summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2019-01-16mips: luton: DT: Add pcb090Lars Povlsen
This prepares individual device trees for MSCC luton-based reference boards - pcb090 and pcb091. Note: Even though the devices trees are quite common, they will differ significantly in coming patches. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: mscc: Add generic GPIO control utility functionLars Povlsen
The GPIO control function can be used for controlling alternate functions associated with a GPIO. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: mscc: Add generic PHY MIIM utility functionsLars Povlsen
The PHY MIIM utility functions can/will be used for board detection purposes. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2018-12-19mips: jz47xx: Add Creator CI20 platformPaul Burton
Add support for the Creator CI20 platform based on the JZ4780 SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: jz47xx: Add JZ4780 SoC supportPaul Burton
Add initial support for the Ingenic JZ47xx MIPS SoC. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19mips: Add SPL headerPaul Burton
Add header with SPL boot mode and type definitions. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2018-12-19MSCC: add board support for the Luton based evaluation boardGregory CLEMENT
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add board support for the Ocelots based evaluation boardsGregory CLEMENT
Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Luton SoCsGregory CLEMENT
As the Ocelots SoCs, this family of SoCs are found in the Microsemi Switches solution. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Ocelot SoCsGregory CLEMENT
This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: Allow to prefetch and lock instructions into cacheGregory CLEMENT
This path add a new helper allowing to prefetch and lock instructions into cache. This is useful very early in the boot when no RAM is available yet. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: move create_tlb() in an proper header: mipsregs.hGregory CLEMENT
Export create_tlb() as an inline function in mipsregs.h. It allows to remove the declaration of the function from the board files. Then it will allow also to use this function very early in the boot when the stack is not usable. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MIPS: remove local_irq_[save|restore] from CP0 macrosDaniel Schwierzeck
With moving write_on_tlb() to arch/mips/include/asm/mipsregs.h there are now compiler warnings when some generic code includes asm/io.h. This happens for example when enabling OF live tree. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issuesStefan Roese
It has been noticed, that sometimes the d-cache is not in a "clean-state" when U-Boot is running on MT7688. This was detected when using the ethernet driver (which uses d-cache) and a TFTP command does not complete. Flushing the complete d-cache (again?) here seems to fix this issue. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: xilfpga: fix DTC warningsDaniel Schwierzeck
This fixes following DTC warning: arch/mips/dts/nexys4ddr.dtb: Warning (compatible_is_string_list): /ethernet@10e00000/mdio/phy@1:compatible: property is not a string list As upstream DTS in Linux doesn't have the offending property, simply remove it to fix the warning. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19mips: ath79: fix DTC warningsDaniel Schwierzeck
Remove all interrupt nodes that cause warnings regarding a missing interrupt parent. There are no interrupt controller nodes defined and the device trees don't match the ones in Linux anymore. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19bmips: enable ar-5315u enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6318: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable vr-3032u enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm63268: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable dgnd3700v2 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6362: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable ar-5387un enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6328: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable wap-5813n enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6368: add support for bcm6368-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable nb4-ser enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable hg556a enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6358: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable ct-5361 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6348: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: enable f@st1704 enet supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6338: add support for bcm6348-enetÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6318: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm63268: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6362: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6328: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6368: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6358: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6348: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19bmips: bcm6338: add bcm6348-iudma supportÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-10bmips: bcm6838: fix device tree warningÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-10bmips: swapping IO space isn't requiredÁlvaro Fernández Rojas
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-30mips: mt7628: Change compatible property of the ethernet DT nodeStefan Roese
As the driver has been changed to be more specific, the DT compatible property also needs to be adapted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-20MIPS: drop asm/const.hBaruch Siach
Commit 86f21c96f467368 (mips: Use common _AC macro now.) removed the _AC definition from const.h. All other macros defined in const.h are not used anywhere, and there is now no user of this header. Remove this header. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-20Use _AC and UL macros from linux/const.hBaruch Siach
Drop the _AC and UL macros from common.h. Linux headers is the original source of this macro, so keep its definition in the same header. Update existing users of these macros to include const.h directly. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Rick Chen <rick@andestech.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-11-18MIPS: fix linking of standalone programsDaniel Schwierzeck
Use the global MIPS specific u-boot.lds for linking standalone programs instead of the outdated ones in examples/standalone/. Also pass --gc-sections in LDFLAGS_STANDALONE to optimize the size of standalone programs. Finally remove the deprecated config.mk files in arch/mips/cpu/mips[32,64]/. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18Kbuild: add LDFLAGS_STANDALONEDaniel Schwierzeck
Introduce a new Makefile variable for passing LDFLAGS to standalone programs. Currently the variable CONFIG_STANDALONE_LOAD_ADDR is misued on some archs to pass a specific linker script. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2018-11-18mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfigStefan Roese
These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI support - Enable GPIO support - Change max image size from 0x40000 to 0x80000 A note about the baudrate change: The original Mediatek U-Boot version used 57600 baud. Lets move to a more common and faster speed of 115200 baud. And remove the "console=" property from the DT as its not needed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfigStefan Roese
These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI NOR and NAND support - Change MTD_UBI_BEB_LIMIT to 22 - Enable MTD Support - Enable GPIO support - Enable watchdog support - Enable bootcounter support - Enable version variable - Change max image size from 0x80000 to 0xa0000 - Change SYS_MALLOC_LEN to 16MiB (because of UBI/UBIFS) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-25 17:08:15 +0000