summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-08-07arm: dts: change MT7629 to use spi-mem rather than qspiWeijie Gao
The original mtk_qspi driver has been removed. We change MT7629 to use newly added mtk-spimem driver. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-31Merge tag 'u-boot-amlogic-20190731' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
2019-07-31ARM: dts: da850-evm: Fix MDIO pinmuxAdam Ford
In attempts to speed up SPL and reduce size, the MDIO pin muxing was inadvertently affected. Since the ethernet driver will setup the pin muxing when ethernet is loaded, this patch will also pinmux the MDIO pins at the same time. Once an DM compatible MDIO driver is available, this can be removed. Fixes: 877ab2423bc2 ("ARM: davinci: da850: Manual pinmux only when PINCTRL not available") Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains propertySuman Anna
The commit 355be915ed08 ("arm: dts: k3-am654: Update power-domains property for each node") has updated the power-domain cells value and updated power-domains property in various existing dts nodes but missed updating the cpsw_nuss node. This results in the following build warning, fix this. arch/arm/dts/k3-am654-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2 arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2 Fixes: 355be915ed08 ("arm: dts: k3-am654: Update power-domains property for each node") Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31omap: Correct the fastboot product varSam Protsenko
"fastboot flashall" expects "fastboot getvar product" value to be one of values provided in android-info.txt file (in AOSP), from "require board=" list. Before this patch, "am57xx" is returned for all AM57xx based boards, as it's set in $board env var from SYS_BOARD in board/ti/am57xx/Kconfig file, which is used for default implementation of "fastboot getvar product". In order to fix that inconsistency, let's do next: 1. In U-Boot: override fastboot.product, reusing the value from $board_name 2. In AOSP: provide values for all AM57xx boards we can use to device/ti/beagle_x15/board-info.txt file This way requirements check in "fastboot flashall" will work as expected, verifying that user tries to flash images to the board which those images were built for. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Acked-by: Andrew F. Davis <afd@ti.com>
2019-07-31ARM: meson-g12a: Handle 4GiB DRAM sizeNeil Armstrong
When configured with 4GiB DRAM size, only 3.8GiB is available, the I/O beeing mapped in the last 256MiB of the first 4GiB physical memory/ First fixup the mm_region to handle the first 3.8GiB as memory and the last 256MiB as I/O. Then limit the real memory reported by the firmware to the available physical space, 3.8GiB aligned with the mm_region memory zone size. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: add support for Odroid-N2Neil Armstrong
Import HardKernel Odroid-N2 DT from Linux 5.3-rc1, commit 5f9e832c1370 ("Linus 5.3-rc1") based on an Amlogic G12B S922X SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1Neil Armstrong
Sync the Amlogic Meson G12A DT and Bindings file with the Linux 5.3-rc1 from the commit 5f9e832c1370 ("Linus 5.3-rc1"). Also remove the meson-g12a-u-boot.dtsi and meson-g12a-u200-u-boot.dtsi, now conflicting with the main DT content. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-30Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
2019-07-30Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2019-07-30arm64: zynqmp: add support for Avnet UltraZed-EV Starter KitLuca Ceresoli
Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the only publicly-available compatible carrier card. The SoM is based on the EV version of the Xilinx ZynqMP SoC+FPGA. The psu_init_gpl.c file has been generated from the board definition files at [0] using Vivado 2018.3 and then minimized by tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since it is not mentioned in device tree and fixed a checkpatch error. [0] https://github.com/Avnet/bdf/tree/3686c9ff7d2f0467fb4fcf39f861b8d6ff183b12/ultrazed_7ev_cc/1.1 Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: spl: install a PMU firmware config object at runtimeLuca Ceresoli
Optionally allow U-Boot to load a configuration object into the Power Management Unit (PMU) firmware on Xilinx ZynqMP. The configuration object is required by the PMU FW to enable most SoC peripherals. So far the only way to boot using U-Boot SPL was to hard-code the configuration object in the PMU firmware. Allow a different boot process, where the PMU FW is equal for any ZynqMP chip and its configuration is passed at runtime by U-Boot SPL. All the code for Inter-processor communication with the PMU is isolated in a new file (pmu_ipc.c). The code is inspired by the same feature as implemented in the Xilinx First Stage Bootloader (FSBL) and Arm Trusted Firmware: * https://github.com/Xilinx/embeddedsw/blob/fb647e6b4c00f5154eba52a88b948195b6f1dc2b/lib/sw_apps/zynqmp_fsbl/src/xfsbl_misc_drivers.c#L295 * https://github.com/ARM-software/arm-trusted-firmware/blob/c48d02bade88b07fa7f43aa44e5217f68e5d047f/plat/xilinx/zynqmp/pm_service/pm_api_sys.c#L357 SPL logs on the console before loading the configuration object: U-Boot SPL 2019.07-rc1-00511-gaec224515c87 (May 15 2019 - 08:43:41 +0200) Loading PMUFW cfg obj (2008 bytes) EL Level: EL3 ... Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: Rename zc1275 to zcu1275Michal Simek
Name of this platform has changed and released to customers that's why name has also changed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: uboot
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29arm: mach-keystone: Use appended original image size in image processingAndrew F. Davis
When an image is signed/encrypted on K2 devices the image may get padded to meet alignment requirements for the signature/encryption type. The original size is appended as 4 bytes little-endian to the end of the final image. Normally the trailing extra bytes are ignored and so restoring the exact original size is not important. In the case of initrd the original size is important as the kernel uses it to look for additional filesystem data and can do the wrong thing when the size is not correct. Read off the original size and report it back from the image post processing stage. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-29davinci: da850-evm: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29davinci: omapl138-lcdk: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29board: mediatek: Add pumpkin board supportFabien Parent
The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini
- Various gen5 fixes
2019-07-29Merge tag 'video-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
2019-07-29Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29rockchip: rv1108: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-07-29rockchip: rk3288: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Move rk3288_detect_reset_reason to soc fileKever Yang
The rk3288_detect_reset_reason() is per-SoC operation, move it to rk3288.c, and extend the rk_board_late_init() with rk3288_board_late_init() to make all the board works fine as before. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Move clock CMD to SoC fileKever Yang
Move the do_clock CMD to rk3288.c so that we can re-use the common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Move veyron_init() back to veyron.cKever Yang
The veyron_init() should go to its board file veyron.c, and the board_early_init_f() could be the right place. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move board_early_init_f() back to veyronKever Yang
The board_early_init_f() is only used by veyron board now, move it into the board file veyron.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move SOC setting into arch_cpu_init()Kever Yang
Qos setting and emmc relate SoC setting should go to arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: Move SoC one time setting into arch_cpu_init()Kever Yang
The setting for noc remap should goto arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: move SoC setting into arch_cpu_init()Kever Yang
The SoC one time setting should go to arch_cpu_init() in rk322x.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3128: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: move dram_init() into soc fileKever Yang
Move dram_init() into rk3036.c so that we can use to common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: sdram_common: add common dram_init_banksizeKever Yang
dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common board file for U-Boot properKever Yang
Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: clean up board_usb_init() for all SoCsKever Yang
Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: convert to use ROCKCHIP_BOOT_MODE_REG for fastboot tagKever Yang
The fastboot_set_reboot_flag() update a TAG into a register for next boot, use the common macro for the register so that we can re-use the function for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add board_debug_uart_init()Kever Yang
Add board_debug_uart_init() to make the debug UART work with correct setting. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common spl board fileKever Yang
rk3399 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move chromebook bob specific flow to its board fileKever Yang
Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move boot_devices into soc fileKever Yang
Move boot_devices definition into rk3399.c, so that we can share the common code for board_spl_was_booted_from(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399; move spl_board_init() into soc fileKever Yang
Move spl_board_init() into rk3399.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move SoC setting into arch_cpu_init()Kever Yang
SoC setting like DDR secure region and EMMC clock setting should go to arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-27 17:52:47 +0000