summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2017-09-01Convert CONFIG_SYS_I2C_BUS_MAX to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SYS_I2C_BUS_MAX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Fix AM43XX drop AM44XX] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-01Configs: Migrate I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAXAdam Ford
For consistency with other platforms and in preparation of Kconfig migration, let's change Several TI platforms that use I2C_BUS_MAX to CONFIG_SYS_I2C_BUS_MAX Signed-off-by: Adam Ford <aford173@gmail.com>
2017-09-01Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigsTom Rini
- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's not strictly part of fastboot. - Add some defaults for the fastboot buffer location and size - Migrate all options listed in cmd/fastboot/Kconfig - Cleanup the README Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-01Merge git://git.denx.de/u-boot-sunxiTom Rini
2017-09-01sunxi: Fix CONFIG_SUNXI_GMAC referencesDave Prue
SUNXI_GMAC was still used to configure the code where as the same has been renamed and moved to Kconfig in below commit "sunxi: Move SUNXI_GMAC to Kconfig" (sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb) Signed-off-by: Dave Prue <dave@prue.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org> [Tweek commit message, config_whitelist.txt, build-whitelist.sh] Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-09-01Merge git://git.denx.de/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/imx6qdl_icore_mmc_defconfig configs/imx6qdl_icore_rqs_defconfig
2017-09-01Merge git://git.denx.de/u-boot-marvellTom Rini
2017-09-01Merge git://git.denx.de/u-boot-uniphierTom Rini
- add {ofnode,dev}_read_resource_byname - provide DT probe hook to Denali NAND driver - update clk/reset driver - update DT - misc cleanups
2017-08-30i.MX6Q: spl: Fix falcon to use dram_init_banksizeJagan Teki
Memory dt node update introduced by spl_fixup_fdt() in below commit was making DDR configuration in-appropriate to boot falcon mode. Hence added dram_init_banksize for explicit assignment of proper base and size of DDR. "boot: fdt: Perform arch_fixup_fdt() on the given device tree for falcon boot" (sha1: 6e7585bb64b12f632681c80c4b193349e1985d92) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-30imx: remove SATA boot mode for i.MX 6UL and 6ULLStefan Agner
The NXP i.MX 6UL and 6ULL do not support SATA and have no SATA boot mode, hence remove it from the boot device detecion. This fixes a build error introduced with 3bd1642d4d50 ("imx: fix USB boot mode detection for i.MX 6UL and 6ULL") Fixes: 3bd1642d4d50 ("imx: fix USB boot mode detection for i.MX 6UL and 6ULL") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-08-30ARM: mvebu: add "spi-flash" compatible stringChris Packham
U-boots spi-nor support is currently considered a work in progress. For now to avoid issues it is necessary to add a "spi-flash" compatible string. Eventually the "jedec,spi-nor" will be sufficient when the core U-boot code is updated to support it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-30ARM: uniphier: set system bus pinmux for PXs3Masahiro Yamada
The system bus is not enabled by default for NAND, eMMC boot etc. of PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: uniphier: move CONFIG_NAND to defconfigMasahiro Yamada
This imply was added when the option was moved by the moveconfig tool, but the intention is not clear. Move it to defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: dts: uniphier: update PXs3 SoC/board DTMasahiro Yamada
Support PXs3 SoC and its reference development board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: dts: uniphier: sync with LinuxMasahiro Yamada
Import updates queued up for Linux 4.14-rc1. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: uniphier: fix DSPLL init code for LD20 SoCDai Okamura
Signed-off-by: Dai Okamura <okamura.dai@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: uniphier: remove ad-hoc pin settings for NANDMasahiro Yamada
This is now set up by the pinctrl driver when the NAND driver is probed. Remove the legacy code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: uniphier: add PLL settings for PXs3Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: uniphier: move PLLCTRL register macros to each SoC .c fileMasahiro Yamada
The new SoC PXs3 changed the address of PLL, but still uses the same PLL name. We can not define SC_*PLLCTRL in the common header. Move them to per-SoC .c file. Also, fix some PLL comments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30ARM: uniphier: replace <common.h> with <linux/delay.h> in pll settingsMasahiro Yamada
The #include <common.h> was added for mdelay(). Later, the declaration of mdelay was moved to <linux/delay.h> by commit 5bc516ed661a ("delay: collect {m, n, u}delay declarations to include/linux/delay.h"). There is no need to include <common.h> now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-29imx6: don't include unneeded boot_mode array in SPLAnatolij Gustschin
The soc_boot_modes array is only used by bmode command and not needed in SPL. Don't include it into SPL. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-29imx: timer: don't clear the GPT control register multiple timesAnatolij Gustschin
There is no need to clear the control register 100 times in a loop, a single zero write clears the register. I didn't find any justification why clearing this register in a loop is needed (no info in i.MX6 errata or GPT timer linux driver, linux driver uses single write to clear this control register). Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2017-08-28sunxi: Enable MMC new mode for A83TMaxime Ripard
The eMMC controller for the A83T uses the new operating mode. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-08-28mmc: sunxi: Support new modeMaxime Ripard
Almost all of the newer Allwinner SoCs have a new operating mode for the eMMC clocks that needs to be enabled in both the clock and the MMC controller. Details about that mode are sparse, and the name itself (new mode vs old mode) doesn't give much details, but it seems that the it changes the sampling of the MMC clock. One side effect is also that it divides the parent clock rate by 2. Add support for it through a Kconfig option. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-08-28imx: imx6: Move gpr_init() function to soc.cBreno Lima
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-26Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-08-26spl: stm32: make falcon mode activation configurableVikas Manocha
With this change, it will be possible to de-select falcon mode & spl will only boot U-Boot. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Suggested-by: Bo Shen <voice.shen@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-26ARMv8/sec_firmware : Update chosen/kaslr-seed with random numberRuchika Gupta
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node. sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree. Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
2017-08-26arch/arm/cpu/arm926ejs/spear/cpu.c: guard do_switch_ecc() with CONFIG_NAND_FSMCThomas Petazzoni
do_switch_ecc() calls fsmc_nand_switch_ecc(), which is a direct function call into drivers/mtd/nand/fsmc_nand.c. However, this function is not guarded by CONFIG_NAND_FSMC, which results to a build failure if CONFIG_NAND_FSMC is disabled. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-26board/spear/common: move code to arch/arm/cpu/arm926ejs/spear/Thomas Petazzoni
The code in board/spear/common/ is not board-specific but SoC-specific. Therefore, boards from other vendors than "spear" may want to re-use this code, which is currently difficult with the code being placed in board/spear/common/. Since this code really is SoC-specific, this commit moves it to arch/arm/cpu/arm926ejs/spear/, with the rest of the SPEAr related code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-08-26board: atmel: Use the new PIT timer driverWenyou.Yang@microchip.com
Use the Atmel PIT timer driver which supports the driver model and device tree. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-08-26driver: timer: Add the Atmel PIT timer driverWenyou.Yang@microchip.com
Add the new Atmel PIT timer driver, which supports the driver model and device tree. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-08-26arm: dts: am33xx: sync DTS with Linux 4.13-rc4Suniel Mahesh
This re-syncs AM33xx DTS file with current file from Linux v4.13-rc4 to ensure a consistent configuration. Upstream Linux removed the redundant Interrupt-parent property from mmc, mac, lcdc and tscadc sub nodes. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-26ARM: rmobile: Add u-boot, dm-pre-reloc to clock nodes on Gen3Marek Vasut
We need the clock available very early, add the u-boot,dm-pre-reloc DT property on those nodes, so they come up very in the process. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-25imx: use BOOT_DEVICE_BOARD instead of UARTStefan Agner
i.MX 6 serial downloader is not necessarily booting via UART but can also boot from USB. In fact only some i.MX chips have serial downloader support via UART (e.g. 6UL/ULL and Vybrid) but all of them have serial downloader support via USB. Use the more appropriate BOOT_DEVICE_BOARD define which is used for ROM provided recovery mechanisms in general. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-08-25imx: fix USB boot mode detection for i.MX 6UL and 6ULLStefan Agner
Add the reserved boot mode used in the bmode command for i.MX 6UL and 6ULL as introduced in commit 3fd9579085fa ("imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL"). Also replace BMODE_UART with BMODE_RESERVED, which is more appropriate. Commit 96aac843b68d ("imx: Use IMX6_BMODE_* macros instead of numericals") added macros for boot modes, in the process the reserved boot mode got named BMODE_UART. We use the reserved boot mode in the bmode command to let the boot ROM enter serial downloader recovery mode. But this is only a side effect, the actual boot mode is reserved... Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-08-23imx: fix licensing in i.MX filesStefano Babic
Some files for i.MX do not yet have the SPDX ID to reference the correct license. Signed-off-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Wolfgang Denk <wd@denx.de>
2017-08-23imx: mx7: psci: add copyright and licensePeng Fan
Add copyright and license header. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-08-20ARM: dts: uniphier: add dr_mode property to dwc3 nodeMasahiro Yamada
Since commit 576e3cc700c5 ("usb: host: xhci-dwc3: Add dual role mode support from DT"), warning is displayed if dr_mode is not specified. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Revert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"Masahiro Yamada
This reverts commit 82d075e79fa509ffb8ecd8dd2dc216929d6e8289. Commit 82d075e79fa5 ("ARM: uniphier: fix ROM boot mode for PH1-sLD3") was a workaround for sLD3. Now the sLD3 SoC support has been removed. Revert it to allow to simplify the init code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Revert "ARM: uniphier: move lowlevel debug init code after page table switch"Masahiro Yamada
This reverts commit bcc51c1512a3deb6a9fdd37362c6dde32ad3da23. Commit bcc51c1512a3 ("ARM: uniphier: move lowlevel debug init code after page table switch") was intended to support lowlevel debug for sLD3. Now the sLD3 SoC support has been removed. Revert it to allow to enable lowlevel debug earlier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20ARM: uniphier: remove sLD3 SoC supportMasahiro Yamada
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20clk: uniphier: fix unmet direct dependencies warningMasahiro Yamada
Since commit f0776a551764 ("spl: dm: Kconfig: SPL_CLK depends on SPL_DM"), the following warning is displayed: $ make uniphier_v8_defconfig warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects SPL_CLK which has unmet direct dependencies (CLK && SPL_DM) While I am here, I am removing the prompt to make it user-unconfigurable option so that "select CLK_UNIPHIER" can be omitted. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2017-08-18rockchip: rk322x: update MACRO for mmc clksel regKever Yang
The description for eMMC/SDIO/SDMMC src is not correct, update the CRU_CLKSEL11_CON value definition according to TRM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: rk322x: update dram bank sizeKever Yang
The DRAM start address is not 0, so need to update the last bank size as: DRAM start addr + DRAM_SIZE - last bank start addr Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-18rockchip: rk3399: spl: remove unused header inclusionPhilipp Tomsich
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the '#include'-statement. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: dts: rk3399-evb: remove redundant gmac nodeKever Yang
There are two same gmac node, remove one. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-17rockchip: dts: rk3399-firefly: update gmac parameterKever Yang
Update the tx_delay and rx_delay to match the timing for rk3399-firefly board to improve the stability of gmac data transfer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-17dm: mmc: Drop CONFIG_DM_MMC_OPSSimon Glass
All boards which use DM_MMC have now been converted to use DM_MMC_OPS. Drop the option and good riddance. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-23 09:49:37 +0000