summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-08-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Various improvements to Keymile boards - mostly DT conversation (Pascal & Holger) - Removal of now unsupported Keymile boards (Pascal & Holger) - Small MVEBU PCI fix (Marek) - Turris Omnia defconfig update (Marek) - Misc Allied Telesis defconfig updates (Chris)
2019-08-12Merge tag 'u-boot-amlogic-20190812' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - amlogic: add support for the SEI Robotic SEI510
2019-08-12Merge branch '2019-08-11-ti-imports'Tom Rini
- More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
2019-08-12arm: K3: sysfw-loader: Do not require full printf() for version infoAndreas Dannenberg
A previous commit... commit 2a51e16bd57a ("configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default") ...causes the System Firmware version string during SPL boot to no longer getting printed to the console as expected. To fix this issue rework the handling of that string to only use basic printf() syntax rather than for example disabling CONFIG_USE_TINY_PRINTF on affected devices, this way maintaining most of the memory size benefit the initial patch brings when it comes to SPL. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-12arm: dts: k3-am65: add support for PCIe and SERDESSekhar Nori
Add needed device-tree nodes to support PCIe 0 and SERDES on AM65x SoC. The nodes are kept disabled by default. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12board/BuR/brsmarc1: initial commitHannes Schmelzer
This commit adds support for the B&R brsmarc1 SoM. The SoM is based on TI's AM335x SoC. Mainly vxWorks 6.9.4.x is running on the board, doing some PLC stuff on various carrier boards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-12watchdog: omap_wdt: Disable DM watchdog support in SPLSuniel Mahesh
This patch disables DM watchdog support for SPL builds and uses the legacy omap watchdog driver on TI AM335x chipsets. The following build error is reported if DM watchdog support was enabled in SPL: CC spl/drivers/usb/gadget/rndis.o LD spl/drivers/usb/gadget/built-in.o LD spl/drivers/usb/musb-new/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 440 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Adjusted WATCHDOG_RESET macro accordingly. Earlier it was pointing to hw_watchdog_reset. Since CONFIG_WATCHDOG replaces CONFIG_HW_WATCHDOG, now WATCHDOG_RESET macro points to watchdog_reset. This watchdog_reset is not defined anywhere for am33xx/omap2 and needs to be defined. Fixed this by simply calling hw_watchdog_reset in watchdog_reset. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx/omap2 based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> [trini: Fix watchdog.h logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12watchdog: omap_wdt: Convert watchdog driver to use DT and DMSuniel Mahesh
This patch adds device tree and driver model watchdog support, converts the legacy omap watchdog driver to driver model for TI AM335x chipsets. The following compile warning is removed: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices after DT/DM conversion, adjusted kconfig accordingly. DM watchdog support is enabled by default in SPL. The SPL image doesn't fit into SRAM because of size constraints and build breaks with an overflow. For this reason DM watchdog support should be disabled in SPL, driver code should be adjusted accordingly to serve this purpose. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-12ARM: meson: Add support for fastboot_set_reboot_flag()Neil Armstrong
Add support for fastboot_set_reboot_flag() by storing the reboot flag in the common code to be used by the custom PSCI reboot handler. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12arm: meson: add sm command to retrieve the reboot reasonNeil Armstrong
The Secure Monitor offers multiple services, like returning the SoC unique serial number, and can provide the "reboot reason" as set by the previous booted system. This extends the Amlogic specific "sm" cmd with a "reboot_reason" subcommand to print or set a specified environment variable with the reboot reason in human readable format. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12arm: meson: add sm cmd to retrieve SoC serialNeil Armstrong
The Secure Monitor offers multiple services, like returning the SoC unique serial number, already used to generate an unique MAC address. This adds a new, Amlogic specific, "sm" cmd with a "serial" subcommand to write the SoC unique serial to memory. This "cm" command will be extended in further patches. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1Neil Armstrong
Import Linux 5.2-rc1 sei510 DT from 5f9e832c1370 ("Linus 5.3-rc1") for the meson-g12a-sei510 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12km/uart: port UART interface of KM Kirkwood boards to driver modelPascal Linder
Activate the driver model for the serial interface in the KM Kirkwood Kconfig file. The associated preprocessor definitions could be removed from the header file. However, the clock of 200 MHz needs to be declared in the device tree. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Drop environment.h header file where not neededSimon Glass
This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move get/set_default_env() to env.hSimon Glass
Move these functions to the new header file and rename set_default_env() to env_set_default() so that it has a consistent env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get() to env.hSimon Glass
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_hex() to env.hSimon Glass
Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_init() to env.hSimon Glass
Move env_init() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11board: hisilicon: Add support for Hikey960 boardManivannan Sadhasivam
This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC. More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/ The initial supported/tested devices include: - Debug serial - SD With these support, it's good enough for loading Linux Kernel from SD. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11arm: dts: Add devicetree for Hikey960 boardManivannan Sadhasivam
This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11arm: dts: Import HI3660 devicetree from LinuxManivannan Sadhasivam
This commit imports HI3660 SoC devicetree from Linux Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
- R8A77980 V3H support
2019-08-09ARM: renesas: Add R8A77980 V3H Condor board codeMarek Vasut
Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09ARM: renesas: Add R8A77980 V3H platform codeMarek Vasut
Add a few bits of platform code to support R8A77980 V3H SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09ARM: dts: renesas: Add R8A77980 V3H DTs and headersMarek Vasut
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09apalis-tk1: support v1.2 hardware revisionMarcel Ziswiler
Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is loaded on V1.2 and later modules and resp. USB power enable signals activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: remove non-essential power rails on bootDominik Sliwa
When mainline kernels reboot TK1 they use SW_RESET, that reset mode does not reset PMIC. Some rails need to be off for RAM Re-repair to work correctly. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1/t30: colibri_t30: display reset reasonDominik Sliwa
Display proper reset reason after the SoC info. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
2019-08-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Remove unused bcm2835 watchdog driver (still non-DM) - Cosmetic fixup of mtk_wdt.c
2019-08-07ARM: dts: add hifsys reset for MediaTek SoCsRyder Lee
This adds missing hifsys reset parts in header files. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-07arm: dts: change MT7629 to use spi-mem rather than qspiWeijie Gao
The original mtk_qspi driver has been removed. We change MT7629 to use newly added mtk-spimem driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-08-05rockchip: Kconfig: enable TPL support for rk3328Kever Yang
Enable TPL support and some related option in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/430b01462bf3f24aaf7920ae2587a6943c39ab5d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: dts: rk3328: update dmc node for driverKever Yang
Update dmc node for full feature driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/1e1495636574c78ea9d3af3e0aae95d5204612d6 with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: ram: add full feature rk3328 DRAM driverKever Yang
This driver supports DDR3/LPDDR3/DDR4 SDRAM initialization. Signed-off-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/9fb0777ec3cc6a89af9d2e0969c3bfe58306a88d with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: dts: rk3328: Add rk3328-evb-u-boot.dtsiMatwey V. Kornilov
Split u-boot specific dts configuration to separate rk3328-evb-u-boot.dtsi Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm: dts: ficus: Enable booting from eMMC when using SPLManivannan Sadhasivam
This commits enables booting from eMMC when using SPL on 96Boards Ficus board by adding SDHCI to boot order. Since the SDHCI driver already has the reloc flag, this works straightaway. While we are at it, let's also include the common u-boot dtsi for rk3399. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm: dts: rock960: Enable booting from eMMC when using SPLManivannan Sadhasivam
This commits enables booting from eMMC when using SPL on 96Boards Rock960 board by adding SDHCI to boot order. Since the SDHCI driver already has the reloc flag, this works straightaway. While we are at it, let's also include the common u-boot dtsi for rk3399. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas Edge-CaptainNick Xie
Add devicetree support for Khadas Edge-Captain. Khadas Captain is the carrier board for Khadas Edge. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas Edge-VNick Xie
Add devicetree support for Khadas Edge-V. Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - SD card slot - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP, MIPI DSI/CSI, eDP - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - Full 4 Lane M.2 Socket - 16MB SPI Flash - IR - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05arm64: dts: rockchip: Add support for Khadas EdgeNick Xie
Add devicetree support for Khadas Edge. Khadas Edge is an expandable Rockchip RK3399 board with goldfinger. Specification - Rockchip RK3399 - Dual-Channel 2GB/4GB LPDDR4 - Onboard 16GB/32GB/128GB eMMC - RTL8211FD 1Gbps - AP6356S/AP6398S WiFI/BT - HDMI Out, DP - USB 3.0, 2.0 - USB Type C power and data - 16MB SPI Flash - Programmable MCU Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2: "arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards" (sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e) Signed-off-by: Nick Xie <nick@khadas.com> Tested-by: Chris Webb <chris@arachsys.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: rk3328: enable DMA for MMCs at Rock64Matwey V. Kornilov
DMA for MMCs can be enabled, since the previous patch fixes the following issue in SPL: Trying to boot from MMC1 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: rk3328: set DDR as non-secure in SPLKever Yang
Set DDR as non-secure so that MMC DMA can access. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/bfe741ab9eb4f97371a4e6c24185419d57a3a75f and https://github.com/rockchip-linux/u-boot/commit/73d952acc8cc1ddad6652ba71895d9fe928c1e4b with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its referencesStefan Roese
The BCM2835/2836 watchdog is not used in mainline U-Boot at all. This patch removes the driver and its references (CONFIG_BCM2835_WDT) completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Paolo Pisati <p.pisati@gmail.com>
2019-07-31Merge tag 'u-boot-amlogic-20190731' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
2019-07-31ARM: dts: da850-evm: Fix MDIO pinmuxAdam Ford
In attempts to speed up SPL and reduce size, the MDIO pin muxing was inadvertently affected. Since the ethernet driver will setup the pin muxing when ethernet is loaded, this patch will also pinmux the MDIO pins at the same time. Once an DM compatible MDIO driver is available, this can be removed. Fixes: 877ab2423bc2 ("ARM: davinci: da850: Manual pinmux only when PINCTRL not available") Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit (git 2.34.1) at 2025-02-02 23:26:40 +0000