summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-03-30board: ls1028ardb: add BOARD_LATE_INIT configYuantian Tang
Select BOARD_LATE_INIT config so that many board works can be done in late init stage. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-26rv1108: Fix boot regressionOtavio Salvador
Since commit 79030a486128 ("rockchip: Add Single boot image (with binman, pad_cat)") the following boot regression is seen: U-Boot 2020.04-rc3-00050-gd16e18ca6c-dirty (Mar 09 2020 - 11:40:07 -0300) Model: Elgin RV1108 R1 board DRAM: 128 MiB initcall sequence 67fd12a0 failed at call 6000b927 (err=-22) This happens because the above commit missed to include the "rockchip-u-boot.dtsi" for rv1108, so include this file like it done for other Rockchip SoC dtsi's. Fixes: 79030a486128 ("rockchip: Add Single boot image (with binman, pad_cat)") Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1Otavio Salvador
In order to make the console pins more robust to noise, activate the pullups and increase its drive strength. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-18Revert "sunxi: psci: avoid error address-of-packed-member"Tomasz Duszynski
Using memcpy() for some MMIO access is generally frowned upon and might break things on some platforms. Allwinner H3, which fails to boot, being an example here. Moreover, fields being accessed are naturally aligned and warnings produced by GCC have been quiesced for some time already by: 53dc8ae ("gcc-9: silence 'address-of-packed-member' warning") That said, it should be okay to revert this commit. This reverts commit 9bd34a69a453d409792e08c00953ce8862145e65. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-03-12Merge tag 'u-boot-stm32-20200310' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp: fix dependency for CONFIG_STM32_ETZPC
2020-03-10Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- DM support for CAxxxx SoCs - eMMC board for presidio-asic - Add defer probe for mmc sdhci - TI SoCs mmc misc update
2020-03-10arm: mediatek: remove unused binman configSam Shih
The binman-option BINMAN_FDT is introduced by this commit: commit 3c10dc95bdd0 ("binman: Add a library to access binman entries") BINMAN_FDT being selected when BINMAN=y that resulting in mt7623 and mt7622 are unable to boot. The root cause of this issue is commit: commit cbd2fba1eca1 ("arm: MediaTek: add basic support for MT7629 boards") select BINMAN=y in all mediatek SoCs, and others mediatek SoCs not expect to use BINMAN_FDT. This patch remove BINMAN=y option when ARCH_MEDIATEK=y and move this to the specify SoCs part config. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-03-10stm32mp: update dependency for STM32_ETZPCPatrick Delaunay
Correct the dependency for STM32 ETZPC protection, linked to SOC STM32MP identified by CONFIG_STM32MP15x and not linked to CONFIG_TARGET_STM32MP1 (no more existing). This patch fix an issue introduced by commit 846254888e2e ("stm32mp1: split board and SOC support for STM32MP15x family"). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-10arm: dts: imx8mq-evk: add phy-reset-gpios for fec1Alifer Moraes
Instead of resetting the ethernet phy through functions in imx8mq_evk.c, let the driver reset the phy via dts description adding a reset duration of 10 ms following atheros 8031's datasheet recommendation. Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-03-09ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dlyMax Krummenacher
The FEC in the i.MX8MM doesn't support this feature. So don't pretend one can use it. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 nodeIgor Opaniuk
Let pinctrl configuration for eMMC node (usdhc1) also be accessible in SPL. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09imx8mm/mn: Add missing root clock entry for ARM core clockFrieder Schrempf
The current implementation in arch/arm/mach-imx/cpu.c uses non-DM code to retrieve the core clock frequency. As the root clock is not listed we currently get: CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Fix this by adding the missing entry, which results in: CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: Makefile: added missing ahab.oOliver Graute
added missing ahab.o in Makefile Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: mx6ul_14x14_evk: configure for 24bpp displayAnatolij Gustschin
Before DM_VIDEO conversion this board used 24bpp display configuration, so use it again. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16Fabio Estevam
Sync the imx6sx-sdb dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09ARM: dts: imx6sx: Sync with kernel 5.4.16Fabio Estevam
Sync the imx6sx dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09imx: remove woodburn boardStefano Babic
Board is not longer used, remove it. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-03-09arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocksFaiz Abbas
Update the dummy clock names to use unique identifiers. Otherwise the previous node just gets overwitten by the next one with the same name. This fixes eMMC boot not working on J721e-evm. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-09arm: K3: sysfw-loader: Add a config_pm_pre_callback()Faiz Abbas
System firmware does not guarantee that clocks going out of the device will be stable during power management configuration. There are some DCRC errors when SPL tries to get the next stage during eMMC boot after sysfw pm configuration. Therefore add a config_pm_pre_callback() to switch off the eMMC clock before power management and restart it after it is done. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementationFaiz Abbas
The call to spl_mmc_get_uboot_raw_sector() completely ignores and overwrites the raw_sect value passed from the caller of spl_mmc_load(). Fix this by passing raw_sect to the function and returning the same value in the default case. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09mmc: am654_sdhci: Update output tap delay writesFaiz Abbas
With the latest RIOT, there is a different otap delay value for each speed mode. Add a new binding with every supported speed mode. Also disable a given speed mode in the host caps if its corresponding otap-del-sel is not present. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-04Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- ABB SECU board - Assorted minor fixes
2020-03-03ARM: socfpga: Add initial support for the ABB SECU boardHolger Brunck
Add initial support for the ABB SECU board, which is an ArriaV-based SoCFPGA system with ethernet and booting from Denali NAND. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-29ARM: dts: uniphier: remove U-Boot own EEPROM compatible and propertyMasahiro Yamada
The compatible string "i2c-eeprom" is U-Boot own compatible, which has never been approved by the DT community. "u-boot,i2c-offset-len" is also a U-Boot own hack. Linux adds "atmel,*" as generic compatibles, and U-Boot also followed it by commit d7e28918aa3f ("i2c_eeprom: Add reading support"). The U-Boot own hack is no longer needed. Just sync with Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada
Import Linux commits: 37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node") e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29ARM: dts: uniphier: rename DT nodes to follow json-schemaMasahiro Yamada
Import the nodename changes I made in Linux for avoiding dt-schama warnings. This follows the $nodename patterns in the dt-schema. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: detect the base of micro support card at run-timeMasahiro Yamada
The base address 0x43f00000 is no longer true for the future SoC. Extract the base address from the device tree. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: remove workaround for the NAND write protectMasahiro Yamada
This workaround was previously needed for LD4, Pro4, sLD8, Pro5 SoCs. The boot ROM does not touch this register for PXs2/LD6b or later. Now that the reset signal of the Denali NAND controller is always asserted in board_init() then deasserted in the driver, the WRITE_PROTECT register gets back to the default value, which means the write protect is deasserted. This workaround can go away entirely. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: move NAND reset assertion to U-Boot proper from SPLMasahiro Yamada
The comment /* deassert reset */ is wrong. It asserts the reset. It no longer needs to stay in SPL. The NAND controller reset is handled in the driver. So, this assert can be moved to the board_init() of U-Boot proper. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-28ARM: uniphier: add sdscript, sdboot, sdupdate environment variablesMasahiro Yamada
Add handy macros: - sdscript: source boot.scr in the file system of the SD media - sdboot : boot the kernel using the images in the file system of the SD media - sdscript: update the boot firmware in the SD media (in raw block sectors) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-25arch: arm: Fix SZ_64K undeclared compilation errorWasim Khan
Macro SZ_64K is undeclared. Include sizes.h to fix the compilation error. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-20Merge tag 'u-boot-rockchip-20200220' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399: split roc-pc-rk3399 out of evb_rk3399 - sync dts from upstream kernel for rk3399,rk3288,px30 - boot_mode: find the saradc device name
2020-02-20arch: arm: rockchip: order the rk3399 entries alphabeticallyPeter Robinson
Put the target entries for rk3399 devices in alphabetical order. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_unmap_single()Masahiro Yamada
dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19dma-mapping: fix the prototype of dma_map_single()Masahiro Yamada
Make dma_map_single() return the dma address, and remove the pointless volatile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19board: roc-pc-rk3399: Add support for onboard LED's and push button to ↵Suniel Mahesh
indicate power mode Added support for onboard LED's and push button. When powered board will be in low power mode(yellow LED), on button press, board enters full power mode (red LED) and boots u-boot. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: boot_mode: find the saradc device nameHugh Cole-Baker
adc_channel_single_shot() requires the full device name e.g. "saradc@ff100000", which differs between Rockchip SoC's, but they all share the prefix "saradc"; find the ADC device with this name prefix and use its full name. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19ARM: dts: rockchip: Sync rk3288-vyasa dts from linuxJagan Teki
Sync rk3288-vyasa dts file from Linux. This sync has changes required to work HDMI output on Vyasa RK3288 board. This sync excludes the io_domains node since it is not available in rk3288.dtsi. Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are not merged to Linux yet but wil resync later if any further updates on this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: rk3288: Enable pre console bufferJagan Teki
Enable pre console buffer for rk3288 platform. This would help to capture the console messages prior to the console being initialised. Enabling this would help to capture all the console messages on video output source like HDMI. So we can find the full console messages of U-Boot proper on HDMI display when enabled it for RK3288 platform boards. Buffer address used for pre console is 0x0f000000 which is ram base plus 240MiB. right now the Allwinner SoC is using similar computation. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: px30: sync the main px30 dtsi from mainlineHeiko Stuebner
There have been multiple peripherals added to the main px30 dtsi in the Linux kernel since its addition to u-boot. So to make it easier to sync board devicetrees, update the core dtsi from Linux. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsiPeter Robinson
Move the U-Boot specific bits to a -u-boot.dtsi include so all the u-boot.dtsi hierarchy is included. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19arm: dts: rockchip: rk3399: Move U-Boot specific bits to rk3399-u-bootPeter Robinson
There's some bits in the U-Boot rk3399.dtsi that aren't yet in the upstream Linux dtsi but are needed for early boot. This moves them to the u-boot.dtsi to make it easier to sync the rest of rk3399.dtsi with upstream. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventionsPeter Robinson
The upstream linux kernel for the Rockchip 3399 SoC use usbdrd3 naming so move the two remaining devices over to that for their device trees to make it easier to sync with upstream DTs. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: make the global board_fit_config_name_match __weakHeiko Stuebner
The core Rockchip spl code contains a default board_fit_config_name_match implementation doing nothing. Individual boards may want to handle this differently, so add a __weak atribute to make it possible to override this function in other places. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rockchip: make_fit_atf: use correct fdt_x references in config nodesHeiko Stuebner
The script iterates over the given devicetrees and creates both fdt_x node as well as a conf-node for each passed dt. But there is a slight bug in that it always references fdt_1 in each conf node instead of the matching fdt_x as expected. So fix that by referencing the number of the current dt similar to how the fdt_x nodes gets created. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-14Merge tag 'u-boot-stm32-20200214' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add DH Electronics DHCOM SoM and PDK2 board - DT alignment with kernel v5.5-rc7 for stm32mp1 boards - fix STM32 image format for big endian hosts in mkimage - solve warnings in device tree and code for stm32mp1 boards - remove fdt_high and initrd_high for stm32 and stih boards - add support of STM32MP15x Rev.Z - update stm32mp1 readme
2020-02-13stm32mp1: support of STM32MP15x Rev.ZPatrick Delaunay
Add support for Rev.Z of STM32MP15x cpu. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32m1: add reg for pll nodesPatrick Delaunay
Fix the following DT dtc warnings for stm32mp1 boards: Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@3: node has a unit name, but no reg property Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2024-12-28 14:55:42 +0000