summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-06-07rockchip: puma: reorganize devicetrees to actually work and match upstreamHeiko Stuebner
So far the puma dts files only just included the main puma dtsi without handling the actual baseboard and rk3399-puma.dtsi was very much detached from the variant in the mainline Linux kernel. Recent changes resulted in a strange situation with nonworking puma boards. Commit ab800e5a6f28 ("arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi") moved the sdram include from rk3399-puma-ddrX.dts to new files rk3399-puma-ddrx-u-boot.dtsi which were never included anywhere though. Commit 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") replaced the rk3399-puma.dtsi nearly completely, but in the kernel it definitly depends on a baseboard dts to actually enable peripherals like sd-slot, uarts, etc. So to untagle this and bring the whole thing more in line with mainline Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate DDR-option devicetrees and instead replace them with a puma Kconfig option to select and include the needed DDR variant. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: puma: fix indentation for -u-boot.dtsiHeiko Stuebner
Tabs not spaces, so transform it to the common styling. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulatorHeiko Stuebner
The regulator enable-gpio uses opposite values for the declaration vs. the enable_active_low property, breaking the regulator enablement. Make the usbhost-supply work again by bringing them in sync again. This mimics the upstream Linux change found on: http://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2020-06-07arm64: dts: rk3399-puma: fix gpio levels for gmac reset pinHeiko Stuebner
The gmac reset has opposite values for the gpio declaration and the separate reset-active, bring this in line to make u-boot also find the ethernet-phy. This mimics the upstream Linux commit found on https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rockpro64: add SPI bootMarcin Juszkiewicz
U-Boot TPL 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42 +0200) Trying to boot from SPI U-Boot 2020.07-rc3-00121-gab88251130 (Jun 03 2020 - 16:43:42 +0200) SoC: Rockchip rk3399 Reset cause: RST Model: Pine64 RockPro64 v2.1 DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPI Flash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial Out: vidconsole Err: vidconsole Model: Pine64 RockPro64 v2.1 Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 => Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07roc-rk3399-pc: Add SPI bootJagan Teki
U-Boot TPL 2020.07-rc3-00090-gd4e919f927-dirty (Jun 01 2020 - 23:45:53) Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride 256B stride lpddr4_set_rate: change freq to 400000000 mhz 0, 1 lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) Trying to boot from MMC1 NOTICE: BL31: v2.2(release): NOTICE: BL31: Built : 15:05:37, May 12 2020 U-Boot 2020.07-rc3-00087-ga21e9fd385 (Jun 02 2020 - 00:09:45 +0530) SoC: Rockchip rk3399 Reset cause: POR Model: Firefly ROC-RK3399-PC Board DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Firefly ROC-RK3399-PC Board Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3399-evb: add stdout-path for the boardKever Yang
The 'stdout-path' is missing after dts sync. Fixes: 167efc2c7a ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux") Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-07rockchip: rk3328: add rock-pi-e dts fileb.l.huang
The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328 Quad-Core ARM Cortex A53. Net - Dual ethernet port, 1 X Gbe, 1 X 100M USB - USB 3.0 DC - USB-Type C, 5V 2A Storage - TF card, eMMC Just build idbloader.img and u-boot.itb for Rockpi E board and follow the blow steps to replace the relevant partition. dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>
2020-06-04Merge tag 'u-boot-atmel-fixes-2020.07-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2020.07 cycle This set includes just two small commits that fix a build warning and add a missing serial node.
2020-06-03Merge tag 'efi-2020-07-rc4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc4 This patch series addresses the following issues: * allow compiling with clang * add missing function descriptions to the HTML documentation * simplify the validation of UEFI images * validate load options in the UEFI boot manager In a preparatory patch a structure definition is moved.
2020-06-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- H6 emac support - USB PHY H6 logic alignment
2020-06-03efi_loader: allow compiling with clangHeinrich Schuchardt
On ARM systems gd is stored in register r9 or x18. When compiling with clang gd is defined as a macro calling function gd_ptr(). So we can not make assignments to gd. In the UEFI sub-system we need to save gd when leaving to UEFI binaries and have to restore gd when reentering U-Boot. Define a new function set_gd() for setting gd and use it in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-02ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCIMasahiro Yamada
arch/arm/include/asm/system.h declares psci_arch_init(), but it is surrounded by #ifdef CONFIG_ARMV8_PSCI. psci_arch_init() is called for CONFIG_ARMV7_PSCI too. Add the missing function declaration. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-06-01sunxi: Silence warning about non-static inline functionSamuel Holland
When compiling with CONFIG_SPL_SERIAL=n, gcc warns about mbus_configure_port not being marked as static: In file included from include/common.h:34, from arch/arm/mach-sunxi/dram_sunxi_dw.c:11: include/log.h:185:4: warning: 'printf' is static but used in inline function 'mbus_configure_port' which is not static 185 | printf(pr_fmt(fmt), ##args); \ | ^~~~~~ include/log.h:192:2: note: in expansion of macro 'debug_cond' 192 | debug_cond(_DEBUG, fmt, ##args) | ^~~~~~~~~~ arch/arm/mach-sunxi/dram_sunxi_dw.c:100:2: note: in expansion of macro 'debug' 100 | debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1); | ^~~~~ Fix this by updating the function accordingly. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01Merge tag 'u-boot-stm32-20200528' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp15: fix DT on DHCOR SOM and avenger96 board - stm32mp15: re-enable KS8851 on DHCOM
2020-05-31Merge tag 'u-boot-rockchip-20200531' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix mmc of path after syncfrom kernel dts; - Add dwc3 host support with DM for rk3399; - Add usb2phy and typec phy for rockchip platform; - Migrate board list doc to rockchip.rst; - Add rk3399 Pinebook Pro board support; - Update dram_init in board_init and add memory node in SPL;
2020-05-31rockchip: spl: do full dram_init instead of only probingHeiko Stuebner
Parts of later SPL may need RAM information as well, so do full dram_init() call, which includes the existing dram probing but also initializes the ram information in gd. dram_init() from sdram.c does the following steps: - uclass_get_device(UCLASS_RAM, ...) like the current code - ret = ram_get_info(dev, &ram); - gd->ram_size = ram.size; CONFIG_SPL_RAM already makes sure that sdram.c gets compiled and thus no other variant of dram_init() can exist. So it's the same functionality as before and only adds that the SPL now aquires knowledge about the amount of available ram, which it didn't know about before. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-31rockchip: Add initial support for the Pinebook Pro laptop from Pine64.Peter Robinson
Specification: - Rockchip RK3399 - 4GB Dual-Channel LPDDR4 - eMMC socket - mSD card slot - 128Mbit (16Mb) SPI Flash - AP6256 for 11AC WiFi + BT5 - 14 inch 1920*1080 eDP MiPi display - Camera - USB 3.0, 2.0 ports - Type-C port with alt-mode display (DP 1.2) and 15W charge - DC 5V/3A - optional PCIe slot for NVMe SSD drive Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-31arm: dts: rockchip: Add initial DT for Pinebook ProPeter Robinson
Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-30ARM: dts: rk3399-evb: usb3.0 host supportFrank Wang
Configure 'tcphy1' and 'usbdrd_dwc3_1' nodes to support USB3.0 host for Rockchip RK3399 Evaluation Board. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29arm: mach-rockchip: bind sub-nodes for rk3399_sysconFrank Wang
There are some sub-nodes under the grf DT, so add bind callback function in rk3399 syscon driver to scan them recursively. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29arm64: dts: rk3399-nanopi4: Add u-boot,spl-boot-orderJagan Teki
Add u-boot,spl-boot-order as sdhci and sdmmc for booting from eMMC and SD card. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29rockchip: Fix spl mmc boot device ofpathJagan Teki
Linux v5.7-rc1 dts(i) sync has changed the sdmmc node from dwmmc@fe320000 to mmc@fe320000 and this ofpath is being used in rockchip spl bootdevice code. So, update the ofpath with a new node name and prefix "same-as-spl" to missing u-boot,spl-boot-order. Bug log: U-Boot SPL 2020.07-rc2-00256-g9c5fef5774 (May 24 2020 - 20:20:43 +0530) Trying to boot from MMC2 mmc_load_image_raw_sector: mmc block read error Trying to boot from MMC1 mmc_load_image_raw_sector: mmc block read error SPL: failed to boot from all boot devices Fixes: 167efc2c7a46 ("arm64: dts: rk3399: Sync v5.7-rc1 from Linux" Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-29arm: dts: meson-gxl: fix USB gadget by adding missing nodes for U-BootNeil Armstrong
The khadas-vim, khadas-vim2, libretech-ac & libretech-*-pc boards were missing DT tweak to enable USB gadget. Add them to their -u-boot.dtsi files and include the right gxl-u-boot.dtsi. Fixes: a19e8a0f03 ("arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot") Reported-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-29arm: dts: khadas-vim3: include meson-g12-common-u-boot.dtsi to enable HDMI ↵Neil Armstrong
output Include the common g12 u-boot tweaks to permit enabling video output tweaks on Khadas VIM3 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-05-28ARM: dts: stm32: Disable SDR104 mode on AV96Marek Vasut
Disable SDR104 mode until we know it is really stable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28ARM: dts: stm32: Repair I2C2 operation on AV96Marek Vasut
The I2C2 uses different pinmux on AV96, use correct pinmux and also add comments about the I2C being present on the "low-speed" expansion connector X6. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28ARM: dts: stm32: Add alternate pinmux for I2C2 pinsMarek Vasut
Add another mux option for I2C2 pins, this is used on AV96 board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-28ARM: stm32: Hog GPIO PF7 high on DHCOR to unlock SPI NOR nWPMarek Vasut
The SPI NOR nWP line is connected to GPIO PF7 on the SoM, pull the GPIO line high by default to clear SPI NOR WP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-27arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236Luka Kovacic
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier implementation of new CRS3xx series boards, based on Marvell Prestera 98DX3236. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-27arm: mvebu: armada-3720-uDPU: fix PHY mode definition to sgmii-2500Jakov Petrina
Commit f49ac7e1c4 switched the default PHY speed to 3.125Gbit to resolve issues with SFP modules. However, U-Boot does not have a "2500base-x" phy-mode. Resolve this by using "sgmii-2500" instead. Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Stefan Roese <sr@denx.de>
2020-05-27arm: mvebu: ds414: add u-boot,dm-pre-reloc to spi0Ezra Buehler
Without this U-Boot-specific property, booting on the Synology DS414 (or DS214+) fails in SPL. The spi0 DT node is not scanned, as a result the SPI flash cannot be found. Signed-off-by: Ezra Buehler <ezra@easyb.ch> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-25Merge tag 'ti-v2020.07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Enable DM_ETH on omap3_logic board - Enable Caches in SPL for K3 platforms - Enable backup boot mode support for J721E - Update the DDR timings for AM654 EVM - Add automated tests for RX-51
2020-05-25armv8: cache_v8: fix mmu_set_region_dcache_behaviourPeng Fan
The enum dcache_optoion contains a shift left 2 bits in the armv8 case already. The PMD_ATTRINDX(option) macro will perform a left shift of 2 bits. Perform a right shift so that in the end we get the correct value. [trini: Reword the commit message] Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-22Merge git://git.denx.de/u-boot-usbTom Rini
- DM support for OMAP - DWC3 fix - Typo fix in eth/r8152
2020-05-22Merge tag 'u-boot-rockchip-20200522' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3288 chromebook veyron support; - Add pcie driver support for rk3399; - other fixes for rk3399 boards
2020-05-22usb: ehci-omap: Add Support for DM_USB and OF_CONTROLAdam Ford
The omap3.dtsi file shows the usbhshost node with two sub-nodes for ohci and ehci. This patch file creates the usbhshost, and pulls the portX-mode information. It then locates the EHCI sub-node, and initializes the EHCI controller with the info pulled from the usbhshost node. There is still more to do since there isn't an actual link between the 'phys' reference and the corresponding phy driver, and there is no nop-xceiv driver yet. In the meantime, the older style reference to CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull the phy out of reset until the phy driver is completed and the phandle reference is made. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-22rockchip: rk3328: rock64 - fix gen3 SPL hangKurt Miller
Use the same approach as ROC-RK3328-CC which enables SPL GPIO, pinctl and regulator support. This allows the gen3 board to boot through SPL and does not break gen2 in the process. Signed-off-by: Kurt Miller <kurt@intricatesoftware.com> Acked-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: spl-boot-order: do not attempt to access fdt if OF_PLATDATAUrja Rannikko
gd->fdt_blob is null if using OF_PLATDATA in SPL, which causes a hang after f0921f5098 ("fdt: Sync up to the latest libfdt"). We use the same test that is used in spl_common_init on whether to call fdtdec_setup to unconditionally avoid linking in the fdt-using code when not necessary and thus reduce SPL size. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: spl: veyron speedy boots from SPIUrja Rannikko
Apparently speedy was forgotten from this list of veyron devices. Fixes: 49105fb7ed ("rockchip: add common spl board file") Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2Jagan Teki
Enable PCIe/M.2 support on - NanoPC-T4 - ROC-RK3399-PC Mezzanine boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-22rockchip: rk3399: enable spl-fifo-mode for sdmmcDeepak Das
adapting commit fa2047c47310 ("rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc") for rk3399. Since mmc to sram can't do dma, add patch to prevent aborts transferring TF-A parts. Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-22ARM: uniphier: remove board_eth_init()Masahiro Yamada
This platform completely migrated to CONFIG_DM_ETH. board_eth_init() is only called from net/eth_legacy.c Remove the legacy hook. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22ARM: uniphier: delete or replace <common.h> includesMasahiro Yamada
<common.h> pulls in a lot of bloat. <common.h> is unneeded in most of places. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: drop #include <log.h> againMasahiro Yamada
I do not understand the changes made to these files by commit f7ae49fc4f36 ("common: Drop log.h from common header"). git show f7ae49fc4f36 -- arch/arm/mach-uniphier/ None of them uses the log function feature. Simply revert the changes made to these files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: drop #include <init.h> again from umc-pxs2.cMasahiro Yamada
I do not understand the change made to this file by commit 691d719db718 ("common: Drop init.h from common header"). git show 691d719db718 -- arch/arm/mach-uniphier/dram/umc-pxs2.c This file does not call or define any functions declared in <init.h> Simply revert the change made to this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: remove #include <net.h> again from micro-support-card.cMasahiro Yamada
I do not understand the changes made to this file by commit 90526e9fbac4 ("common: Drop net.h from common header"). git show 90526e9fbac4 -- arch/arm/mach-uniphier/micro-support-card.c The necessary declaration is already included by <netdev.h> at line 112. It also moved the <dm/of.h> inclusion, but I do not understand the motivation of doing so, either. Simply revert the changes made to this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-22ARM: uniphier: include <asm/system.h> instead of <asm/cache.h> from psci.cMasahiro Yamada
I do not understand the change made to this file by commit 90526e9fbac4 ("common: Drop net.h from common header"). git show 90526e9fbac4 -- arch/arm/mach-uniphier/arm32/psci.c It added <asm/cache.h> while this file does not call the standard cache functions at all. All the uniphier-specific cache functions, uniphier_cache_*() are declared in cache-uniphier.h, which is already included from this file. Including <asm/system.h> is sensible to fix the -Wmissing-prototypes warnings because this file defines psci_cpu_on and psci_system_reset(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22ARM: uniphier: select DM_ETHMasahiro Yamada
drivers/net/smc911x.c has been converted to DM. select DM_ETH to enable it for all the UniPhier platform boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-21Merge git://git.denx.de/u-boot-shTom Rini
- Enable -ffunction-sections / -fdata-sections --gc-sections to SH - RCar Gen3 updates
generated by cgit (git 2.34.1) at 2024-12-26 02:53:29 +0000