summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-12-10davinci: fixed cpu resetDavide Bonfanti
The reset procedure works on watchdog timer while before it was modifying TIMER_1 registers. Tested on DM365. Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
2012-12-10omap: emif: configure emif only when requiredLokesh Vutla
DMM_LISA_MAP registers program whether memory is mapped on particular EMIF or not. Irrespective of these registers EMIF is getting configured. Correcting the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2012-12-10OMAP: Tweak omap-common/Makefile since reset.S -> reset.cRobert P. J. Day
Git commit d417d1db5f9092d125ddea882ced77eaa5f3d236 replaced the omap-common file reset.S with reset.c, but the Makefile was not adjusted for that. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2012-12-10omap4: Add comments on some "#endif"s for readability.Robert P. J. Day
No functional changes, simply for readability. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2012-12-10omap3: Add a few comments to "#endif"s for readability.Robert P. J. Day
No functional changes, just more comments for readability when a preprocessor check spans more than a few lines, and for consistency. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2012-12-10Pass sdrc timing values through board_sdrc_timings structurePeter Barada
Instead of passing individual registers by value to board_get_mem_timings, pass a board_mem_timings structure pointer for the board files to fill in. Pass same structure pointer to write_sdrc_timings. This saves about 90 bytes of space in SPL. Signed-off-by: Peter Barada <peter.barada@logicpd.com>
2012-12-10am33xx: add ELM supportMansoor Ahamed
AM33XX has Error Location Module (ELM) that can be used in conjuction with GPMC controller to implement BCH codes fully in hardware. This code is mostly taken from arago tree. Signed-off-by: Mansoor Ahamed <mansoor.ahamed@ti.com> Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-12-10am33xx: NAND supportIlya Yanok
TI AM33XX has the same GPMC controller as OMAP3 so we could just use the existing omap_gpmc driver. This patch adds adds required definitions/intialization. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-12-10OMAP: include sys_proto.h from boot-commonIlya Yanok
Include asm/arch/sys_proto.h for gpmc_init prototype. Without this we get a warning while building for AM335x. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-12-10omap3/mem.c: remove unused definesAndreas Bießmann
These GPMC_CS defines are a leftover from prior gpmc_init(). Commit 187af954 removed the need for these definitions but missed to remove them. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Tom Rini <trini@ti.com>
2012-12-10Merge branch 'master' of git://git.denx.de/u-boot into resolveMinkyu Kang
Conflicts: README board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
2012-12-09at91sam9x5: enable USB support for 9x5ek board.Richard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-12-08Merge branch 'master' of git://git.denx.de/u-boot into masterStefano Babic
Conflicts: drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/woodburn_common.h board/woodburn/woodburn.c These boards still use the old old PMIC framework, so they do not merge properly after the power framework was merged into mainline. Fix all conflicts and update woodburn to use Power Framework. Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-12-07mxs: SPL: Generalize memory initializationOtavio Salvador
Use a generic 'dram_vals[]' array that has the full initialization sequence and rename the initialization method so it doesn't has a frequency on its name. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-12-04mxs: Staticize SPL functionsMarek Vasut
The MXS SPL didn't mark local functions "static". Fix it. This also makes the SPL smaller by roughly 300 bytes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-12-04mxs: Properly setup VDDD in power supply setup codeMarek Vasut
The memory setup code adjusted the VDDD voltage. Remove this adjustment and configure the VDDD voltage correctly in the power supply setup code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-12-04mxs: Implement common function to setup VDDxMarek Vasut
Implement common function to setup the VDDIO, VDDD and VDDA voltage. Right now, there are two almost identical functions to setup VDDIO and VDDD, which is prone to breakage. Pull out the differences into constant structure and pass them as an argument to the common function. Moreover, the function has almost identical loops for setting higher and lower VDDx voltage. Merge these two loops. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-12-04mx28: Rename regs-power.h to regs-power-mx28.hMarek Vasut
The i.MX23 has different register layout and bit placement in the power supply. Thus, in order to be able to add support for MX23, rename the MX28's regs-power.h to regs-power-mx28.h . Moreover, add ifdef around inclusion of regs-*-mx28.h in imx-regs.h so the MX23 boards will include proper set of registers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-12-04mx28: Remove SET, CLR, TOG ops from PLLxCTRL1 registersMarek Vasut
These registers don't have _SET, _CLR and _TOG at the respective offsets available, these registers has to be toggled via R-M-W if needed. Thus do not export these offsets anymore. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2012-11-27EXYNOS: mmc: support DesignWare Controller for Samsung-SoCJaehoon Chung
Support DesignWare MMC Controller for Samsung Specific. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rajeshawari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-11-25Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2012-11-24mx28: Fix typo in POWER_DCLIMITS_NEGLIMIT_OFFSETMarek Vasut
The POWER_DCLIMITS_NEGLIMIT_OFFSET bit in mx28 power supply block is not called POWER_DCLIMITS_NETLIMIT_OFFSET, but POWER_DCLIMITS_NEGLIMIT_OFFSET. Correct the name in the header file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-24mx28: Fix typo in POWER_MINPWR_VBG_OFFMarek Vasut
The POWER_MINPWR_VBG_OFF bit in mx28 power supply block is not called POWER_MINPWR_FBG_OFF, but POWER_MINPWR_VBG_OFF. Correct the name in the header file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-20musb-new: omap2plus backend driverIlya Yanok
Backend driver for MUSB OTG controllers found on TI OMAP2/3/4 (tested only on OMAP3 Beagle). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20OMAP3: am35x: add musb functionsIlya Yanok
AM35XX specific functions for integrated USB PHY/MUSB IP. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20OMAP3: am35x_def.h: add USB definesIlya Yanok
Add defines for MUSB IP block on AM35X SoCs. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20musb-new: am35x backend driverIlya Yanok
Backend driver for MUSB OTG controllers found on TI AM35x. It seems that on AM35X interrupt status registers can be updated _before_ core registers. As we don't use true interrupts in U-Boot and poll interrupt status registers instead this can result in interrupt handler being called with non-updated core registers. This confuses the code and result in hanged transfers. Add a small delay in am35x_interrupt as a workaround. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20am33xx: init OTG hardware and new musb gadget driverIlya Yanok
AM33xx has support for dual port MUSB OTG controller. This patch adds initialization for the controller using new MUSB gadget driver and ether gadget. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20musb-new: dsps backend driverIlya Yanok
Backend driver for MUSB OTG controllers found on TI AM33xx and TI81xx SoCs (tested with AM33xx only). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-19Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2012-11-19arm: Add control over cachability of memory regionsSimon Glass
Add support for adjusting the L1 cache behavior by updating the MMU configuration. The mmu_set_region_dcache_behaviour() function allows drivers to make these changes after the MMU is set up. It is implemented only for ARMv7 at present. This is needed for LCD support, where we want to make the LCD frame buffer write-through (or off) rather than write-back. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19tegra: Add SOC support for display/lcdWei Ni
Add support for the LCD peripheral at the Tegra2 SOC level. A separate LCD driver will use this functionality to configure the display. Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com> Mayuresh Kulkarni: - changes to remove bitfields and clean up for submission Signed-off-by: Simon Glass <sjg@chromium.org> Simon Glass: - simplify code, move clock control into here, clean-up Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19tegra: Add support for PWMSimon Glass
The pulse width/frequency modulation peripheral supports generating a repeating pulse. It is useful for controlling LCD brightness. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19tegra: fdt: Add LCD definitions for TegraSimon Glass
Add LCD definitions and also a proposed binding for LCD displays. The PWM is as per what will likely be committed to linux-next soon. The displaymode binding comes from a proposal here: http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html The panel binding is new, and fills a need to specify the panel timings and other tegra-specific information. Should a binding appear that allows the pwm to handle this automatically, we can revisit this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19tegra: fdt: Add pwm binding and nodeSimon Glass
This binding will apparently soon be in linux-next. Bring it in now since we need to do something, and may as well try to target what Linux will have. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19tegra: Add display support to funcmuxSimon Glass
Add support for a default pin mapping for display1. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19tegra: Use const for pinmux_config_pingroup/table()Simon Glass
These two functions don't actually modify their arguments so add a const keyword. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19mx5: Mark lowlevel_init board-specific codeBenoît Thébaudeau
The mx5 lowlevel_init.S contains board-specific code based on the reference design. Let's keep it since it avoids creating new lowlevel_init files and it may be used by many boards. But add a config to make it optional in order not to cause issues on boards not following this part of the reference design. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Matt Sealey <matt@genesi-usa.com> Acked-by: Stefano Babic <sbabic@denx.de>
2012-11-19mx6: clock: Only show CSPI clock if CSPI is enabledFabio Estevam
If a board does not enable CSPI, there is no need to show the CSPI clock frequency as part of the 'clock' command. Reported-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@gmail.com>
2012-11-19mx5: Print CSPI clock in 'clock' commandFabio Estevam
Print CSPI clock in 'clock' command. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2012-11-19mx5: Align SPI CS naming with i.MX53 reference manualFabio Estevam
Align SPI chip select naming with i.MX53 reference manual. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-11-16ehci-mxc: Add support for i.MX35Benoît Thébaudeau
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-16ehci-mxc: Define host offsetsBenoît Thébaudeau
Some MXC SoCs like the i.MX35 have hosts located at unusual offsets, so prepare to the introduction of i.MX35 support by defining the ehci-mxc hosts offsets at SoC level. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-16mx31: Move EHCI definitions to ehci-fsl.hBenoît Thébaudeau
The EHCI definitions in i.MX31's imx-regs.h are MXC-generic, so move them to ehci-fsl.h so that all MXC SoCs can use them. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-15SPI: Add SPI Driver for EXYNOS.Rajeshwari Shinde
This patch adds SPI driver for EXYNOS. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: jy0922.shim@samsung.com Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15EXYNOS5: Add base address for SPIHatim RV
Add base address definition for SPI device on Exynos. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15EXYNOS: Add clock for SPIHatim RV
Add api to calculate and set the clock for SPI channels Signed-off-by: James Miller <jamesmiller@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15EXYNOS5: Add pinmux support for SPIRajeshwari Shinde
This patch adds pinmux support for SPI channels Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15EXYNOS: Add clock for I2SRajeshwari Shinde
This patch adds clock support for I2S Signed-off-by: R. Chandrasekar <rcsekar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2012-11-15EXYNOS: Add I2S base addressRajeshwari Shinde
This patch adds base address for I2S Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Chander Kashyap <chander.kashyap@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit (git 2.34.1) at 2024-12-28 01:08:59 +0000