summaryrefslogtreecommitdiff
path: root/arch/nios2
AgeCommit message (Collapse)Author
2015-11-12nios2: add 10m50 devboard supportThomas Chou
Add 10m50 devboard support. It is based on the Golden Hardware Reference Design (GHRD), available at, http://rocketboards.org/foswiki/view/Documentation/ AlteraMAX1010M50RevCDevelopmentKitLinuxSetup Though we supported only one nios2-generic board in the past. Now, with the removal of the nios2-generic board dir, adding new nios2 boards to u-boot is easier than before. It should be helpful to add those boards supported in Linux mainline. There are only two such nios2 boards, the 3c120 devboard and 10m50 devboard. The nios2-generic is actually 3c120, and should restore the name. The 10m50 is this one. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-11-12nios2: add memcpy_fromio and memcpy_toioThomas Chou
Add memcpy_fromio() and memcpy_toio(). Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-10Various Makefiles: Add SPDX-License-Identifier tagsTom Rini
After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-06Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini
2015-11-06nios2: fix cached mode in clearing the BSSThomas Chou
As the generic board runs in cached mode, it should not use "stwio" which bypass the cache. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06nios2: remove CONFIG_SYS_INIT_SP macroThomas Chou
Remove CONFIG_SYS_INIT_SP macro, as the initial stack is set to below the u-boot code. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Chin Liang See <clsee@altera.com>
2015-11-06nios2: change virt_to_phys to use physaddr_mask in global dataThomas Chou
As virt_to_phys() is used a lot in DMA transfer, change it to use physaddr_mask in global data. This will save an "if" statement and get a little faster. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-11-06nios2: remove the useless parenthesis in asm/io.hThomas Chou
Remove the useless parenthesis in asm/io.h as suggested by Marek. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-11-06nios2: fix map_physmem to do real cache mappingThomas Chou
Fix the map_physmem() to do real cache mapping. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-11-05nios2: Use the generic bitops headersFabio Estevam
The generic bitops headers are required when calling logarithmic functions, such as ilog2(). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-10-23nios2: fix virt_to_phys for nios2 with MMUThomas Chou
As the virtual address and physical address mapping of nios2 with MMU are different. Add a check of MMU, and fix the mapping. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Ley Foon Tan <lftan@altera.com>
2015-10-23nios2: zap nios2-generic board dirThomas Chou
As we use device tree to control u-boot now, the generic board can be removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: convert dma_alloc_coherent to use malloc_cache_alignedThomas Chou
Convert dma_alloc_coherent to use memalign. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: convert copy_exception_trampoline to use dm cpu dataThomas Chou
Convert copy_exception_trampoline() to use dm cpu data. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: convert cache flush to use dm cpu dataThomas Chou
Convert cache flush to use dm cpu data. The original cache flush functions are written in assembly and use CONFIG_SYS_{I,D}CACHE_SIZE... macros. It is difficult to convert to use cache configuration in dm cpu data which is extracted from device tree. The cacheflush.c of Linux nios2 arch uses cpuinfo structure, which is very close to our dm cpu data. So we copy and modify it to arch/nios2/lib/cache.c to replace the old cache.S. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: set default cache configuration in start.SThomas Chou
Set default icache and dcache configuration for start.S. We want to remove the CONFIG_SYS_{I,D}CACHE_SIZE... configuration macros. As we are just barely starting from reset, there is no luxury of device tree. We will set some maximum cache configuration so that it will work for most configurations. This is used only in this start.S. The speed penalty is only once here. After start up, during board initialization, cpu information will be extracted from device tree. Then cache flush operations will have correct cache configurations. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: clean up comments style in start.SThomas Chou
Clean up comments style in start.S. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: convert ioremap to use dm cpu dataThomas Chou
Convert ioremap() to use io_region_base in dm cpu global data. Also remove three unused io functions, which have style issue and are replaced by macros already. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: convert do_reset to use dm cpu dataThomas Chou
Convert do_reset to use dm cpu data. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: remove asm/psr.hThomas Chou
Remove asm/psr.h, which is not used. Also clean up asm/sections.h and unaligned.h. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: convert altera sysid to driver modelThomas Chou
Convert altera sysid to driver model with misc uclass. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: convert altera timer to driver modelThomas Chou
Convert altera timer to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com>
2015-10-23nios2: convert nios2 cpu to driver modelThomas Chou
Convert nios2 cpu to driver model. The cpu parameters are extracted from device tree and saved to global data structure. We will use them to replace the custom_fpga.h . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2 : convert altera_pio to driver modelThomas Chou
Convert altera_pio to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: add clear and set bits macrosThomas Chou
These macros can be used to clear and set multiple bits in a register using a single call. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
2015-10-23nios2: convert altera_jtag_uart to driver modelThomas Chou
Convert altera_jtag_uart to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: map physical address to uncached virtual addressThomas Chou
Add ioremap() to map physical address to uncached virtual address. We need this to convert the reg address from the device tree. The order of headers inclusion in interrupts.c is changed because common.h will include board header that contains IO_REGION_BASE. In the future, the IO_REGION_BASE should be decided from the device tree. tree Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: call board_init_f_memThomas Chou
We will need CONFIG_SYS_MALLOC_F_LEN to use serial uclass. So we shall undefine CONFIG_SYS_GENERIC_GLOBAL_DATA, and call board_init_f_mem() to allocates early malloc() memory with size of CONFIG_SYS_MALLOC_F_LEN in board_f.c. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: zap version_stringThomas Chou
There is a weak version_string[] at common/cmd_version.c . Remove the one in start.S. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: zap dly_clksThomas Chou
The dly_clks() in start.S is no use after switching to generic timer. Remove it. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: Split timer code into timer.cThomas Chou
Move the timer code from interrupts.c into timer.c . Eliminate the installation of timer interrupt handler, which is no longer used. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: Switch to generic timerThomas Chou
Zap almost all of the ad-hoc timer code from interrupts.c and use the code in lib/time.c instead. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: enable device tree control of U-BootThomas Chou
This patch adds device tree control of U-Boot to nios2 boards. The example dts is taken from Linux kernel. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: define _end in link scriptThomas Chou
Since commit 44c6e6591cb451ae606f8bde71dd5fb7b4002544 "rename _end to __bss_end__" , the _end was removed. But we need it now for separated device tree control, ie, CONFIG_OF_SEPARATE . The _end is used by fdtdec_setup() to find the blob. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-10-23nios2: remove gp assignments in link scriptThomas Chou
Since we don't use gp for small data with option "-G0", we use gp as global data pointer. The _gp location is not needed. The ALIGN(16) was for gp only. It is removed, so that we can get correct address of dtb in u-boot-dtb.bin image. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2015-10-23nios2: enlarge the code relocation rangeThomas Chou
As we will use u-boot-dtb.bin, the code relocation range should be adjusted to accommodate the additional dtb. It might be overkilled to look into dtb header to find the dtb size, so we will simply use CONFIG_SYS_MONITOR_LEN. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-10-23nios2: BSS should be cleared only after board_init_fThomas Chou
As dtb in u-boot-dtb.bin overlapped the BSS section, we should delay the clearing of BSS until dtb is relocated in board_init_f(). Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
2015-05-12arch: Make board selection choices optionalJoe Hershberger
By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
2015-04-10fdt: nios: Fix warning in ft_cpu_setup()Simon Glass
This function should not return a value. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Thomas Chou <thomas@wytron.com.tw>
2015-03-28generic-board: select SYS_GENERIC_BOARD for some architecturesMasahiro Yamada
We have done with the generic board conversion for all the boards of ARC, Blackfin, M68000, MicroBlaze, MIPS, NIOS2, Sandbox, X86. Let's select SYS_GENERIC_BOARD for those architectures, so we can tell which architecture has finished the conversion at a glance. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-28generic-board: move __HAVE_ARCH_GENERIC_BOARD to KconfigMasahiro Yamada
Move the option to Kconfig renaming it to CONFIG_HAVE_GENERIC_BOARD. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
2014-12-08Kbuild: introduce Makefile in arch/$ARCH/Daniel Schwierzeck
Introduce a Makefile under arch/$ARCH/ and include it in the top Makefile (similar to Linux kernel). This allows further refactoringi like moving architecture-specific code out of global makefiles, deprecating config variables (CPU, CPUDIR, SOC) or deprecating arch/$ARCH/config.mk. In contrary to Linux kernel, U-Boot defines the ARCH variable by Kconfig, thus the arch Makefile can only included conditionally after the top config.mk. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-21fdt: Allow ft_board_setup() to report failureSimon Glass
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2014-09-13kconfig: remove redundant "string" type in arch and board KconfigsMasahiro Yamada
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-30nios2: link to CONFIG_SYS_MONITOR_BASE and remove text_base hookThomas Chou
This patch changes the link script to base at CONFIG_SYS_MONITOR_BASE. Then we can remove the text_base hook in nios2-generic board. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2014-08-30nios2: move nios2.h to arch asm directoryThomas Chou
The nios2.h is nios2 cpu specific, and should go arch asm directory. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2014-08-30nios2: divide nios2-io.h into each specific drivers and remove itThomas Chou
The nios2-io.h defines hardware registers and bits of several FPGA IP cores. It could be divided in to the specific drivers, including altera timer, altera sysid, altera uart and altera jtag uart. The altera pio and altera spi drivers use their own hardware definitions. The removal of nios2-io.h will help modularity and maintenance. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2014-08-24nios2: remove EPCS driverThomas Chou
The Altera EPCS is SPI flash. We have been using SPI flash driver to access EPCS for years. The old EPCS driver could be removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2014-08-24nios2: add generic board supportThomas Chou
This patch implements the generic board init as described in doc/README.generic-board. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com> Reviewed-by: Stefan Roese <sr@denx.de>
2014-08-24nios2: remove obsolete PCI5441 and PK1C20 boardsThomas Chou
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
generated by cgit (git 2.34.1) at 2024-12-30 19:13:08 +0000