summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-07-29rockchip: rk3036: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: move dram_init() into soc fileKever Yang
Move dram_init() into rk3036.c so that we can use to common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: sdram_common: add common dram_init_banksizeKever Yang
dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common board file for U-Boot properKever Yang
Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: clean up board_usb_init() for all SoCsKever Yang
Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: convert to use ROCKCHIP_BOOT_MODE_REG for fastboot tagKever Yang
The fastboot_set_reboot_flag() update a TAG into a register for next boot, use the common macro for the register so that we can re-use the function for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add board_debug_uart_init()Kever Yang
Add board_debug_uart_init() to make the debug UART work with correct setting. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common spl board fileKever Yang
rk3399 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move chromebook bob specific flow to its board fileKever Yang
Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move boot_devices into soc fileKever Yang
Move boot_devices definition into rk3399.c, so that we can share the common code for board_spl_was_booted_from(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399; move spl_board_init() into soc fileKever Yang
Move spl_board_init() into rk3399.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move SoC setting into arch_cpu_init()Kever Yang
SoC setting like DDR secure region and EMMC clock setting should go to arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move spl_perform_fixups() into soc fileKever Yang
Move the spl_perform_fixups() into rk3399.c so that we can use common spl board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: migrate to use common spl board fileKever Yang
rk3368 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: migrate to use common spl board fileKever Yang
rk3328 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"Kever Yang
"u-boot,spl-boot-order" is more flexible and other rockchip SoCs has convert to use it, migrate to use the new dts property. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: phycore: remove no use "u-boot, boot0" in dtsKever Yang
We are using "u-boot,spl-boot-order" now and re-use the definition from rk3288-u-boot.dtsi, so remove it directly here. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Migrate to use common spl board fileKever Yang
rk3288 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move dram_init_banksize() into soc fileKever Yang
Mov edram_init_banksize() into rk3288.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-phycore: move phycore_init() to its own board fileKever Yang
phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: fit_spl_optee: rockchip: fix warning unit_address_vs_regKever Yang
Update to fix warning: u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/optee@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/conf@1 has a unit name, but no reg property Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: migrate to use common spl board fileKever Yang
rk322x has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: introduce arch_cpu_init() for SoC setting initKever Yang
Use arch_cpu_init() to init SoC secure region and move it to rk322x.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: migrate to use common spl board fileKever Yang
rk3188 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: move spl_board_init() into rk3188.cKever Yang
Clean up the rk3188.c so that we can re-use the common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: Migrate to use BOOTROM_SUPPORT driverKever Yang
SPL bootrom support is a boot device just like mmc and etc, use formal boot device instead of jump to bootrom directly. Enable the Kconfig by default if ROCKCHIP_BACK_TO_BROM is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: move usb uart init into arch_cpu_init()Kever Yang
The SoC feature init will be better to use arch_cpu_init() and goes to soc file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: init CPU freq in clock driverKever Yang
Init CPU frquency in clock driver instead of in SPL board file, this will help for use common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common spl board fileKever Yang
The common spl board file handles board_init_f() in SPL, and with board_early_init_f() and arch_cpu_init() callback, other operateion after board_init_f() should go to board specific spl_board_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29ARM: dts: colibri-imx6ull: extend lcdif nodeIgor Opaniuk
Provide proper display timings for lcdif node, used by mxsfb DM_VIDEO enabled framebuffer driver. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29colibri-imx6ull: support building with DM_VIDEO=yIgor Opaniuk
1. This fixes linking issues when building with DM_VIDEO enabled mxsfb driver. 2. Provide proper defines for both VIDEO=y and DM_VIDEO=y. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri_imx7: Fix lcdif node definitionIgor Opaniuk
Fix lcdif DT node and make it conform to the structure defined in the Linux devicetree bindings [1]. Currently there is support only for old style lcdif node definitions. [1] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29ARM: dts: colibri_vf: Add dcu0 nodeIgor Opaniuk
Add dumb node for NXP Display Control Unit0(DCU), which permits DM_ENABLED converted driver to be probed. Currently no display timings are provided in this node. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-27Merge branch '2019-07-26-ti-imports'Tom Rini
- Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
2019-07-27ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTSAdam Ford
Re-sync all Logic PD OMAP35 and AM/DM37 boards with Kernel 5.2.1 Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27Merge tag 'u-boot-imx-20190719' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-26ARM: am3517-evm: Migrate to SPL_OF_CONTROLAdam Ford
Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay valuesFaiz Abbas
Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest dra76x data manual[1]. Also this particular pinctrl-array is using spaces instead of tabs for spacing between the values and the comments. Fix this as well. [1] http://www.ti.com/lit/ds/symlink/dra76p.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26ARM: dts: am57xx: Disable voltage switching for SD cardFaiz Abbas
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-evms and am57xx-idks don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2Faiz Abbas
Sync with kernel dts by adding pinmuxes for mmc1 and mmc2. This fixes an issue where mmc2 (eMMC) was coming up in HS52 mode instead of the highest DDR52 mode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullupFaiz Abbas
During a short period when the bus voltage is switched from 3.3v to 1.8v, (to enumerate UHS mode), the mmc module is disabled and the mmc IO lines are kept in a state according to the programmed pad mux pull type. According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the host should hold CLK low for at least 5ms. In order to keep the card line low during voltage switch, the pad mux of mmc1_clk line should be configured to pull down. Add a new pinctrl group for clock line without pullup to be used in boards where mmc1_clk line is not connected to an external pullup. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26arm: dts: k3-j721e: Add r5 specific dt supportLokesh Vutla
Add initial support for dt that runs on r5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
generated by cgit (git 2.34.1) at 2025-01-10 16:50:26 +0000