summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2018-10-22imx8: add iomux configuration apiPeng Fan
Add iomux configuration api. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: cpu: add uclass based CPU driverAnatolij Gustschin
print_cpuinfo() in board init code requires uclass CPU driver, add it to be able to display CPU info when CONFIG_DISPLAY_CPUINFO option is enabled. CPU node in DT will have to include 'clocks' and 'u-boot,dm-pre-reloc' properties for generic print_cpuinfo() to work as expected. The driver outputs info for i.MX8QXP Rev A and Rev B CPUs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx8: cpu: add function for reading FEC MAC from fuseAnatolij Gustschin
FEC driver requires imx_get_mac_from_fuse(). Add it in preparation for ENETx support. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2018-10-22imx8: add arch_cpu_init arch_cpu_init_dmPeng Fan
Add arch_cpu_init(_dm) mainly to open the channel between ACore and SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add mmu and dram related functionsPeng Fan
Add mmu memmap, some memory regions are reserved by M4, Arm Trusted Firmware, so need to get memreg using SCFW API and setup the memmap. Add dram_init, dram_init_banksize, get_effective_memsize functions, according to the memreg. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: implement mmc_get_env_devPeng Fan
Implement mmc_get_env_dev for i.MX8. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add boot device detectionPeng Fan
Add get_boot_device to detect boot device. Add print_bootinfo to print the boot device info. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add basic cpu supportPeng Fan
Add basic cpu support, including cpu revision, cpu type, cpu core detection. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22armv8: add cpu core helper functionsPeng Fan
Add helper functions to identify different armv8 variants. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx: add i.MX8 cpu typePeng Fan
Add i.MX8 cpu type and is_imx8/is_imx8qxp help macros. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP definedPeng Fan
Include i.MX8QXP pin header when CONFIG_IMX8QXP defined, if no SoC macro defined, report error. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add imx-regs header filePeng Fan
Add imx-regs header file to include the register base definition Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx: boot_mode: Add FLEXSPI boot entryPeng Fan
i.MX8 support FLEXSPI boot support. So add FLEXSPI boot entry. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22misc: imx8: add scfw api impementationPeng Fan
Add clk/misc/pad/pm/rm scfw api implementaion for different drivers to invoke. The low level code is using misc_call to invoke imx8_scu driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22arm: global_data: add scu_dev for i.MX8Peng Fan
Add scu_dev for i.MX8, this will be used as a handle to communite with SCU from A35. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22arm: build mach-imx for i.MX8Peng Fan
Build mach-imx for i.MX8 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx: add Kconfig entry for i.MX8QXPPeng Fan
Add Kconfig entry for i.MX8QXP Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-22imx8: add scfw macro definitionPeng Fan
Add SCFW macro definition. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-19Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XXAdam Ford
This value is unly used in arch/arm/mach-omap2/am33xx/ clock_am33xx.c, so let's make it dependent on AM33XX since that is the only way this file gets compiled into the code according to the Makefile. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix symbol name] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19arm: lpc32xx: remove phantom CONFIG_LPC32XX_SDRAM_ config optionVladimir Zapolskiy
The option has never existed and config whitelist script accumulates it from a comment block, wipe it out from the source code. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-18ARM: rmobile: Drop PRR syscon driverMarek Vasut
The PRR syscon driver is available too late for Multi DTB build of U-Boot. Replace it with simple check whether a platform is Gen3 or not and produce an address of the PRR. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: Build -u-boot variants of DTsMarek Vasut
Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: r8a77990: Add USB2.0(EHCI) DT nodes on EbisuHiroyuki Yokoyama
Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Enable cache command on Gen3Hiroyuki Yokoyama
This patch enables the cache command, mostly for convenience of testing. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-17Merge tag 'signed-efi-2018.11' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-10-17 A few bug fixes for the 2018.11 release: - Fix block seeking on 32bit - Fix execution with DEBUG set - Fix a few Coverity found bugs - Fix warnings Heinrich Schuchardt (13): efi_loader: fix relocation on x86_64 efi_loader: correct signature of GetPosition, SetPosition efi_loader: execute efi_save_gd() first efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...) efi_loader: error handling in read_console() efi_loader: return type efi_console_register() efi_loader: superfluous statement in is_dir() efi_loader: memory leak in efi_set_variable() efi_loader: remove lcd.h from efi_net.c arm: do not include efi_loader.h twice efi_loader: fix typo in efi_boottime.c efi_selftest: creating new handle in controller test efi_loader: efi_dp_get_next_instance() superfluous statement Tom Rini (2): efi_loader: Fix warning in efi_load_image() fs: fat: Fix warning in normalize_longname()
2018-10-16arm64: zynqmp: Enable MP by default via KconfigMichal Simek
Simplify defconfig for ZynqMP but keep option not to enable it for mini targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Add new command for TCM initializationSiva Durga Prasad Paladugu
This patch adds new zynqmp command "zynqmp tcminit mode" to initialize TCM. TCM needs to be initialized before accessing to avoid ECC errors. This new command helps to perform the same. It also makes tcm_init() as global and uses it for doing the TCM initialization. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Move TCM initialization to a separate routineSiva Durga Prasad Paladugu
This patch moves TCM initialization to a separate routine to make it modular and can be reused if required. It also prints warning message now as it writes to TCM. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add Xilinx Versal Virtual QEMU boardMichal Simek
Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add support for new Xilinx Versal ACAPsMichal Simek
Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: do not include efi_loader.h twiceHeinrich Schuchardt
We should not include the same include twice. Fixes: 99b8db7291ce ("arm: print information about loaded UEFI images") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16arm64: gic: Do gicv3 secure initialization based on EL levelMichal Simek
Do gic cpu initialization based on EL level which u-boot enters. U-Boot can't access EL3 regs when runs in EL2/EL1, etc. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add efuse node for Zynq-7000S devicesMichal Simek
Add access to efuse for Zynq-7000S device detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add support for DLC20 boardMichal Simek
Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: mx5: Add M53Menlo boardMarek Vasut
Add Menlosystems M53 board, based on the M53 SoM. This board has Ethernet, USB host, USB gadget, UART and LCD on it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-16arm: mx5: Add LDB clock config codeMarek Vasut
Add code to configure PLL4, from which the LDB clock are directly derived. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-16arm: imx: mx5: Make videoskip available on MX5Marek Vasut
The board_video_skip() implementation in imx-common/video.c works on i.MX5x as well, so loosen the SoC filter in Makefile to make it available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2018-10-12Merge git://git.denx.de/u-boot-sunxiTom Rini
[trini: Convert da850evm_nand defconfig now to to SPL_DM] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-10Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-10arm: remove duplicated prototypes in u-boot.arm.hPatrick Delaunay
Remove the function prototypes duplicated between u-boot.arm.h and init.h/common.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for get_timer_maskedPatrick Delaunay
The interruption support had be removed for ARM architecture and the function get_timer_masked() is no more used except in some the timer.c files. This patch clean each timer.c which implement this function and remove the associated prototype in u-boot-arm.h For timer.c, I don't verify if the weak version of get_timer (in lib/time.c) can be used Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for udelay_maskedPatrick Delaunay
The interruption support had be removed for ARM architecture and the function udelay_masked() is no more used except in some timer.c files and have the same content than udelay() or __udelay(). This patch update each timer.c implementing this function and remove the associated prototype in u-boot-arm.h. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for reset_timer_maskedPatrick Delaunay
Remove prototype for function only used in one file Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: remove prototype for arch_interrupt_initPatrick Delaunay
Remove prototype for no more existing function Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-10-10arm: K3: am654: Add support for getting boot modeAndrew F. Davis
Read the boot mode register to find the boot mode. Only use eMMC boot0 mode when the mode is eMMC boot (called BOOT_DEVICE_MMC1 currently due to current conflating of boot mode and boot device), and not iff the boot device is MMC port 0. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-10-10arm: K3: am654: Choose MMC boot device based on boot portAndrew F. Davis
For most devices the boot mode maps directly to the boot device. For MMC this is not the case as we have two MMC boot modes and two MMC boot devices (ports). Check the boot port to determine which MMC device was our boot device. Make this change for both primary and secondary boot modes. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-10-10gpio: da8xx: Push generic defines of gpio.h out of mach-davinciKeerthy
Push generic defines of gpio.h out of mach-davinci to drivers/gpio now that non-davinci architectures are beginning to use this IP. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix calimain build] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-10ARM: meson: Add Khadas VIM2 board supportLoic Devulder
This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit (git 2.34.1) at 2025-02-24 00:24:46 +0000