summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29arm: mach-keystone: Use appended original image size in image processingAndrew F. Davis
When an image is signed/encrypted on K2 devices the image may get padded to meet alignment requirements for the signature/encryption type. The original size is appended as 4 bytes little-endian to the end of the final image. Normally the trailing extra bytes are ignored and so restoring the exact original size is not important. In the case of initrd the original size is important as the kernel uses it to look for additional filesystem data and can do the wrong thing when the size is not correct. Read off the original size and report it back from the image post processing stage. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-29davinci: da850-evm: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29davinci: omapl138-lcdk: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29Merge branch '2019-07-29-master-imports'Tom Rini
- Assorted bug fixes
2019-07-29board: mediatek: Add pumpkin board supportFabien Parent
The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini
- Various gen5 fixes
2019-07-29Merge tag 'video-for-2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
2019-07-29Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29rockchip: rv1108: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
2019-07-29rockchip: rk3288: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Move rk3288_detect_reset_reason to soc fileKever Yang
The rk3288_detect_reset_reason() is per-SoC operation, move it to rk3288.c, and extend the rk_board_late_init() with rk3288_board_late_init() to make all the board works fine as before. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Move clock CMD to SoC fileKever Yang
Move the do_clock CMD to rk3288.c so that we can re-use the common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Move veyron_init() back to veyron.cKever Yang
The veyron_init() should go to its board file veyron.c, and the board_early_init_f() could be the right place. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move board_early_init_f() back to veyronKever Yang
The board_early_init_f() is only used by veyron board now, move it into the board file veyron.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move SOC setting into arch_cpu_init()Kever Yang
Qos setting and emmc relate SoC setting should go to arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3188: Move SoC one time setting into arch_cpu_init()Kever Yang
The setting for noc remap should goto arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk322x: move SoC setting into arch_cpu_init()Kever Yang
The SoC one time setting should go to arch_cpu_init() in rk322x.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3128: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: Migrate to use common board fileKever Yang
Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3036: move dram_init() into soc fileKever Yang
Move dram_init() into rk3036.c so that we can use to common board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: sdram_common: add common dram_init_banksizeKever Yang
dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: add common board file for U-Boot properKever Yang
Add common board file for Rockchip SoCs to avoid too much copy-paste work for different SoCs. This board file in charge for common board_init() and board_late_init() in U-Boot proper. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: clean up board_usb_init() for all SoCsKever Yang
Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: convert to use ROCKCHIP_BOOT_MODE_REG for fastboot tagKever Yang
The fastboot_set_reboot_flag() update a TAG into a register for next boot, use the common macro for the register so that we can re-use the function for different SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add board_debug_uart_init()Kever Yang
Add board_debug_uart_init() to make the debug UART work with correct setting. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: Migrate to use common spl board fileKever Yang
rk3399 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move chromebook bob specific flow to its board fileKever Yang
Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move boot_devices into soc fileKever Yang
Move boot_devices definition into rk3399.c, so that we can share the common code for board_spl_was_booted_from(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399; move spl_board_init() into soc fileKever Yang
Move spl_board_init() into rk3399.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move SoC setting into arch_cpu_init()Kever Yang
SoC setting like DDR secure region and EMMC clock setting should go to arch_cpu_init(). Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: show SPL BANNER earlier in board_init_f()Kever Yang
Show the SPL BANNER earlier so that we know already get into SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3399: move spl_perform_fixups() into soc fileKever Yang
Move the spl_perform_fixups() into rk3399.c so that we can use common spl board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3368: migrate to use common spl board fileKever Yang
rk3368 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3328: migrate to use common spl board fileKever Yang
rk3328 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: add boot_devices mapping to support 'same-as-spl'Kever Yang
The driver need a mapping to get the dts node by boot srouce ID. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"Kever Yang
"u-boot,spl-boot-order" is more flexible and other rockchip SoCs has convert to use it, migrate to use the new dts property. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: phycore: remove no use "u-boot, boot0" in dtsKever Yang
We are using "u-boot,spl-boot-order" now and re-use the definition from rk3288-u-boot.dtsi, so remove it directly here. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: Migrate to use common spl board fileKever Yang
rk3288 has similar boot flow in SPL with other Rockchip SoCs, migrate to use common spl board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move dram_init_banksize() into soc fileKever Yang
Mov edram_init_banksize() into rk3288.c so that we can re-use the common SPL board file later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288-phycore: move phycore_init() to its own board fileKever Yang
phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang
Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-28 11:47:27 +0000