summaryrefslogtreecommitdiff
path: root/arch/mips/lib/bootm.c
AgeCommit message (Collapse)Author
2015-04-24MIPS: implement device-tree handover to Linux kernelDaniel Schwierzeck
Add device-tree handover to Linux kernel conforming with MIPS UHI [1]. Register $a0 will be set to the reserved value -2. The address of the device-tree blob will be stored as KSEG0 address in $a1. $a2 and $a3 are set to zero. [1] http://prplfoundation.org/wiki/MIPS_documentation Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21MIPS: bootm: add bootstage reportingDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21MIPS: bootm: prepare a flattened device tree for the kernelDaniel Schwierzeck
Add the initial code to prepare a flattened device tree for the kernel like relocating the FDT blob and fixing up the /chosen and /memory nodes. The final hand over to the kernel is not yet implemented. After the community agreed on the MIPS boot interface for device trees, the corresponding code will be added. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21MIPS: bootm: add mem, rd_start and rd_size to kernel command lineDaniel Schwierzeck
If the user wants to boot a kernel without legacy environment, information like memory size, initrd address and size should be handed over to the kernel in the command line. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21MIPS: bootm: refactor preparation of Linux kernel environmentDaniel Schwierzeck
Move preparation of Linux kernel environment in a separate function and mark it as legacy. Add a Kconfig option to make that legacy mode configurable. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21MIPS: bootm: refactor preparation of Linux kernel command lineDaniel Schwierzeck
Move preparation of Linux kernel command line in a separate function and mark it as legacy. Add a Kconfig option to make that legacy mode configurable. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-11-27MIPS: bootm: remove unused or redundant header filesDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-11-27MIPS: bootm: add missing initramfs relocationDaniel Schwierzeck
The initramfs is currently only relocated if the user calls the bootm ramdisk subcommand. If bootm should be used without subcommands, the arch-specific bootm code needs to implement the relocation. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-11-26mips: don't hardcode Malta env baudratePaul Burton
The baudrate passed to Linux in the environment was hardcoded at 38400. Instead pass the correct baudrate from global data, allowing Linux to correctly inherit the baudrate used by U-boot when console setup is not explicitly specified. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-11-09qemu-malta: rename to just "malta"Paul Burton
This is in preparation for adapting this board to function correctly on a physical MIPS Malta board. The board is moved into an "imgtec" vendor directory at the same time in order to ready us for any other boards supported by Imagination in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-08-13MIPS: bootm: add YAMON style Linux preparation/jump code for Qemu MaltaDaniel Schwierzeck
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: add support for generic relocation of init ramdisksDaniel Schwierzeck
All linux kernels after v2.6 require a page-aligned location of an external init ramdisk. Enable CONFIG_SYS_BOOT_RAMDISK_HIGH to support this with the generic U-Boot relocation code. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: refactor initialisation of kernel environmentDaniel Schwierzeck
Move initialisation of Linux environment to separate functions. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: refactor initialisation of kernel cmdlineDaniel Schwierzeck
Move initialisation of Linux command line to separate functions. Also add support for bootm subcommand 'cmdline'. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: add support for LMBDaniel Schwierzeck
This is required for init ramdisk relocation and device tree support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: optimize kernel entry callDaniel Schwierzeck
Fix signature of kernel entry function. Mark the kernel entry with __noreturn for better code optimisation. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-08-13MIPS: bootm: fix checkpatch.pl warningsDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-01-16MIPS: bootm.c: add support for 'prep' and 'go' subcommandsGabor Juhos
The bootm command supports subcommands since long time however those subcommands are not yet usable on MIPS. The patch is based on the ARM implementation, and it adds support for the 'prep' and 'go' subcommands only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16MIPS: bootm.c: separate environment initializationGabor Juhos
Move the environment initialization code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16MIPS: bootm.c: separate linux jump codeGabor Juhos
Move the actual jump code into a separate function. This make the code reusable for bootm subcommands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-01-16MIPS: bootm.c: use debug macro to print debug messageGabor Juhos
The '## Transferring control ...' message is printed only if DEBUG is enabled. Get rid of the 'ifdef DEBUG' statement and use the debug macro instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
2012-06-03MIPS: bootm.c: make checkpatch.pl cleanDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2012-03-18bootstage: Replace show_boot_progress/error() with bootstage_...()Simon Glass
These calls should not be made directly any more, since bootstage will call the show_boot_...() functions as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()Simon Glass
This changes the number 15 as used in boot_stage_progress() to use the new name provided for it. This is a separate patch because it touches so many files. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04Make sure that argv[] argument pointers are not modified.Wolfgang Denk
The hush shell dynamically allocates (and re-allocates) memory for the argument strings in the "char *argv[]" argument vector passed to commands. Any code that modifies these pointers will cause serious corruption of the malloc data structures and crash U-Boot, so make sure the compiler can check that no such modifications are being done by changing the code into "char * const argv[]". This modification is the result of debugging a strange crash caused after adding a new command, which used the following argument processing code which has been working perfectly fine in all Unix systems since version 6 - but not so in U-Boot: int main (int argc, char **argv) { while (--argc > 0 && **++argv == '-') { /* ====> */ while (*++*argv) { switch (**argv) { case 'd': debug++; break; ... default: usage (); } } } ... } The line marked "====>" will corrupt the malloc data structures and usually cause U-Boot to crash when the next command gets executed by the shell. With the modification, the compiler will prevent this with an error: increment of read-only location '*argv' N.B.: The code above can be trivially rewritten like this: while (--argc > 0 && **++argv == '-') { char *arg = *argv; while (*++arg) { switch (*arg) { ... Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-04-13Move lib_$ARCH directories to arch/$ARCH/libPeter Tyser
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk This change is intended to clean up the top-level directory structure and more closely mimic Linux's directory organization. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
generated by cgit (git 2.34.1) at 2025-01-06 06:28:06 +0000