summaryrefslogtreecommitdiff
path: root/arch/sandbox/include
AgeCommit message (Collapse)Author
2015-07-21dm: test: Add a test for the system controller uclassSimon Glass
Add a test to confirm that we can access system controllers and find their driver data. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21sandbox: Use the reset driver to handle resetSimon Glass
Move sandbox over to use the reset uclass for reset, instead of a direct call to do_reset(). This allows us to add tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21sandbox: Support multiple reset typesSimon Glass
Add settings for the last reset generated, and the types of resets which are permitted. This will be used for testing. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21dm: test: Add tests for the clk uclassSimon Glass
Add tests of each API call using a sandbox clock device. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06sandbox: Don't try distro_bootcmd by defaultSjoerd Simons
For the distro_bootcmds to succeed on the sandbox a bit of setup is required (e.g. network configured or host image bound), so running them by default isn't that useful. Add a -b/--boot command to the sandbox binary, which triggers the distro_bootcmds to run after the other command-line commands. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: rtc: sandbox: Add an emulated I2C RTC deviceSimon Glass
Add a sandbox I2C emulation device which emulates a real-time clock. The clock works off an offset from the current system time, and supports setting and getting the clock, as well as access to byte-width regisers in the RTC. It does not support changing the system time. This device can be used for testing the 'date' command on sandbox, as well as the RTC uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: i2c: Add an explicit test mode to the sandbox I2C driverSimon Glass
At present this driver has a few test features. They are needed for running the driver model unit tests but are confusing and unnecessary if using sandbox at the command line. Add a flag to enable the test mode, and don't enable it by default. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05sandbox: eth: Add a function to skip ping timeoutsJoe Hershberger
When called, the next call to receive will trigger a 10-second leap forward in time to avoid waiting for time to pass when tests are evaluating timeout behavior. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05sandbox: Add test function to advance timeJoe Hershberger
Add a function that maintains an offset to include in the system timer values returned from the lib/time.c APIs. This will allow timeouts to be skipped instantly in tests Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-23fdt: sandbox: Move setup code from board_f to fdtdecSimon Glass
We want to be able to set up the device tree in SPL, so move this code to a common place. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-22exynos: sandbox: ti: Add SPDX license identifiers and notesSimon Glass
For some files I neglected to add a license. Rectify this: arch/arm/dts/exynos4210-pinctrl-uboot.dtsi arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi arch/arm/dts/exynos5250-pinctrl-uboot.dtsi arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi arch/arm/dts/s5pc100-pinctrl.dtsi arch/arm/dts/s5pc110-pinctrl.dtsi This file came from Linux and has no license information there, so add a comment to that effect: arch/sandbox/include/asm/bitops.h This file also came from Linux - presumably someone from TI could add the license: include/dt-bindings/pinctrl/omap.h Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Ingrid Viitanen <ingrid.viitanen@nokia.com>
2015-04-18sandbox: eth: Add support for using the 'lo' interfaceJoe Hershberger
The 'lo' interface on Linux doesn't support thinks like ARP or link-layer access like we use to talk to a normal network interface. A higher-level network API must be used to access localhost. As written, this interface is limited to not supporting ICMP since the API doesn't allow the socket to be opened for all IP traffic and be able to receive at the same time. UDP is far more useful to test with, so it was selected over ICMP. Ping won't work, but things like TFTP should work. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18sandbox: eth: Add a bridge to a real network for sandboxJoe Hershberger
Implement a bridge between U-Boot's network stack and Linux's raw packet API allowing the sandbox to send and receive packets using the host machine's network interface. This raw Ethernet API requires elevated privileges. You can either run as root, or you can add the capability needed like so: sudo /sbin/setcap "CAP_NET_RAW+ep" /path/to/u-boot Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18sandbox: eth: Add ability to disable ping reply in sandbox eth driverJoe Hershberger
This is needed to test the netretry functionality (make the command fail on a sandbox eth device). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-16dm: sandbox: pci: Add PCI support for sandboxSimon Glass
Add the required header information, device tree nodes and I/O accessor functions to support PCI on sandbox. All devices are emulated by drivers which can be added as required for testing or development. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-15sandbox: Return '-c command' exit value as sandbox exit codeJoe Hershberger
When a command is passed into sandbox using the '-c' argument the command is run directly. This is most helpful when running tests (such as test-dm.sh). Previously the exit code was an unused enum. Change it to be the actual return code from the command so that the script calling sandbox can know if the command succeeded (tests passed). Also remove the now completely unused "exit_state" in sandbox. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-02-09common: Move dram_init() declaration to common locationMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2014-12-11dm: i2c: Add an I2C EEPROM simulatorSimon Glass
To enable testing of I2C, add a simple I2C EEPROM simulator for sandbox. It supports reading and writing from a small data store. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-27Provide option to avoid defining a custom version of uintptr_t.Gabe Black
There's a definition in stdint.h (provided by gcc) which will be more correct if available. Define CONFIG_USE_STDINT to use this feature, or USE_STDINT=1 on the 'make' commmand. This adjusts the settings for x86 and sandbox, with both have 64-bit options. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Bill Richardson <wfrichar@google.com> Rewritten to be an option, since stdint.h is often available only in glibc. Changed to preserve a clear boundary between stdint and non-stdint Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: sf: sandbox: Convert SPI flash driver to driver modelSimon Glass
Convert sandbox's spi flash emulation driver to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: sandbox: spi: Move to driver modelSimon Glass
Adjust the sandbox SPI driver to support driver model and move sandbox over to driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-07-23sandbox: Set up global data before board_init_f()Simon Glass
At present sandbox defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that the global_data pointer is set up in board_init_f(). If we set up and zero the global data before calling board_init_f() then we don't need to define CONFIG_SYS_GENERIC_GLOBAL_DATA. Make this change to simplify the init process. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-07build: define CPU only when arch/${ARCH}/cpu/${CPU} existsMasahiro Yamada
The directory arch/${ARCH}/cpu/${CPU} does not exist in avr32, blackfin, microblaze, nios2, openrisc, sandbox, x86. These architectures have only one CPU type. Defining CPU should not be required for such architectures. This commit allows cpu field (= the 3rd field of boards.cfg) to be kept blank. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Thomas Chou <thomas@wytron.com.tw> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2014-06-23sandbox: change local_irq_save() to macroMasahiro Yamada
local_irq_save() should be a macro, not a function because local_irq_save() saves flag to the given argument. GCC is silent about this issue, but Clang warns: In file included from lib/asm-offsets.c:15: In file included from include/common.h:20: In file included from include/linux/bitops.h:110: arch/sandbox/include/asm/bitops.h:59:17: warning: variable 'flags' is uninitialized when used here [-Wuninitialized] local_irq_save(flags); ^~~~~ That change causes another warning: In file included from include/linux/bitops.h:110:0, from include/common.h:20, from lib/asm-offsets.c:15: arch/sandbox/include/asm/bitops.h: In function ‘test_and_set_bit’: arch/sandbox/include/asm/bitops.h:56:16: warning: unused variable ‘flags’ [-Wunused-variable] So, flags should be set to __always_unused. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-06-20sandbox: Support iotrace featureSimon Glass
Support the iotrace feature for sandbox, and enable it, using some dummy I/O access methods. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-27dm: rename device struct to udeviceHeiko Schocher
using UBI and DM together leads in compiler error, as both define a "struct device", so rename "struct device" in include/dm/device.h to "struct udevice", as we use linux code (MTD/UBI/UBIFS some USB code,...) and cannot change the linux "struct device" Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
2014-05-12common/board_f: Initialized global data for generic boardYork Sun
Some platforms (tested on mpc85xx, mpc86xx) use global data before calling function baord_inti_f(). The data should not be cleared later. Any arch which uses global data in generic board board_init_f() should define CONFIG_SYS_GENERIC_GLOBAL_DATA. Signed-off-by: York Sun <yorksun@freescale.com> CC: Scott Wood <scottwood@freescale.com> CC: Simon Glass <sjg@chromium.org> CC: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org>
2014-03-17sandbox: Add options to clean up temporary filesSimon Glass
When jumping from one sandbox U-Boot to another in sandbox, the RAM buffer is preserved in the jump by using a temporary file. Add an option to tell the receiving U-Boot to remove this file when it is no longer needed. Similarly the old U-Boot image is left behind in this case. We cannot delete it immediately since gdb cannot then find its debug symbols. Delete it just before exiting. Together these changes ensure that temporary files are removed both for memory and U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17sandbox: Allow Ctrl-C to work in sandboxSimon Glass
It is useful for Cltl-C to be handled by U-Boot as it is on other boards. But it is also useful to be able to terminate U-Boot with Ctrl-C. Add an option to enable signals while in raw mode, and make this the default. Add an option to leave the terminal cooked, which is useful for redirecting output. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17sandbox: Add LCD driverSimon Glass
Add a simple LCD driver which uses SDL to display the image. We update the image regularly, while still providing for reasonable performance. Adjust the common lcd code to support sandbox. For command-line runs we do not want the LCD to be displayed, so add a --show_lcd option to enable it. Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17sandbox: Add a simple sound driverSimon Glass
Add a sound driver for sandbox, which uses SDL. Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17sandbox: Add SDL library for LCD, keyboard, audioSimon Glass
SDL (Simple DirectMedia Layer - see www.libsdl.org) is a library which provides simple graphics and sound features. It works under X11 and also with a simple frame buffer interface. It is ideally suited to sandbox U-Boot since it fits nicely with the low-level feature set required by U-Boot. For example, U-Boot has its own font drawing routines, its own keyboard processing and just needs raw sound output. We can use SDL to provide emulation of these basic functions for sandbox. This significantly expands the testing that is possible with sandbox. Add a basic SDL library which we will use in future commits. Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17sandbox: Add -j option to indicate a jump from a previous U-BootSimon Glass
In order to support the 'go' command we allow the jumping U-Boot to pass its filename to the new U-Boot image. This can then be used to delete that image if required. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-04sandbox: Convert GPIOs to use driver modelSimon Glass
Convert sandbox over to use driver model GPIOs. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08sandbox: Add a prototype for cleanup_before_linux()Simon Glass
This function is defined but has no prototype declaration. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08sandbox: Add facility to save/restore sandbox stateSimon Glass
It is often useful to be able to save out the state from a sandbox test run, for analysis or to restore it later to continue a test. Add generic infrastructure for doing this using a device tree binary file. This is a flexible tagged file format which is already supported by U-Boot, and it supports hierarchy if needed. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
2014-01-08sandbox: Allow reading/writing of RAM bufferSimon Glass
It is useful to be able to save and restore the RAM contents of sandbox U-Boot either for setting up tests, for later analysys, or for chaining together multiple tests which need to keep the same memory contents. Add a function to provide a memory file for U-Boot. This is read on start-up and written when shutting down. If the file does not exist on start-up, it will be created when shutting down. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-01-08sandbox: Add -i option to enter interactive modeSimon Glass
Normally when U-Boot starts with a command (-c option) it quits when the command completes. Normally this is what is requires, since the test is likely complete. Provide an option to jump into the console instead, so that debugging or other tasks may be performed before quitting. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-09sandbox: spi: Add SPI emulation busMike Frysinger
This adds a SPI framework for people to hook up simulated SPI clients. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-09sandbox: Rename sb_cmdline_option to sandbox_cmdline_optionSimon Glass
The new name is longer but more clearly related to sandbox. This is in a separate patch within the same series since some comments on the SPI series rely on it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
2013-11-21sandbox: Make map_to_sysmem() use a constant pointerSimon Glass
Very often a constant pointer is passed to this function, so we should declare this, since map_to_sysmem() does not change the pointer. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-11-21sandbox: config: Don't use 64-bit physical memorySimon Glass
Sandbox uses an emulated memory map which is quite small. We don't need the CONFIG_PHYS_64BIT option since we can address memory with a 32-bit offset into our ram_buf. Adjust the phys_addr_t and phys_size_t types accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
2013-10-14Coding Style cleanup: remove trailing white spaceWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host fileSimon Glass
With sandbox it is tricky to add an FDT to the image at build time (or later) since we build an ELF file, not a plain binary, and the address space of the whole U-Boot is not accessible in the emulated memory map of sandbox. Sandbox can read files directly from the host, though, so add an option to read an FDT from a host file on start-up. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-01sandbox: Switch over to generic boardSimon Glass
Add generic board support for sandbox. and remove the old board init code. Select CONFIG_SYS_GENERIC_BOARD for sandbox now that this is supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2013-05-01sandbox: Provide a way to map from host RAM to U-Boot RAMSimon Glass
In many cases, pointers to memory are passed around, and these pointers refer to U-Boot memory, not host memory. This in itself is not a problem. However, in a few places, we cast that pointer back to a ulong (being a U-Boot memory address). It is possible to convert many of these cases to avoid this. However there are data structures (e.g. struct bootm_headers) which use pointers. We could with a lot of effort adjust the structs and all code that uses them to use ulong instead of pointers. This seems like an unacceptable cost, since our objective with sandbox is to minimise the impact on U-Boot code while maximising the features available to sandbox. Therefore, create a map_to_sysmem() function which converts from a pointer to a U-Boot address. This can be used sparingly when needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15Introduce generic link section.h symbol filesSimon Glass
We create a separate header file for link symbols defined by the link scripts. It is helpful to have these all in one place and try to make them common across architectures. Since Linux already has a similar file, we bring this in even though many of the symbols there are not relevant to us. Each architecture has its own asm/sections.h where symbols specifc to that architecture can be added. For now everything except AVR32 just includes the generic header. One change is needed in arch/avr32/lib/board.c to make this conversion work. Reviewed-by: Tom Rini <trini@ti.com> (version 5) Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-28sandbox: Add un/map_sysmen() to deal with sandbox's ram_bufSimon Glass
Sandbox doesn't actually provide U-Boot access to the machine's physical memory. Instead it provides a RAM buffer of configurable size, and all memory accesses are within that buffer. Sandbox memory starts at 0 and is CONFIG_DRAM_SIZE bytes in size. Allowing access outside this buffer might produce unpredictable results in the event of an error, and would expose the host machine's memory architecture to the sandbox U-Boot. Most U-Boot functions assume that they can just access memory at given address. For sandbox this is not true. Add a map_sysmem() call which converts a U-Boot address to a system address. In most cases this is a NOP, but for sandbox it returns a pointer to that memory inside the RAM buffer. To get a U-Boot feature to work correctly within sandbox, you should call map_sysmem() to get a pointer to the address, and then use that address for any U-Boot memory accesses. Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-04sandbox: Use generic global_dataSimon Glass
Move sandbox over to use generic global_data. Signed-off-by: Simon Glass <sjg@chromium.org>