summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Expand)Author
2019-10-08dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi fileLukasz Majewski
2019-10-08imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon modeLukasz Majewski
2019-10-08DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)Lukasz Majewski
2019-10-08DM: SPI: Convert display5 to use SPI with DM/DTS (but no in SPL)Lukasz Majewski
2019-10-08DM: eth: Switch display5 board to use DM_ETHLukasz Majewski
2019-10-08DM: mmc: Switch display5 board to use DM_MMC and BLK (USDHC)Lukasz Majewski
2019-10-08DM: I2C: Switch display5 board to use DM_I2CLukasz Majewski
2019-10-08pico-imx6: Add initial supportFabio Estevam
2019-10-08mx6: clock: Allow enable_ipu_clock() to be built for SPL codeFabio Estevam
2019-10-08configs: pico-imx7d: Convert to DM_VIDEOJoris Offouga
2019-10-08ARM: dts: pico-imx7d: sync device tree with v5.3-rc6Joris Offouga
2019-10-08ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts changeJoris Offouga
2019-10-08imx8: cpu: fix mac fuse word for i.MX8QMPeng Fan
2019-10-08imx8: move i.MX8 cpu desc code to drivers/cpu/imx8_cpu.cPeng Fan
2019-10-08imx: scu_api: add sc_pm_is_partition_startedPeng Fan
2019-10-08imx8: fdt: add optee nodePeng Fan
2019-10-08imx8: save args passed from ATFPeng Fan
2019-10-08imx8: fdt: configure sid for mastersPeng Fan
2019-10-08imx: scu_api: add sc_rm_set_master_sidPeng Fan
2019-10-08imx8: disable node when the resource is not ownedPeng Fan
2019-10-08imx8qm: power up SMMUPeng Fan
2019-10-08imx: sys_proto: add is_imx8qm helperPeng Fan
2019-10-08imx8: Probe the SCU driver by using uclass functionYe Li
2019-10-08imx: add container targetPeng Fan
2019-10-08imx8: support parsing i.MX8 Container filePeng Fan
2019-10-08imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsiPeng Fan
2019-10-08Kconfig: Migrate CONFIG_CSF_SIZE to KconfigBreno Matheus Lima
2019-10-08i.MX7ULP: Change clock rate calculation for NIC1 BUS and EXTYe Li
2019-10-08i.MX7ULP: Set A7 core frequency to 500Mhz for B0 chipYe Li
2019-10-08i.MX7ULP: Add CPU revision check for B0Peng Fan
2019-10-08i.MX7ULP: Workaround APLL PFD2 to 345.6MhzYe Li
2019-10-08i.MX7ULP: Fix SPLL/APLL clock rate calculation issueYe Li
2019-10-08i.MX7ULP: Fix wrong i2c configuration nameYe Li
2019-10-08i.MX7ULP: Add CONFIG_MX7ULP to kconfigYe Li
2019-10-08i.MX7ULP: Fix PCC register bits mask and offset issueYe Li
2019-10-08i.MX7ULP: Correct the clock indexBai Ping
2019-10-08i.MX7ULP: Fix system reset after a7 rtc alarm expired.Bai Ping
2019-10-08imx: i.MX7ULP: add get_boot_devicePeng Fan
2019-10-08nitrogen6x: migrate to using device treeTroy Kisky
2019-10-08ARM: imx: Support larger SPL size on IMX6DQRobert Hancock
2019-10-08spl: imx: only use HAB if spl fit signature is not enabledRicardo Salveti
2019-10-08imx: apalis_imx6: select MX6Q via KconfigRicardo Salveti
2019-10-08arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio commandPeng Fan
2019-10-08spl: pass args to board_return_to_bootromPeng Fan
2019-10-08imx: mx6ul_14x14_evk: convert to DM_VIDEOPeng Fan
2019-10-08imx: add i.MX6ULZ boardPeng Fan
2019-10-08imx: add i.MX6ULZ cpu typePeng Fan
2019-10-08arm: dts: import dts for i.MX6ULZPeng Fan
2019-10-08arm: dts: sync dts for i.MX6ULLPeng Fan
2019-10-08arm: dts: sync dts for i.MX6ULPeng Fan
generated by cgit (git 2.34.1) at 2024-12-28 14:58:47 +0000