summaryrefslogtreecommitdiff
path: root/arch/microblaze
AgeCommit message (Collapse)Author
2012-11-07microblaze: Flush caches before enabling themMichal Simek
Flushing caches is necessary because of soft reset which doesn't clear caches. Signed-off-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Marek Vasut <marex@denx.de>
2012-11-07microblaze: Fix byteorder for microblazeMichal Simek
Just remove ancient code. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net> Reviewed-by: Marek Vasut <marex@denx.de>
2012-11-07microblaze: Fix compilation warning in ext2_find_next_zero_bitMichal Simek
ext2_find_next_zero_bit must be also static if __swab32 is also static. Warning: include/asm/bitops.h:369:22: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static [enabled by default] Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-10-22common: Discard the __u_boot_cmd sectionMarek Vasut
The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22common: Add .u_boot_list into all linker filesMarek Vasut
Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-19microblaze: Change bi_baudrate and global data baudrate to intSimon Glass
These don't need to be longs, so change them. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
2012-09-11microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASEMichal Simek
Prepare for device-tree driven configuration. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11microblaze: Clean microblaze initializationMichal Simek
Move board specific function to board_init function in board/ folder Remove externs from generic board.c Use board_init_f function in board.c file. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11microblaze: timer: Prepare for device-tree initializationMichal Simek
Fix CONFIG_SYS_HZ usage in board config. Do not use hardcoded value. Use CONFIG_SYS_HZ instead. Separate static configuration to single block. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-09-11microblaze: intc: Coding style cleanupMichal Simek
Just coding style cleanup. Remove unneeded externs. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11microblaze: intc: Registering interrupt should return valueMichal Simek
Return value to find out if un/registration was succesful. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-09-11microblaze: board: Remove compilation warningMichal Simek
Variable is used when CONFIG_SYS_FLASH_CHECKSUM is used. Warning log: board.c: In function 'board_init': board.c:101: warning: unused variable 's' Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net>
2012-09-11microblaze: Add support for device tree driven board configurationMichal Simek
This is minimum code required to be able to use device-tree for u-boot initialization. Currently only for device driver initialization. Linker script change ensures DTB to be aligned for both options CONFIG_OF_EMBED and CONFIG_OF_SEPARATE. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Stephan Linz <linz@li-pro.net> CC: Simon Glass <sjg@chromium.org>
2012-08-09global_data: unify global flag definesMike Frysinger
All the global flag defines are the same across all arches. So unify them in one place, and add a simple way for arches to extend for their needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-10microblaze: intc: Clear interrupt codeMichal Simek
Clear and prepare for device-tree driven configuration. Remove CONFIG_SYS_INTC_0 definition Use dynamic allocation instead of static. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
2012-07-10microblaze: Call serial multi initializationMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
2012-07-10microblaze: Move __udelay implementationMichal Simek
Move __udelay to the timer code because of unification. And clean coding style because of checkpatch.pl. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
2012-07-10microblaze: Remove extern from board.cMichal Simek
eth_init() is defined at include/net.h. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
2012-07-09microblaze: Move individual board linker scripts to common script in cpu tree.Michal Simek
Unification for all microblaze boards. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-07-09microblaze: Add gpio.hMichal Simek
Gpio support is not implemented yet. Adding it because of fdtdec. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-05-15net: move bootfile init into eth_initializeMike Frysinger
All arches init this the same way, so move the logic into the core net code to avoid duplicating it everywhere else. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15net: punt bd->bi_ip_addrMike Frysinger
This field gets read in one place (by "bdinfo"), and we can replace that with getenv("ipaddr"). After all, the bi_ip_addr field is kept up-to-date implicitly with the value of the ipaddr env var. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-03-18bootstage: Replace show_boot_progress/error() with bootstage_...()Simon Glass
These calls should not be made directly any more, since bootstage will call the show_boot_...() functions as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()Simon Glass
This changes the number 15 as used in boot_stage_progress() to use the new name provided for it. This is a separate patch because it touches so many files. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-02-23microblaze: avoid interrupt race conditionsStephan Linz
The interrupt acknowledge action have to run after the registered interrupt handler. So we have a chance to bear out the corresponding interrupt request in the corresponding controller hardware. With this reordering, we optain a proper interrupt handling for level triggered interrupt sources -- for example the new axi_timer v1.02.a introduced in ISE 13.2. Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Michal Simek <monstr@monstr.eu>
2012-02-23microblaze: fix build failure due to undefined reference to `get_ticks'Stephan Linz
after commit "common: add possibility for readline_into_buffer timeout" (sha1:9c34831) was applied. The Microblaze generic build fails with error below: common/libcommon.o: In function `cread_line': /devel/u-boot/common/main.c:717: undefined reference to `get_ticks' /devel/u-boot/common/main.c:717: undefined reference to `get_tbclk' /devel/u-boot/common/main.c:720: undefined reference to `get_ticks' Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Michal Simek <monstr@monstr.eu>
2011-10-24microblaze: Fix strict-aliasing rules for in_be32Michal Simek
readl should work with unsigned int instead of unsigned long. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23microblaze: Use getenv_ulong() in place of getenv(), strtoulSimon Glass
This changes the board code to use the new getenv_ulong() function. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-23microblaze: cache: define ARCH_DMA_MINALIGN for DMA buffer alignmentAnton Staaf
Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Michal Simek <monstr@monstr.eu>
2011-10-10microblaze: Copy bootfile from variablesMichal Simek
Setup bootfile. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-10microblaze: Fix unaligned.h for endiansMichal Simek
Also support little endian MB. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-10microblaze: Initialize jumptable and consoleMichal Simek
This changes were done to get support for netconsole. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-10microblaze: Support flashes on lower addressesMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-10microblaze: Call common console_init_f initialization functionMichal Simek
Calling console_init_f enables CTRL+C usage. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-05image: push default arch values to arch headersMike Frysinger
This pushes the ugly duplicated arch ifdef lists we maintain in various image related files out to the arch headers themselves. Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Tested-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05console: Implement pre-console bufferGraeme Russ
Allow redirection of console output prior to console initialisation to a temporary buffer. To enable this functionality, the board (or arch) must define: - CONFIG_PRE_CONSOLE_BUFFER - Enable pre-console buffer - CONFIG_PRE_CON_BUF_ADDR - Base address of pre-console buffer - CONFIG_PRE_CON_BUF_SZ - Size of pre-console buffer (in bytes) The pre-console buffer will buffer the last CONFIG_PRE_CON_BUF_SZ bytes Any earlier characters are silently dropped.
2011-10-03microblaze: Clean up reset asm codeMichal Simek
- Remove code copying - Reset address is setup from first stage bootloader - Support reset vector setup on little endian Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03microblaze: Save and restore first unused vectorMichal Simek
Use one memory space to detect little/big endian platforms. The first unused address(0x28) is used instead 0x0 address (reset vectors). Detection rewrited reset vector setup from first stage bootloader. Workflow: 1. Store 0x28 to r7 2. Do little/big endian test 3. Restore r7 to 0x28 Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03microblaze: Setup MB vectors if feature is enable for u-bootMichal Simek
For example: Setup reset vectors if reset address is setup. Setup user exception vector if user exception is enabled Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-03microblaze: Remove debug saving valueMichal Simek
Forget to remove debug code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-28unify version_stringAndreas Bießmann
This patch removes the architecture specific implementation of version_string where possible. Some architectures use a special place and therefore we provide U_BOOT_VERSION_STRING definition and a common weak symbol version_string. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Mike Frysinger <vapier@gentoo.org> CC: Peter Pan <pppeterpppan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26Timer: Remove reset_timer() for non-Nios2 archesGraeme Russ
2011-07-26Timer: Remove set_timer completelyGraeme Russ
2011-04-12Make STANDALONE_LOAD_ADDR configurable per boardWolfgang Denk
Rename STANDALONE_LOAD_ADDR into CONFIG_STANDALONE_LOAD_ADDR and allow that the architecture-specific default value gets overwritten by defining the value in the board header file. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Tsi Chung Liew <tsi-chung.liew@freescale.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-15microblaze: Fix msr handling in interrupt_handlerMichal Simek
Fix ancient code which worked with MSR in a bad way. Use rtid instruction which enable IRQs and jump. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-15microblaze: Fix systems with MSR=0Michal Simek
u-boot BSP generates XILINX_USE_MSR_INSTR macro even for system with MSR=0. That's why explicitly check that MSR=1. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-19Replace "FLASH" strings with "Flash" or "flash"Peter Tyser
There's no compelling reason to have the output on bootup or the "flinfo" command print "flash" in uppercase, so use the proper case where appropriate. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2011-01-10microblaze: Fix bd_info pointerMichal Simek
Patch "Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value" (sha1: 25ddd1fb0a2281b182529afbc8fda5de2dc16d96) introduce GENERATED_GBL_DATA_SIZE which is sizeof aligned gd_t (currently 0x40). Microblaze configs used 0x40(128) because this place also contained board info structure which lies on the top of ram. U-Boot is placed to the top of the ram (for example 0xd7ffffff) and bd structure was moved out of ram. This patch is fixing this scheme with GENERATED_BD_INFO_SIZE which swap global data and board info structures. For example: Current: gd 0xd7ffffc0, bd 0xd8000000 Fixed: gd 0xd7ffffc0, bd 0xd7ffff90 Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-10microblaze: Disabling interrupt should return 1 if was enabledMichal Simek
Microblaze implement enable/disable interrupts through MSR that's why disable_interrupts function should return 1 when interrupt was enabled. Return 0 when interrupt was disabled. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Wolfgang Denk <wd@denx.de>
generated by cgit (git 2.34.1) at 2025-02-02 01:10:39 +0000