summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-01-27Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-shTom Rini
2018-01-27ARM: dts: rmobile: Add SoC and board U-Boot DT extrasMarek Vasut
Add U-Boot DT extras for each SoC and board. This marks the required nodes with u-boot,dm-pre-reloc to start clock and PRR early on while avoiding modification of the DTs imported from Linux. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27ARM: dts: rmobile: Add rudimentary R8A7790 Stout DTMarek Vasut
The Stout board is not supported in Linux, so add a rudimentary DTS for H2 Stout as a placeholder for when a proper DTS is available. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: The Stout is already being shipped over, so proper DTS for both U-Boot and Linux will happen once it's delivered :-)
2018-01-27ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8Marek Vasut
Import the Renesas R8A7794 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8Marek Vasut
Import the Renesas R8A7793 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8Marek Vasut
Import the Renesas R8A7792 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8Marek Vasut
Import the Renesas R8A7791 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-27ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8Marek Vasut
Import the Renesas R8A7790 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-26Merge git://git.denx.de/u-boot-sunxiTom Rini
2018-01-26ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32Tom Rini
Now that we have and use wait_for_bit_le32() available, the callers of cm_write_with_phase() should not be casting values to u32 and instead we expect a const void *, so provide that directly. Fixes: 48263504c8d5 ("wait_bit: use wait_for_bit_le32 and remove wait_for_bit") Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-26sunxi: imply CONFIG_OF_LIBFDT_OVERLAYAndre Heider
fdt overlay support is useful for all sunxi boards, enable per default and remove it from sunxi defconfigs. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-26Merge git://git.denx.de/u-boot-spiTom Rini
2018-01-26SOCFPGA: clock manager: implement dw_spi_get_clk functionEugeniy Paltsev
Implement dw_spi_get_clk function to override its weak implementation in designware_spi.c driver. We need this change to get rid of cm_get_spi_controller_clk_hz function and clock_manager.h include in designware_spi.c driver. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24ARM: rmobile: Convert CONFIG_R8A77xx to KconfigMarek Vasut
Convert these configuration options to Kconfig, update board defconfigs and drop them from whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24ARM: dts: rmobile: Factor out U-Boot extrasMarek Vasut
Pull out u-boot extras into dtsi files to make synchronization of DTS from Linux kernel as easy as a simple copy. All the U-Boot extras are now in *-u-boot.dts* files instead. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24ARM: dts: rmobile: Update DTS to match Linux 4.14Marek Vasut
Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.14, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . This includes both M3 and H3 ULCB and Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-01-24arm: zynq: Enable SPL_CLK only if SPL is enabledEzequiel Garcia
Setup proper dependency in Kconfig for SPL_CLK. If SPL is not enabled, SPL_CLK shouldn't be selected. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-24dts: cadence_spi: Sync DT bindings with LinuxJason Rush
Adopt the Linux DT bindings and clean-up duplicate and unused values. Fix indentation of the QSPI node in the keystone k2g device tree. Tested on TI K2G platform: Tested-by: Vignesh R <vigneshr@ti.com> Tested on a socfpga-cyclonev board: Tested-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Signed-off-by: Jason Rush <jarush@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Acked-by: Marek Vasut <marex@denx.de>
2018-01-24spi: kirkwood_spi: implement workaround for FE-9144572Chris Packham
Erratum NO. FE-9144572: The device SPI interface supports frequencies of up to 50 MHz. However, due to this erratum, when the device core clock is 250 MHz and the SPI interfaces is configured for 50MHz SPI clock and CPOL=CPHA=1 there might occur data corruption on reads from the SPI device. Implement the workaround by setting the TMISO_SAMPLE value to 0x2 in the timing1 register. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-24wait_bit: use wait_for_bit_le32 and remove wait_for_bitÁlvaro Fernández Rojas
wait_for_bit callers use the 32 bit LE version Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-01-23Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-01-23ARM: dts: Freescale: re-license device tree files under GPLv2+/X11Pankaj Bansal
The current GPL only licensing on the device trees makes it very impractical for other software components licensed under another license. To make it easier to reuse them, re-license the the device trees for Freescale (now NXP) SoCs and boards under GPLv2+/X11 dual license. Same trend is followed in linux. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: York Sun <york.sun@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23common: board_f: vid: Add VID specific API to adjust core voltageRajesh Bhagat
Adds a VID specific API in init_sequence_f and spl code flow namely init_func_vid which is required to adjust core voltage. VID specific code is required in spl, hence moving flag CONFIG_VID out of spl flags. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23board: common: vid: Add support for LTC3882 voltage regulator chipRajesh Bhagat
Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23armv8: lsch3: Add serdes and DDR voltage setupRajesh Bhagat
Adds SERDES voltage and reset SERDES lanes API and makes enable/disable DDR controller support 0.9V API common. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-01-23 This time around we have a lot of EFI patches from Heinrich. Highlights are: - Allow EFI applications to register as drivers - Allow exposure of U-Boot block devices from an EFI payload - Compatibility improvements
2018-01-22Convert CONFIG_SOC_DA8XX et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SOC_DA8XX CONFIG_SOC_DA850 CONFIG_DA850_LOWLEVEL CONFIG_MACH_DAVINCI_DA850_EVM CONFIG_SYS_DA850_PLL_INIT CONFIG_SYS_DA850_DDR_INIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: David Lechner <david@lechnology.com> [trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-22efi_selftest: test start imageHeinrich Schuchardt
This pair of tests checks the StartImage boot service. Each test loads an EFI application into memory and starts it. One returns by calling the Exit boot service. The other returns directly. The tests are not built on x86_64 because the relocation code for the efi binary cannot be created. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-19configs: stm32: move config flag from defconfig to KconfigPatrice Chotard
Move system flags from defconfig to mach-stm32/Kconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19serial: stm32: Rename serial_stm32x7.c to serial_stm32.cPatrice Chotard
Now this driver is used across stm32f4, stm32f7 and stm32h7 SoCs family, give it a generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19ARM: qemu-arm: Add support for AArch64Tuomas Tynkkynen
This adds support for '-machine virt' on AArch64. This is rather simple: we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig symbols, provide the ARMv8 memory map from the board file and add a new defconfig based on the 32-bit defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19arm: mach-omap2: Remove secure certificate name printingAndrew F. Davis
The signing certificate name is always 15 chars long, but need not be null terminated. One solution is then to use printf precision modifiers to only print this many chars ("%.15s"), but tiny printf does not support this, so lets just drop printing the cert name for now. Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-01-19arm: am33xx: security: Fix size calculation on headerMadan Srinivas
Fix the size calculation in the verify boot. The header size should be subtracted from the image size, not be assigned to the image size. Fixes: 0830d72bb9f8 ("arm: am33xx: security: adds auth support for encrypted images") Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoardDerald D. Woods
This commit adds OMAP3 BeagleBoard devicetree files from Linux v4.15-rc5. This includes standard OMAP34XX board revisions as well as the 'xM' which is OMAP36XX. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-19ARM: dts: am574x-idk: Add initial supportLokesh Vutla
Add initial dts support for am574x-idk Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: am57xx: Enable CMD_DDR3Lokesh Vutla
Enable CMD_DDR3 on all am57xx based platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: am574x-idk: Add hw data supportLokesh Vutla
Update prcm, voltages and pinmux support for am574x-idk. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19arm: dra762: Add support for device package identificationLokesh Vutla
DRA762 comes in two packages: - ABZ: Pin compatible package with DRA742 with DDR@1333MHz - ACD: High performance(OPP_PLUS) package with new IPs Both the above packages uses the same IDCODE hence needs to differentiate using package information in DIE_ID_2. Add support for the same. Also update clock, ddr, emif information. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19cmd: ti: Generalize cmd_ddr3 commandLokesh Vutla
Keystone and DRA7 based TI platforms uses same EMIF memory controller. cmd_ddr3 command is customized for keystone platforms, make it generic so that it can be re used for DRA7 platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19arm: keystone: Move cmd_ddr3 to a common placeLokesh Vutla
Move cmd_ddr3 to cmd/ti in order to make it build for non-keystone TI platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Rename to ddr3.c not cmd_ddr3.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-19arm: emif-common: Add suppport for enabling ECCLokesh Vutla
For data integrity, the EMIF1 supports ECC on the data written or read from the SDRAM. Add support for enabling ECC support in EMIF1. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
2018-01-19arm: emif-common: Add ecc specific emif registersLokesh Vutla
This is a slight difference in emif_ddr_phy_status register offsets for DRA7xx EMIF and older versions. And ecc registers are available only in DRA7xx EMIC. Add support for this difference and ecc registers. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19drivers: dma: ti-edma3: add support for memory fillTero Kristo
Add support for simple memory fill operation. With large data sizes it is much faster to use EDMA for memory fill rather than CPU. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-01-19arm: am33xx: Avoid writing into reserved DPLL dividerLokesh Vutla
DPLL DRR doesn't have an M4 divider. But the clock driver is trying to configure M4 divider as 4(writing into a reserved register). Fixing it by making M4 divider as -1. Reported-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s supportRex Chang
Added support for K2G EVM with FlipChip SoC of which ARM/DDR3 runs at 1GHz/1066 MT/s. The patch is also backward compatible with old revision EVM and EVM with WireBond SoC. Their ARM/DDR3 run at 600MHz/800 MT/s. The new SoC supports 2 different speeds at 1GHz and 600MHz. Modyfied the CPU Name to show which SoC is used in the EVM. Modified the DDR3 configuration to reflect New SoC supports 2 different CPU and DDR3 speeds, 1GHz/1066MT and 600MHz/800MT. Added new inline function board_it_k2g_g1() for the new FlipChip 1GHz, and set the u-boot env variable board_name accordingly. Modified findfdt script in u-boot environment variable to include new k2g board type. Signed-off-by: Rex Chang <rchang@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVMVignesh R
MCAN can be accessed via DCAN1 or DCAN2. Determining which DCAN instance to use if any at all is done through CTRL_CORE_CONTROL_SPARE_RW.SEL_ALT_MCAN. Since general pinmuxing is handled in U-boot. Handle this additional pinmuxing requirement in U-boot to ensure that MCAN is used by default via the DCAN1 pins. Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> [fcooper@ti.com: Update commit message and use DCAN1 not DCAN2 for MCAN] Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-01-19mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bitKishon Vijay Abraham I
omap_hsmmc driver uses "|" in a couple of places for disabling a bit. While it's okay to use it in "mmc_reg_out" (since mmc_reg_out has a _mask_ argument to take care of resetting a bit), it's incorrectly used for resetting flags in "omap_hsmmc_send_cmd". Fix it here by using "&= ~()" to reset a bit. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19mmc: omap_hsmmc: Add support for DMA (ADMA2)Kishon Vijay Abraham I
The omap hsmmc host controller can have the ADMA2 feature. It brings better read and write throughput. On most SOC, the capability is read from the hl_hwinfo register. On OMAP3, DMA support is compiled out. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-18omap: Update the base address of the MMC controllersJean-Jacques Hiblot
Align the base address defined in header files with the base address used in the DTS. This will facilitate the introduction of the DMA support. Of all HSMMC users, only omap3 doesn't have the 0x100 reserved region at the top. This region will be used to determine if the controller supports DMA transfers Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-18Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"Jean-Jacques Hiblot
This reverts commit 46831c1a4cda75d92f7ad18d4e2b1eb196c62b2f. This reserved area at the beginning of struct hsmm, will be used later to support ADMA Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-25 08:10:13 +0000