed pinctrl functionality to configure the HDMI I2C pins (used for reading the screen's EDID). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: add rk3399-firefly dtsKever Yang
Firefly-rk3399 is a bord from T-Firefly, you can find detail about it here: http://en.t-firefly.com/en/firenow/Firefly_RK3399/ This patch add basic node for the board and make it able to bring up. Peripheral/interfaces on board: - usb hub which connect to ehci controller; - UART2 debug - eMMC - PCIe - USB 3.0 HOST, type-C port - sdio, sd-card - HDMI - Ethernet - OPTICAL - WiFi/BT - MIPI CSI/DSI - IR - EDP/DP Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: rk3399: sync with kernel dtsKever Yang
The kernel dts has update a lot since the first time we commit rk3399.dtsi, sync with kernel for further development. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: reserve memory for rk3399 ATF dataKever Yang
There are 3 regions used by rk3399 ATF: - bl31 code, located at 0x10000; - cortex-m0 code and data, located at 0xff8c0000; - bl31 data, located at 0xff8c1000 ~ 0xff8c4000; SPL_TEXT_BASE starts from 0xff8c2000, we need to reserve memory for ATF data, or else there will be memory corrupt after SPL loads the ATF image. More detail about cortex-M0 code in ATF: https://github.com/ARM-software/arm-trusted-firmware/commit/ 8382e17c4c6bffd15119dfce1ee4372e3c1a7890 Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: pinctrl: rk3399: add gmac io strength supportKever Yang
GMAC controller need to init the tx io driver strength to 13mA, just like the description in dts pinctrl node, or else the controller may only work in 100MHz Mode, and fail to work at 1000MHz mode. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com <mailto:philipp.tomsich@theobroma-systems.com>> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: evb-rk3399: add gmac supportKever Yang
Enable gmac for evb-rk3399. Change-Id: I85e35667e08e22e38577e63eb0e65731fc9c69b6 Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2017-05-10rockchip: rk3399: use actual dram sizeKever Yang
Since our sdram driver is ready, we can use the actual size instead of hard code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: enable debug uartEddie Cai
enable debug uart for rk3288 and print something to let people know where we are Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: evb-rk3399: correct pwm3 polarityKever Yang
The pwm3 on evb-rk3399 is used for pwm regulator, need to invert the polarity to make it work correctly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: rk3399-puma: Add DDR3-1600 timings and use for PumaPhilipp Tomsich
With the validation done for DDR3-1600 (i.e. 800 MHz bus clock), we add the timings (rk3399-sdram-ddr3-1600.dtsi) and change rk3399-puma.dts to use these by default. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org> Drop blank line at end of file: Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: dts: Clean up graffiti in rk3399-sdram-ddr3-1333.dtsiPhilipp Tomsich
The DDR3-1333 timings for the RK3399-Q7 (Puma) has some unintended left-over comments in them. This change cleans the file up. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: pinctrl: rk3399: add support for the SPI5 controllerPhilipp Tomsich
This commit adds support for the pin-configuration of the SPI5 controller of the RK3399 through the following changes: * grf_rk3399.h: adds definition for configuring the SPI5 pins in the GPIO2C group * periph.h: defines PERIPH_ID_SPI3 through PERIPH_ID_SPI5 * pinctrl_rk3399.c: adds the reverse-mapping from the IRQ# to PERIPH_ID_SPI5; dispatches PERIPH_ID_SPI3 through SPI5 to the appropriate pin-config function; implements the pin-configuration for PERIPH_ID_SPI5 using the GPIO2C group X-AffectedPlatforms: RK3399-Q7 Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-05-10rockchip: rk3399: correct memory regionKever Yang
RK3399 device memory region is 0xf8000000~0xffffffff. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10u-boot.elf: remove hard-coded arm64 flagsÁlvaro Fernández Rojas
This is needed in order to allow building it for other archs. Move relocation comment to a better place. Remove no longer needed dts FIXME. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-09power: twl4030: Move CONFIG_TWL4030_POWER to KconfigAdam Ford
As requested, I added the CONFIG_TWL4030_POWER to Kconfig and made it the implied default when selecting OMAP34XX as a platform. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09omap3_logic: Add Device Tree Support and more DM driversAdam Ford
This patch also removes all the excessive code for NS16550 intiailization as the device tree can do that now. This also adds DM_I2C and DM_MMC since the overlying drivers have the built-in support already. The corresponding include/config/omap3_logic.h also reduced in size due to the new device tree support. Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Retain Auto-detect ability between SOM-LV and Torpedo Split this off from the device sub submissions
2017-05-09ARM: DTS: Add Logic PD DM3730 Torpedo Device TreeAdam Ford
Previous commit has this combined with SOM-LV. This commit has only the Torpedo Device Tree. The device trees were sync'd with 4.9.y stable with two changes: disable mmc2 and stdout-path = &uart1. Both of those two changes will be submitted to the linux-omap list Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Split device tree from other board
2017-05-09ARM: DTS: Add Logic PD DM3730 SOM-LV initial supportAdam Ford
This adds the device tree. Previous commit added both boards at the same time. Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Split the SOM-LV from Torpedo
2017-05-09OMAP3: Add SMSC9221 device tree for omap devices connected on GPMC.Adam Ford
Some OMAP3 devices support an SMSC ethernet PHY connected to the GPMC bus. This copies this device tree from Linux 4.9.y stable Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-09omap3: Copy twl4030 device tree from Linux 4.9.y stableAdam Ford
Many OMAP3 boards use a TWL4030 PMIC. This brings in the related device tree information for common TWL4030 and TWL4030 with OMAP3. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-09omap3630: Copy Device tree from Linux 4.9.y stableAdam Ford
Add device tree support to allow for CONFIG_OF_CONTROL in OMAP3630 boards. DM3730 can use this same device tree. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-09omap3: Copy Device tree from Linux 4.9.y stableAdam Ford
Add device tree support to allow for CONFIG_OF_CONTROL in OMAP3 boards. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-05-09omap_hsmmc: update struct hsmmc to accommodate omap3 from DTAdam Ford
This patch changes the way DM_MMC calculates offset to the base register of MMC. Previously this was through an #ifdef but that wasn't necessary for OMAP3. This patch will now add in the offset to the base address based on the .compatible flags. Signed-off-by: Adam Ford <aford173@gmail.com> V2: Remove ifdef completely and reference offset from the omap_hsmmc_ids table. V1: Change ifdef to ignore OMAP3 Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-09bcm2835_wdt: support for the BCM2835/2836 watchdogPaolo Pisati
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
2017-05-09video: arm: rpi: Move the video settings out of the driverSimon Glass
Add a function to set the video parameters to the msg handler and remove it from the video driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-09video: arm: rpi: Move the video query out of the driverSimon Glass
Add a function to get the video size to the msg handler and remove it from the video driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2017-05-09arm: rpi: Add a function to obtain the MMC clockSimon Glass
Move this code into the new message handler file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-09arm: rpi: Add a file to handle messagesSimon Glass
The bcm283x chips provide a way for the ARM core to communicate with the graphics processor, which is in charge of many things. This is handled by way of a message prototcol. At present the code for sending message (and receiving a reply) is spread around U-Boot, primarily in the board file. This means that sending a message from a driver requires duplicating the code. Create a new message implementation with a function to support powering on a subsystem as a starting point. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-09arm: rpi: Drop the GPIO device addressesSimon Glass
We can rely on the device tree to provide this information. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-08 21:47:50 +0000