summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-10-10arm: remove prototype for get_timer_maskedPatrick Delaunay
The interruption support had be removed for ARM architecture and the function get_timer_masked() is no more used except in some the timer.c files. This patch clean each timer.c which implement this function and remove the associated prototype in u-boot-arm.h For timer.c, I don't verify if the weak version of get_timer (in lib/time.c) can be used Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for udelay_maskedPatrick Delaunay
The interruption support had be removed for ARM architecture and the function udelay_masked() is no more used except in some timer.c files and have the same content than udelay() or __udelay(). This patch update each timer.c implementing this function and remove the associated prototype in u-boot-arm.h. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for reset_timer_maskedPatrick Delaunay
Remove prototype for function only used in one file Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for arch_interrupt_initPatrick Delaunay
Remove prototype for no more existing function Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: K3: am654: Add support for getting boot modeAndrew F. Davis
Read the boot mode register to find the boot mode. Only use eMMC boot0 mode when the mode is eMMC boot (called BOOT_DEVICE_MMC1 currently due to current conflating of boot mode and boot device), and not iff the boot device is MMC port 0. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-10-10arm: K3: am654: Choose MMC boot device based on boot portAndrew F. Davis
For most devices the boot mode maps directly to the boot device. For MMC this is not the case as we have two MMC boot modes and two MMC boot devices (ports). Check the boot port to determine which MMC device was our boot device. Make this change for both primary and secondary boot modes. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-10-10gpio: da8xx: Push generic defines of gpio.h out of mach-davinciKeerthy
Push generic defines of gpio.h out of mach-davinci to drivers/gpio now that non-davinci architectures are beginning to use this IP. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix calimain build] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-10ARM: meson: Add Khadas VIM2 board supportLoic Devulder
This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-10ARM: meson: Add Khadas VIM2 board DTLoic Devulder
This adds Device Tree for the Khadas VIM2 board. The meson-gxm-khadas-vim2.dts is synchronized from Linux 4.18.10. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-10ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1Patrice Chotard
Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-10-08ARM: meson: Extend mem_map to support 3GiB of RAMLoic Devulder
The current mem_map definition for Meson SoCs has support for up to 2GiB of RAM. According to S905, S905X, S912 and S805X datasheets the DDR region is set from 0x00000000 to 0xBFFFFFFF, so mem_map's definition should be changed accordingly. It is also needed to be able to boot Khadas VIM2 board with S912 SoC. Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2018-10-07arm: dt: hikey: Add optee nodeJens Wiklander
Sync with 14e21cb8f811 ("arm64: dt: hikey: Add optee node" from Linux kernel. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-06mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7Patrice Chotard
This allows to boot all STM32F7 and STM32H7 boards independently of the amount of embedded SDRAM. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-10-06ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 TorpedoAdam Ford
With the device trees doing most of the work of pin-muxing and DM doing much of the peripheral initialization, this creates new defconfig files for each of the Logic PD variants with proper register settings/pin-muxing. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-06ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LVAdam Ford
The baseboards and SOM's are virtually identical to their DM37 counterparts, but OMAP36/37 and OMAP3 have some minor register differences. With the boards being mostly driven by device trees now, this synchronizes their respective device trees with linux-omap for-next branch destined for 4.20 (or whatever the version after 4.19 will be called) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xxAdam Ford
With the introduction of the omap serial driver, the need for some of these U-Boot specific modifications is gone. This cleans up this unnneeded stuff. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with KernelAdam Ford
The device tree entries are from linux-omap's for-next branch destined to me put into 4.20 (or whatever the version is after 4.19) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2018-10-04rockchip: make_fit_atf: make python3 compatibleMian Yousaf Kaukab
Make script python3 compatible. No functional changes intended. Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf: use elf entry pointMian Yousaf Kaukab
make_fit_atf.py uses physical address of first segment as the entry point to bl31. It is incorrect and causes following abort when bl31_entry() is called: U-Boot SPL board initTrying to boot from MMC1 "Synchronous Abort" handler, esr 0x02000000 elr: 0000000000000000 lr : 00000000ff8c7e8c x 0: 00000000ff8e0000 x 1: 0000000000000000 x 2: 0000000000000000 x 3: 00000000ff8e0180 x 4: 0000000000000000 x 5: 0000000000000000 x 6: 0000000000000030 x 7: 00000000ff8e0188 x 8: 00000000000001e0 x 9: 0000000000000000 x10: 000000000007fcdc x11: 00000000002881b8 x12: 00000000000001a2 x13: 0000000000000198 x14: 000000000007fdcc x15: 00000000002881b8 x16: 00000000003c0724 x17: 00000000003c0718 x18: 000000000007fe80 x19: 00000000ff8e0000 x20: 0000000000200000 x21: 00000000ff8e0000 x22: 0000000000000000 x23: 000000000007fe30 x24: 00000000ff8d1c3c x25: 00000000ff8d5000 x26: 00000000deadbeef x27: 00000000000004a0 x28: 000000000000009c x29: 000000000007fd90 Fix it by using the entry point from the elf header. Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: add fit source file for pack itb with op-teeKever Yang
We package U-Boot and OP-TEE into one itb file for SPL, so that we can support OP-TEE in SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-04rockchip: make_fit_atf: fix warning unit_address_vs_regKever Yang
Patch fix warning: /builddir/BUILD/u-boot-2018.05-rc2/"arch/arm/mach-rockchip/make_fit_atf.py" \ arch/arm/dts/rk3399-firefly.dtb > u-boot.its ./tools/mkimage -f u-boot.its -E u-boot.itb >/dev/null && cat /dev/null u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/uboot@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@2 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/atf@3 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /images/fdt@1 has a unit name, but no reg property u-boot.itb.tmp: Warning (unit_address_vs_reg): Node /configurations/config@1 has a unit name, but no reg property make[1]: Leaving directory '/builddir/BUILD/u-boot-2018.05-rc2/builds/firefly-rk3399' Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-03Merge tag 'rockchip-for-v2018.11' of git://git.denx.de/u-boot-rockchipTom Rini
Rockchip changes for 2018.11
2018-10-03arm: socfpga: stratix10: add sgmii in phymode setupOoi, Joyce
Additional sgmii phymode is added in socfpga_phymode_setup() along with a minor fix for maximum number of GMACs. Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
2018-10-03arm: socfpga: Remove unused function socfpga_emac_manage_reset()Ley Foon Tan
Remove code from the reset manager that is never called. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-10-03ARM: rmobile: Enable PHY framework on Gen3Marek Vasut
Enable PHY framework on Gen3, this is required for USB EHCI PHY support. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-03ARM: rmobile: Mark 4-64GiB as DRAM on Gen3Marek Vasut
Mark area 0x1_0000_0000 - 0x10_0000_0000 as DRAM on Gen3 as the chip is capable of addressing that and U-Boot can make use of it. This patch prevents exception when accessing those areas. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-03ARM: dts: rmobile: Reinstate missing i2c6 on PorterMarek Vasut
The I2C6 is used to communicate with the PMIC and it was removed during DT sync with Linux 4.17. Reinstate it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-02Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
This is the PR for SPI-NAND changes along with few spi changes. [trini: Re-sync changes for ls1012afrwy_qspi*_defconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-02rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarockHeiko Stuebner
It is good practice to make the setting of gpio-pinctrls explicitly in the devicetree, and in this case even necessary. Rockchip boards start with iomux settings set to gpio for most pins and while the linux pinctrl driver also implicitly sets the gpio function if a pin is requested as gpio that is not necessarily true for other drivers. The issue in question stems from uboot, where the sdmmc_pwr pin is set to function 1 (sdmmc-power) by the bootrom when reading the 1st-stage loader. The regulator controlled by the pin is active-low though, so when the dwmmc hw-block sets its enabled bit, it actually disables the regulator. By changing the pin back to gpio we fix that behaviour. [picked from the identical linux patch https://patchwork.kernel.org/patch/10609253/] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-02rockchip: rk3188: add u-boot-specific mmc propertiesHeiko Stuebner
The dwmmc controllers on rk3188 do not have idma support, so need to use the fifo-mode and it my tests they became confused and stopped working if the frequency was to high. While I only tested in somewhat bigger steps, 32MHz for example hung the controller, while reducing it to 16MHz worked just fine and is reasonably fast to load a kernel from mmc. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-09-30dts: db410c: Add bindings for MSM USB phyRamon Fried
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30db410c: serial# env using msm board serialRamon Fried
The serial# environment variable needs to be defined so it will be used by fastboot as serial for the endpoint descriptor. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30dts: db410c: add alias for USBRamon Fried
Alias is required so req-seq will be filled. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-29Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-09-29Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A, LS1043A, LS1046A, LS1088A, LS2088A. Switch to driver model for SATA on LS1021A and LS1043A. Add support for LS1012AFRWY rev C board. Enable SMMU for LS1043A.
2018-09-29ARM: da850evm_direct_nor_defconfig: Enable DM_SERIALAdam Ford
With DM enabled, this patch enables DM_SERIAL and removes the NS16550 initialization from da850_lowlevel since the driver will take care of that itself. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-29ARM: DTS: various omap3: Remove cd-inverted from u-boot.dtsiAdam Ford
With the omap_mmc driver no longer supporting cd-inverted, this patch removes all these references since they are not needed. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-29mmc: omap_mmc: Remove invert referencesAdam Ford
With DM_GPIO and DM_MMC translating GPIO_ACTIVE_LOW, any boards using the 'cd-invert' option will no longer need to do this. This patch removes the support for 'invert' from the MMC driver. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Fix warning over when !DM_GPIO] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-28ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28board: sama5d2_ptc_ek: add pda detect call at init timeEugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28board: sama5d3_xplained: add pda detect call at init timeEugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A23/A33/r16 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. A23: commit bc3bd041fe766219a44688b182c260064007f0cc Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:02 2018 +0200 ARM: dts: sun8i: a23/a33: declare NAND pins A33: commit 88fe315d2c0a397ef42d7639addab0e021ae911d Author: Maxime Ripard <maxime.ripard@bootlin.com> Date: Wed Apr 4 11:57:15 2018 +0200 ARM: dts: sun8i: a33: Add the DSI-related nodes r16: commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96 Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:03 2018 +0200 ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support Note: - Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since sun8i-a23-a33.dtsi is added with Linux sync. - Don't sync non U-Boot supported dts files sun8i-a23-ippo-q8h-v1.2.dts sun8i-a23-ippo-q8h-v5.dts sun8i-a33-et-q8-v1.6.dts sun8i-a33-ippo-q8h-v1.2.dts sun8i-r16-nintendo-nes-classic.dts sun8i-r16-nintendo-super-nes-classic.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5 Author: Stefan Mavrodiev <stefan@olimex.com> Date: Wed May 16 14:38:08 2018 +0300 ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board Note: - Update sun7i-a20-primo73.dts as per Linux, since this dts is U-Boot specific. - Drop sun7i-a20-olimex-som-evb-emmc.dts since no board added for this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A31/A31s devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit b240b419db5d624ce7a5a397d6f62a1a686009ec Merge: 9c2dd8405c0c 518d2f43c358 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Thu Apr 5 21:18:09 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2025-01-22 20:37:28 +0000