summaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc8xx
AgeCommit message (Collapse)Author
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-28watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOGChristophe Leroy
Commit f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") switched the watchdog to CONFIG_WATCHDOG. But this is not compatible with the 8xx because it starts the watchdog HW timer at reset and must be serviced from the very beginning including while U-boot is executed in the firmware before relocation in RAM. Select CONFIG_HW_WATCHDOG and make hw_watchdog_reset() visible. Meanwhile, finalise the cleanup of arch/powerpc/cpu/mpc8xx/Kconfig by removing the lines put in comment in that commit, and also remove again the selection of CONFIG_MPC8xx_WATCHDOG which was removed by that commit and brought back by mistake by commit b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Note that there was an 'imply WATCHDOG' in the original commit but it disappeared in the Kconfig alphabetical sorting, so no need to remove it here. Fixes: f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") Fixes: b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Roese <sr@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-07mpc8xx: Expose show_regs()Tom Rini
To match the other PowerPC platforms the function show_regs() must not be marked static but instead be an exposed global function. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
2020-01-17common: Move get_tbclk() to time.hSimon Glass
This function related to timer and most of the timer functions are in time.h, so move this function there. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move clock functions into a new fileSimon Glass
These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move relocate_code() to init.hSimon Glass
This is an init function so move it out of the common header. Avoid using the typedef so that we don't have to include the global_data header file. Also tidy up the function style in comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move interrupt functions into a new headerSimon Glass
These functions do not use driver model but are fairly widely used in U-Boot. But it is not clear that they will use driver model anytime soon, so we don't want to label them as 'legacy'. Move them to a new irq_func.h header file. Avoid the name 'irq.h' since it is widely used in U-Boot already. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop checkicache() and checkdcache()Simon Glass
These are used by only one arch and only within a single file. Drop the declarations from the common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move checkcpu() out of common.hSimon Glass
This function belongs in cpu_func.h so move it over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Move strtomhz() to vsprintf.hSimon Glass
At present this function sits in its own file but it does not really justify it. There are similar string functions in vsprintf.h, so move it there. Also add the missing function comment. Use the vsprintf.h include file explicitly where needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-26watchdog: mpc8xx_wdt: Watchdog driver and macros cleanupStefan Roese
With the generic watchdog driver now implemented, this patch removes some legacy stuff from the MPC8xx watchdog driver and its Kconfig integration. CONFIG_MPC8xx_WATCHDOG is completely removed and hw_watchdog_reset() is made static, as the watchdog will now get serviced via the DM infrastructure if enabled via CONFIG_WATCHDOG. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Christophe Leroy <christophe.leroy@c-s.fr>
2018-12-03powerpc, mpc8xx: clear top of stackChristophe Leroy
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-06powerpc: mpc8xx: move watchdog into drivers/watchdogChristophe Leroy
In preparation of DM watchdog, move basic actions into drivers/watchdog Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: cleaning up watchdogChristophe Leroy
In preparation of migration to DM watchdog, clean up a bit. The 8xx watchdog really is a HW watchdog, so declare it as is then it goes through Kconfig And the watchdog reset doesn't mind getting interrupted, so no need to disable interrupts Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: refactorise reginfoChristophe Leroy
reginfo is redundant with some of the commands in immap.c, so move reginfo into that file and remove duplicated info. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: initialisation of initial RAMChristophe Leroy
u-boot requires some RAM at startup, to store global data structure. RAM is also needed when we migrate to DM for some initial malloc This patch implements the proper init of that RAM by calling board_init_f_alloc_reserve() and board_init_f_init_reserve() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powercp: mpc8xx: move commproc.hChristophe Leroy
include/commproc.h is dedicated to the 8xx, rename it cpm_8xx.h and move it into arch/powerpc/include/asm Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xxChristophe Leroy
CONFIG_8xx doesn't mean much outside of arch/powerpc/ This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ... It also renames 8xx_immap.h to immap_8xx.h to be consistent with other file names. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: remove get_immr() argumentChristophe Leroy
get_immr() is always called with 0 as an argument, so it is useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: get rid of the multiple PVR_ valuesChristophe Leroy
Avoid hardcoding the PVR values in C since they are defined in processor.h At the same time, remove those multiple PVR values for 8xx and keep only one that we call PVR_8xx Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-04-06powerpc: mpc8xx: harmonise initialisation of the immap local pointerChristophe Leroy
In most places, immap local pointer is defined as immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR; In a few places, it is defined as immap_t __iomem *immap = (immap_t __iomem *)(immr & 0xFFFF0000); This patch replaces the few of the latest form by the other one. The two are fully equivalent since SPRN_IMMR is set with CONFIG_SYS_IMMR very early in start.S Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2018-03-05libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>Masahiro Yamada
Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-26powerpc: Rework interrupt_init_cpu()Tom Rini
The function interrupt_init_cpu() is given an int return type but does not return anything but 0. Rework this to be a void function. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Mario Six <mario.six@gdsys.cc>
2017-07-23powerpc, 8xx: fix missing function declarations.Christophe Leroy
Add missing .h and add missing declarations in .h Declare local functions as static. Make interrupt_init_cpu function signatures consistent with how decrementer_count is declared. Based on warnings reported by 'make C=2' Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [trini: drop cpu_init_f as 8xx/83xx are different from the rest, rework interrupt_init_cpu/decrementer_count] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-22powerpc: move get_pvr() and get_svr() into CChristophe Leroy
Avoid unnecessary assembly functions when they can easily be written in C. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc, 8xx: move cache helper into CChristophe Leroy
Avoid unnecessary assembly functions when they can easily be written in C. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc, 8xx: move get_immr() into CChristophe Leroy
Avoid unnecessary assembly functions when they can easily be written in C. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc, 8xx: Move cache function into C filesChristophe Leroy
Avoid unnecessary assembly functions when they can easily be written in C. Also remove dc_read() as it is nowhere referenced Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc, 8xx: Simplifying check_CPU()Christophe Leroy
All complex case have been removed and we now only support MPC866 and MPC885 families. So check_CPU() can be made a lot simpler. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc: Remove unneccessary #ifdefs in reginfoChristophe Leroy
reginfo command is calling mpc8xx_reginfo(), mpc85xx_reginfo() or mpc86xx_reginfo() based on CONFIG_ symbol. As those 3 functions can't me defined at the same time, let's rename them print_reginfo() to avoid the #ifdefs The name is kept generic as it is not at all dependent on powerpc arch and any other arch could want to also print such information. In addition, as the Makefile compiles cmd/reginfo.c only when CONFIG_CMD_REGINFO is set, there is no need to enclose the U_BOOT_CMD definition inside a #ifdef CONFIG_CMD_REGINFO Lets all remove the #ifdefs around the U_BOOT_CMD as this file is only compiled when CONFIG_CMD_REGINFO is defined Finally, this is a PowerPC-only command, disable it on a number of non-PowerPC platforms. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-22powerpc, timer: Does 8xx specific actions in 8xx cpu_initChristophe Leroy
The actions inside #ifdef CONFIG_8xx in arch/powerpc/lib/time.c can be performed before, in a 8xx dedicated function. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc: get rid of addr_probe()Christophe Leroy
This function has never been used, at least since the beginning of the git repository Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-22powerpc, 8xx: Simplify brgclk calculation and remove get_brgclk()Christophe Leroy
divider is calculated based on SCCR_DFBRG, with: SCCR_DFBRG 00 => divider 1 = 1 << 0 SCCR_DFBRG 01 => divider 4 = 1 << 2 SCCR_DFBRG 10 => divider 16 = 1 << 4 SCCR_DFBRG 11 => divider 64 = 1 << 6 This can be easily converted to a single shift operation: divider = 1 << (SCCR_DFBRG * 2) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: Add support for MCR3000 board from CSSIChristophe Leroy
CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000 and CMPC885 which are respectively based on MPC866 and MPC885 processors. This patch adds support for the first board. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move Serial driver to drivers/serial/Christophe Leroy
At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move SPI driver to drivers/spi/Christophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: move FEC Ethernet driver in drivers/netChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08powerpc, 8xx: Migrate to KconfigChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Properly set CPM frequency in the device treeChristophe Leroy
For processors whose core runs at twice the bus frequency, the fallback frequency calculation in Linux provides a wrong result. Therefore, U-boot needs to pass the correct value. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Handle checkpatch errors and some of the warnings/checksChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Implement GLL2 ERRATAChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: Use IO accessors to access IO memoryChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: move specific reginfoChristophe Leroy
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/Christophe Leroy
immap.c used to be common to several CPUs. It is now only linked to the 8xx, so this patch moves it into arch/powerpc/cpu/mpc8xx/ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-08powerpc: Partialy restore core of mpc8xxChristophe Leroy
CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>