summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-03-10arm: dts: imx8mq-evk: add phy-reset-gpios for fec1Alifer Moraes
Instead of resetting the ethernet phy through functions in imx8mq_evk.c, let the driver reset the phy via dts description adding a reset duration of 10 ms following atheros 8031's datasheet recommendation. Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-03-09ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dlyMax Krummenacher
The FEC in the i.MX8MM doesn't support this feature. So don't pretend one can use it. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 nodeIgor Opaniuk
Let pinctrl configuration for eMMC node (usdhc1) also be accessible in SPL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09imx8mm/mn: Add missing root clock entry for ARM core clockFrieder Schrempf
The current implementation in arch/arm/mach-imx/cpu.c uses non-DM code to retrieve the core clock frequency. As the root clock is not listed we currently get: CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Fix this by adding the missing entry, which results in: CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: Makefile: added missing ahab.oOliver Graute
added missing ahab.o in Makefile Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: mx6ul_14x14_evk: configure for 24bpp displayAnatolij Gustschin
Before DM_VIDEO conversion this board used 24bpp display configuration, so use it again. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16Fabio Estevam
Sync the imx6sx-sdb dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09ARM: dts: imx6sx: Sync with kernel 5.4.16Fabio Estevam
Sync the imx6sx dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: remove woodburn boardStefano Babic
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- ABB SECU board - Assorted minor fixes
2020-03-03ARM: socfpga: Add initial support for the ABB SECU boardHolger Brunck
Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-29ARM: dts: uniphier: remove U-Boot own EEPROM compatible and propertyMasahiro Yamada
The compatible string "i2c-eeprom" is U-Boot own compatible, which has never been approved by the DT community. "u-boot,i2c-offset-len" is also a U-Boot own hack. Linux adds "atmel,*" as generic compatibles, and U-Boot also followed it by commit d7e28918aa3f ("i2c_eeprom: Add reading support"). The U-Boot own hack is no longer needed. Just sync with Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada
Import Linux commits: 37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node") e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: rename DT nodes to follow json-schemaMasahiro Yamada
Import the nodename changes I made in Linux for avoiding dt-schama warnings. This follows the $nodename patterns in the dt-schema. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: detect the base of micro support card at run-timeMasahiro Yamada
The base address 0x43f00000 is no longer true for the future SoC. Extract the base address from the device tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: remove workaround for the NAND write protectMasahiro Yamada
This workaround was previously needed for LD4, Pro4, sLD8, Pro5 SoCs. The boot ROM does not touch this register for PXs2/LD6b or later. Now that the reset signal of the Denali NAND controller is always asserted in board_init() then deasserted in the driver, the WRITE_PROTECT register gets back to the default value, which means the write protect is deasserted. This workaround can go away entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: move NAND reset assertion to U-Boot proper from SPLMasahiro Yamada
The comment /* deassert reset */ is wrong. It asserts the reset. It no longer needs to stay in SPL. The NAND controller reset is handled in the driver. So, this assert can be moved to the board_init() of U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: add sdscript, sdboot, sdupdate environment variablesMasahiro Yamada
Add handy macros: - sdscript: source boot.scr in the file system of the SD media - sdboot : boot the kernel using the images in the file system of the SD media - sdscript: update the boot firmware in the SD media (in raw block sectors) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-25arch: arm: Fix SZ_64K undeclared compilation errorWasim Khan
Macro SZ_64K is undeclared. Include sizes.h to fix the compilation error. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-20Merge tag 'u-boot-rockchip-20200220' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399: split roc-pc-rk3399 out of evb_rk3399 - sync dts from upstream kernel for rk3399,rk3288,px30 - boot_mode: find the saradc device name
2020-02-20arch: arm: rockchip: order the rk3399 entries alphabeticallyPeter Robinson
Put the target entries for rk3399 devices in alphabetical order. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_unmap_single()Masahiro Yamada
dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_map_single()Masahiro Yamada
Make dma_map_single() return the dma address, and remove the pointless volatile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19board: roc-pc-rk3399: Add support for onboard LED's and push button to ↵Suniel Mahesh
indicate power mode Added support for onboard LED's and push button. When powered board will be in low power mode(yellow LED), on button press, board enters full power mode (red LED) and boots u-boot. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: boot_mode: find the saradc device nameHugh Cole-Baker
adc_channel_single_shot() requires the full device name e.g. "saradc@ff100000", which differs between Rockchip SoC's, but they all share the prefix "saradc"; find the ADC device with this name prefix and use its full name. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19ARM: dts: rockchip: Sync rk3288-vyasa dts from linuxJagan Teki
Sync rk3288-vyasa dts file from Linux. This sync has changes required to work HDMI output on Vyasa RK3288 board. This sync excludes the io_domains node since it is not available in rk3288.dtsi. Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are not merged to Linux yet but wil resync later if any further updates on this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3288: Enable pre console bufferJagan Teki
Enable pre console buffer for rk3288 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3288 platform boards. Buffer address used for pre console is 0x0f000000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: px30: sync the main px30 dtsi from mainlineHeiko Stuebner
There have been multiple peripherals added to the main px30 dtsi in the Linux kernel since its addition to u-boot. So to make it easier to sync board devicetrees, update the core dtsi from Linux. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsiPeter Robinson
Move the U-Boot specific bits to a -u-boot.dtsi include so all the u-boot.dtsi hierarchy is included. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19arm: dts: rockchip: rk3399: Move U-Boot specific bits to rk3399-u-bootPeter Robinson
There's some bits in the U-Boot rk3399.dtsi that aren't yet in the upstream Linux dtsi but are needed for early boot. This moves them to the u-boot.dtsi to make it easier to sync the rest of rk3399.dtsi with upstream. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventionsPeter Robinson
The upstream linux kernel for the Rockchip 3399 SoC use usbdrd3 naming so move the two remaining devices over to that for their device trees to make it easier to sync with upstream DTs. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: make the global board_fit_config_name_match __weakHeiko Stuebner
The core Rockchip spl code contains a default board_fit_config_name_match implementation doing nothing. Individual boards may want to handle this differently, so add a __weak atribute to make it possible to override this function in other places. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: make_fit_atf: use correct fdt_x references in config nodesHeiko Stuebner
The script iterates over the given devicetrees and creates both fdt_x node as well as a conf-node for each passed dt. But there is a slight bug in that it always references fdt_1 in each conf node instead of the matching fdt_x as expected. So fix that by referencing the number of the current dt similar to how the fdt_x nodes gets created. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-14Merge tag 'u-boot-stm32-20200214' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add DH Electronics DHCOM SoM and PDK2 board - DT alignment with kernel v5.5-rc7 for stm32mp1 boards - fix STM32 image format for big endian hosts in mkimage - solve warnings in device tree and code for stm32mp1 boards - remove fdt_high and initrd_high for stm32 and stih boards - add support of STM32MP15x Rev.Z - update stm32mp1 readme
2020-02-13stm32mp1: support of STM32MP15x Rev.ZPatrick Delaunay
Add support for Rev.Z of STM32MP15x cpu. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32m1: add reg for pll nodesPatrick Delaunay
Fix the following DT dtc warnings for stm32mp1 boards: Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@3: node has a unit name, but no reg property Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32mp1: correct ddr nodePatrick Delaunay
This patch fix the warning: dt.dts: Warning (simple_bus_reg): Node /soc/ddr@5A003000 simple-bus unit address format error, expected "5a003000" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32mp1: move FDCAN to PLL4_RAntonio Borneo
LTDC modifies the clock frequency to adapt it to the display. Such frequency change is not detected by the FDCAN driver that instead cache the value at probe and pretend to use it later. Keep the LTDC alone on PLL4_Q by moving the FDCAN to PLL4_R. Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7Patrick Delaunay
Device tree and binding alignment with kernel v5.5-rc7 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13stm32mp1: pwr: use the last binding for pwrPatrick Delaunay
Update the driver to use the latest binding from kernel v5.5-rc1: no more use syscon or regmap to access to pwr register and only one pwr_regulators node with the compatibility "st,stm32mp1,pwr-reg" is available. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32mp1: DT alignment with kernel v5.4Patrick Delaunay
Device tree and binding alignment with kernel v5.4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13armV7R: K3: am654: Activate early console functionalityAndreas Dannenberg
Activate early console functionality on AM65x devices to allow for early diagnostic messages until the main console is ready to get activated. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13arm: K3: j721e: Fix boot parameter table index memory addressAndreas Dannenberg
The boot parameter table index memory address for J721E was configured to an incorrect value which prevented the use of this definition to determine which boot parameter table is active which is needed to be able to distinguish between primary and backup boot modes. Fix this issue by updating the value to the correct one also in alignment with the J721E Technical Reference Manual (TRM). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13arm: mach-k3: Fix nomenclature on Silicon RevisionsLokesh Vutla
Data manual mentions the new silicon revisions as SR instead of PG. Use the same nomenclature inside U-Boot as well. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13arm: dts: k3-j721e-r5-common-proc-board: Disable power-domains for mcu uartLokesh Vutla
mcu uart will be used during uart boot for loading sysfw.itb. Since sysfw is not yet available during uart load, power-domain cannot be enabled. We need to rely on ROM for doing that, so disable power-domains and clocks for mcu uart. Also fix the mcu uart frequency. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13arm: dts: am437x-gp-evm: Add some nodes to u-boot.dtsiFaiz Abbas
Add scm_conf syscon node and its parents as well as the ethernet phy node to u-boot.dtsi. This enables ethernet boot. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-12ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 boardMarek Vasut
Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP15xx and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
generated by cgit (git 2.34.1) at 2025-01-11 09:04:07 +0000