summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-10-25configs: sopine-baseboard: Enable SPI-FLASHJagan Teki
SoPine has winbond SPI-FLASH, so enable the same in defconfig and add aliases for spi0 in -u-boot.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25arm: sunxi: Enable SPI/SPI-FLASH support for A64Jagan Teki
SPI is available in Allwinner A64 SoC, so enable it globally in Kconfig. - CONFIG_SPI - CONFIG_DM_SPI - CONFIG_DM_SPI_FLASH Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-24Merge branch '2019-10-24-UFS-support'Tom Rini
- Add Universal Flash Storage (UFS) support
2019-10-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add support for HyperBus Memory Controller of TI's J721e and AM654 SoCs (Vignesh)
2019-10-24arm: dts: k3-j721e-som-p0: Add HyperFlash nodeVignesh Raghavendra
J721e SoM as a 64MB HyperFlash on board. Add pinmux and DT node for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller nodeVignesh Raghavendra
Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not possible to use OSPI0 and HBMC simultaneously as they are muxed within the Flash Subsystem hence disable HBMC by default as keep OSPI enabled. Bootloader will fixup DT when it detects HyperFlash instead of OSPI. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23arm: dts: k3-j721e-main: Add UFS nodesFaiz Abbas
Add TI UFS glue layer and Cadence UFS Host controller DT nodes. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-21armv7: ls102xa: Don't power down OCRAM1 during deep sleepBiwen Li
To allow OCRAM to be used as wakeup source in deep sleep, do not power it down. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: add errata ID A-008646 for workaroundBiwen Li
The patch adds an errata ID A-008646 for workaround to provide more information by errata ID. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: Update LX2160A/LX2120A/LX2080A SVR valueWasim Khan
LX2160A/LX2120A/LX2080A SVR value should be 0x873600/0x873620/0x873602 Previous values were valid only if CAN fuse is blown. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: disable multimedia for ls1027a, ls1017aYuantian Tang
ls1028a has 4 personalities: ls1028a, ls1027a, ls1017a and ls1018a. Both ls1027a and ls1017a personalities are lower functionality version which doesn't support the multimedia subsystems, like LCD, GPU. To disable multimedia feature on non-multimedia version, set the status property to disabled in dts nodes. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Correct endianness of SCFG_SPARECR8 readBiwen Li
The patch corrects endianness of register SCFG_SPARECR8 read in_le32 -> in_be32 Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: fsl-layerscape: Make USB masters snoopableRan Wang
Program register bit of SCFG_SNPCNFGCR_USBxRDSNP and SCFG_SNPCNFGCR_USBxWRSNP(x = 1, 2, 3) to drive USBx read/write snoop signal on LS1043A and LS1046A. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv7: ls102xa: Update SCFG_QSPI_CLKSEL valueKuldeep Singh
Update SCFG_QSPI_CLKSEL value : 0xC -> 0x5 which means ClusterPLL/16 Signed-off-by: Ashish Kumar <Ashish.kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-21armv8: ls1028a: Add more personalities supportYuantian Tang
Add LS1027A, LS1018A and LS1017A personalities support to LS1028A SoC family. LS1028A is the prime personality of LS1028A SoC family. LS1027A is a lower funtionality version of QorIQ LS1028A which does not support the multimedia subsystems, such as LCD controller, GPU, and eDP PHY. The QorIQ LS1018A and LS1017A SoCs are single 64-bit Arm A72 core, low power versions of the QorIQ LS1028A and LS1027A SoCs respectively. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-10-18ARM: dts: meson-sm1: add U-Boot specific DT for graphicsNeil Armstrong
Rename meson-g12a-u-boot.dtsi into meson-g12-common-u-boot.dtsi to match the new DT architecture and add meson-sm1-sei610-u-boot.dtsi to handle the U-Boot specific DT for graphics. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: Import SEI610 DT from Linux 5.4-rc2Neil Armstrong
Import the Amlogic SM1 DT and the SEI610 board DT from [1] [1] da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: meson: add SM1 SoC idNeil Armstrong
Add the missing IDs to detect the SM1 S905X3 SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Recognize A311D SoCAndreas Färber
Values imported from Linux driver, but in correct numeric order. Khadas VIM3 prints: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Cc: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Tidy SoC information outputAndreas Färber
Write SoC instead of Soc. The Linux driver is not affected. Fixes: f41d723b9f ("ARM: meson: display Amlogic SoC Information") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: dts: Import and update DT for Khadas VIM3Andreas Färber
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts. Copied from da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: meson-g12a: add U-Boot specific DT for graphicsNeil Armstrong
Like the meson-gx support, add the U-Boot specific bits in DT to support graphics on G12A SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18arm: meson: board-g12a: Setup VPU in fdtNeil Armstrong
If VIDEO_MESON is enabled, we need to setup the fdt for the framebuffer. Call meson_vpu_rsv_fb() which reserves the framebuffer memory region for EFI, and sets up simple-framebuffer nodes if simplefb support is enabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-16arm: remove the H2200 boardHeinrich Schuchardt
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- vining_fpga updates
2019-10-14Merge tag 'u-boot-imx-20191014' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191014 ------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628 - logicpd pinmux - i.MX7ULP: imx_ddr_size - fixes Toradex i.MX6/i.MX7 - pico-imx7d - tpc70 converted to DM - New Board: meerkat96 - add HAB version command - i.MX8 : imx8: Jump from alias to OCRAM address at SPL init imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14Merge tag 'video-for-2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - panel bridge support in stm32 ltdc - DSI host uclass - sandbox DSI host uclass test driver and DSI host test - MIPI DSI helpers - Synopsys Designware MIPI DSI host bridge driver - STM32 DSI controller driver - OTM800A and RM68200 panel support - DSI host updates for stm32f769 and stm32mp1 dtsi files - splash screen for stm32f769 and stm32mp1 boards - stm32 defconfig updates for display support
2019-10-14Merge tag 'mmc-10-10-2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - Add sdhci driver for Broadcom iProc platform - Add a driver callback for power-cycle for mmc - Implement host_power_cycle callback for stm32_sdmmc2 - spl: dm_mmc: Initialize only the required mmc device
2019-10-14imx :hab: Add hab version commandSjoerd Simons
THe RVT data includes a major and minor version in its header parameter. Add a new command to print this out. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-14imx: mmdc_size: Allow building it for i.MX7ULPFabio Estevam
i.MX7ULP uses the same MMDC controller IP as found on i.MX53 and i.MX6, so build mmdc_size.c for i.MX7ULP as well. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-14imx: mmdc_size: Fix checkpatch warningsFabio Estevam
The original imx_ddr_size() implementation had some issues reported by checkpatch like this: CHECK: Prefer kernel type 'u32' over 'uint32_t' #127: FILE: arch/arm/mach-imx/mmdc_size.c:16: + uint32_t ctl; WARNING: Prefer 'unsigned int' to bare use of 'unsigned' #151: FILE: arch/arm/mach-imx/mmdc_size.c:40: + unsigned ctl = readl(&mem->ctl); Fix all of them. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-14imx: Place imx_ddr_size() into a separate fileFabio Estevam
Place imx_ddr_size() into a separate file. The motivation for doing this is to be able to easily reuse imx_ddr_size() on i.MX7ULP. Currently imx_ddr_size() is inside arch/arm/mach-imx/cpu.c, which is not built for i.MX7ULP. Changing the logic to allow building cpu.c for i.MX7UP would require adding several ifdef's, leading to a not a very elegant solution. To allow better reuse, just place imx_ddr_size() into a common mmdc_size.c file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-13ARM: dts: stm32mp1: add dsi host for stm32mp157c-dk2 boardYannick Fertré
The new class dsi host allows the management of the bridge DPI to DSI. This bridge is embedded in the chipset mp1 (come from synopsys company). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13ARM: dts: stm32mp1: add dsi host for stm32mp157c-ev1 boardYannick Fertré
The new class dsi host allows the management of the bridge DPI to DSI. This bridge is embedded in the chipset mp1 (come from synopsys company). Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13ARM: dts: stm32f769: add display for STM32F769 disco boardYannick Fertré
Enable the display controller, mipi dsi bridge & panel. Set panel display timings. Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13imx8: Jump from alias to OCRAM address at SPL initYe Li
When running SPL on iMX8, the A core starts at address 0 which is a alias to OCRAM 0x100000. The alias only map first 96KB of OCRAM, so this require the SPL size can't beyond 96KB. But when using SPL DM, the size increase significantly and may exceed 96KB. So to fix the problem, we will change SPL linker address to OCRAM address 0x100000. And then jump to the absolute address not the PC relative address for entering OCRAM. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-10-13imx: tpc70: Convert TPC70 (imx6q) board to use DM/DTS in SPL and u-bootLukasz Majewski
This patch converts the TPC70 to use driver model and device tree description in both SPL and u-boot proper. Notable changes (DM/DTS conversion): - PINCTRL{_IMX6} - DM_I2C - enable 'regulator' and 'pmic' commands - DM_MMC and BLK (USDHC) - DM_ETH - DM WDT (including SYSRESET) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: dts: Add u-boot specific set of device tree properties for tpc70Lukasz Majewski
This commit adds new file - imx6q-kp-u-boot.dtsi with a set of u-boot specific properties for imx6q KP device. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13imx: tpc70: dts: Add TPC70 board (imx6q based) device tree descriptionLukasz Majewski
This commit defines the TPC70 imx6q board with device tree description. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13ARM: imx6q_logic: Enable Pin muxing in SPLAdam Ford
With the 256KB of OCRAM available to SPL now, there should be enough room to enable the pinmuxing in SPL from the device tree. This patch enables SPL_PINCTRL et al and adds the serial and usdhc pin mux references to the -u-boot.dtsi file so the pins can be configured from the device tree. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-13ARM: dts: imx6q-tbs2910: Sync devicetree with kernel 5.3Soeren Moch
Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13Add i.MX7D based Meerkat96 board supportShawn Guo
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of 96Boards community and complies with all Consumer Edition board specifications. https://www.novtech.com/products/meerkat96.html https://www.96boards.org/product/imx7-96/ The initial supported/tested devices include: - Debug serial - SD - USB Host (with Ethernet) With these support, it's good enough for loading Linux Kernel from SD or Ethernet over USB. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-13ARM: dts: import meerkat96 board supportShawn Guo
It imports device tree source of meerkat96 board from Linux Kernel. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-10-12Merge branch '2019-10-11-master-imports'Tom Rini
- Assorted cleanups - FAT bugfixes - mediatek platform updates
2019-10-11arm64: print instructions leading to exceptionHeinrich Schuchardt
If an exception occurs in a loaded image and the relocation offset is unknown, it is helpful to know the instructions pointed to by the program counter. This patch adds the missing output. A possible output is: Code: 910c4021 aa1303e0 f9400662 d63f0040 (e7f7defb) The parentheses indicate the instruction causing the exception. The output can be disassembled using scripts/decodecode: echo 'Code: 90000360 9100b800 94002782 17ffff8f (e7f7defb)' | \ ARCH=arm64 scripts/decodecode Code: 90000360 9100b800 94002782 17ffff8f (e7f7defb) All code ======== 0: 90000360 adrp x0, 0x6c000 4: 9100b800 add x0, x0, #0x2e 8: 94002782 bl 0x9e10 c: 17ffff8f b 0xfffffffffffffe48 10:* e7f7defb .inst 0xe7f7defb ; undefined <-- trapping instruction Code starting with the faulting instruction =========================================== 0: e7f7defb .inst 0xe7f7defb ; undefined We already have implemented the same for armv7. For testing command 'exception undefined' can be used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-11ARM: asm/io.h: remove redundant #if !defined(readb) blockRasmus Villemoes
readb is unconditionally defined earlier in io.h, so there's no point checking whether it's undefined. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2019-10-11ARM: asm/io.h: kill off confusing #ifdef __mem_pci blockRasmus Villemoes
No ARM board seems to define __mem_pci - and if it did, one would get tons of ./arch/arm/include/asm/io.h:307:0: warning: "readl" redefined warnings, because readl and friends are unconditionally defined earlier in io.h. Moreover, the redefinitions lack the memory barriers that the first definitions have. So I'm guessing this is practically dead code. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2019-10-11arm: dra7xx: Hang on any failure during IOdelay recalibrationLokesh Vutla
If there is any failure during IOdelay recalibration sequence, IOs are not guaranteed to behave as expected. So hang on any failure during the sequence. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11arm: dra7xx: Fix error path in iodelay recalibrationLokesh Vutla
When an error is reported in __recalibrate_iodelay_start(), de-isolation of IO doesn't happen. Because of this, undefined behaviour is observed on many peripherals without any error. So make sure io is out of isolation at the end of iodelay recalibration. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11arm: dts: k3-j721e-common-proc-board: Mark main_uart0 as shared deviceLokesh Vutla
Main uart0 is used as debug console by both R5SPL and A72 bootloader and Linux. So mark it as shared device so that power-domain request is successful by both cores. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2025-01-01 13:56:21 +0000