summaryrefslogtreecommitdiff
path: root/arch/x86/cpu
AgeCommit message (Collapse)Author
2012-11-28x86: Put global data on the stackGraeme Russ
Putting global data on the stack simplifies the init process (and makes it slightly quicker). During the 'flash' stage of the init sequence, global data is in the CAR stack. After SDRAM is initialised, global data is copied from CAR to the SDRAM stack Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Forward declare gd_tGraeme Russ
So it can be used as a type in struct global_data and remove an ugly typecast Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2012-10-22common: Discard the __u_boot_cmd sectionMarek Vasut
The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22common: Add .u_boot_list into all linker filesMarek Vasut
Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-03-06sc520: fix build warning about unused temp varMike Frysinger
Building the eNET_SRAM board fails for me: sc520_timer.c: In function 'sc520_udelay': sc520_timer.c:81:7: error: variable 'temp' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors make[1]: *** [sc520_timer.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-04x86: Tweak IDT and GDT for alignment and readabilityGraeme Russ
-- Changes for v2: - Renamed to better reflect nature of changes
2012-01-04x86: Create weak init_cache() and default enable_caches() functionsGraeme Russ
-- Changes for v2: - Tweaked commit title
2012-01-04x86: Use fs for global dataGraeme Russ
Use the base address of the 'F' segment as a pointer to the global data structure. By adding the linear address (i.e. the 'D' segment address) as the first word of the global data structure, the address of the global data relative to the 'D' segment can be found simply, for example, by: fs movl 0, %eax This makes the gd 'pointer' writable prior to relocation (by reloading the Global Desctriptor Table) which brings x86 into line with all other arches NOTE: Writing to the gd 'pointer' is expensive (but we only do it twice) but using it to access global data members (read and write) is still fairly cheap -- Changes for v2: - Rebased against changes made to patch #3 - Removed extra indent - Tweaked commit message
2012-01-04x86: Simplify Flash-to-RAM code execution transitionGraeme Russ
Move the relocation offset calculation out of assembler and into C. This also paves the way for the upcoming init sequence simplification by adding the board_init_f_r flash to RAM transitional function -- Changes for v2: - Added commit message - Minor adjustment to new stack address comment
2012-01-04x86: Rework Global Descriptor Table loadingGraeme Russ
The inline assembler is ugly and uses hard coded magic numbers. Make it more elegant to allow cleaner implementation of future GDT related patches. The compiler seems smart enough to generate the same code anyway -- Changes for v2: - Rebased against revised patch #3 - Use GDT size define instead of magic number - Added commit message
2012-01-04x86: Remove GDR related magic numbersGraeme Russ
-- Changes for v2: - Use an enum - Add defined for GDT size (previously added in patch 7) - Use X86_ namespace (as per Linux headers)
2011-12-19x86: Add infrastructure to extract an e820 table from the coreboot tablesGabe Black
Also approximate the size of RAM using the largest RAM address available in the tables. There may be areas which are marked as reserved which are actually at the end of RAM. Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19x86: Import code from coreboot's libpayload to parse the coreboot tableGabe Black
This change also forces the lib_sysinfo structure to be in the .data section. Otherwise it ends up in the .bss section. U-boot assumes that it doesn't need to copy it over during relocation, and instead fills that whole section with zeroes. If we really were booting from ROM that would be appropriate, but we need some information from the coreboot tables (memory size) before then and have to fill that structure before relocation. We skirt u-boot's assumption by putting this in .data where it assumes there is still read only but non-zero data. Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-12-19x86: Initial commit for running as a coreboot payloadGabe Black
Add a target for running u-boot as a coreboot payload in boards.cfg, a board, CPU and a config. This is a skeleton implementation which always reports the size of memory as 64 MB. Signed-off-by: Gabe Black <gabeblack@chromium.org>
2011-11-29x86: Fix a few recently added bugsGabe Black
Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29x86: Misc cleanupsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29x86: Misc PCI touchupsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29x86: Ensure IDT and GDT remain 16-byte aligned post relocationGraeme Russ
Some CPUs have strict alignment requirements for these tables Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29x86: Add multiboot headerGraeme Russ
By adding a multiboot header, U-Boot can be loaded by GRUB2. Using GRUB2 to bootstrap U-Boot is useful for using an existing BIOS to get an initial U-Boot port up and running before implementing the low-level reset vector code, SDRAM init, etc. and overwriting the BIOS Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29sc520: Create arch asm-offsetsGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29x86: Punt cold- and warm-boot flagsGraeme Russ
Nobody uses them anyway Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-29cosmetic: checkpatch cleanup of arch/x86/cpu/sc520/*.cGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29cosmetic: checkpatch cleanup of arch/x86/cpu/*.cGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-29x86: Call hang() on unrecoverable exceptionGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-11-02x86: Rename include/asm/ic to include/asm/arch-sc520Graeme Russ
Also include some trivial related cleanups
2011-11-02x86: turn off cache: set control register properlyOndrej Kupka
Bits should be ORed when they are supposed to be added together Signed-off-by: Ondrej Kupka <ondra.cap@gmail.com>
2011-08-04Convert ISO-8859 files to UTF-8Albert ARIBAUD
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source tree, which could cause issues with the patchwork review system. This commit converts all ISO-8859 files to UTF-8. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-07-28cleanup: Fix typos and misspellings in various files.Mike Williams
Recieve/Receive recieve/receive Interupt/Interrupt interupt/interrupt Addres/Address addres/address Signed-off-by: Mike Williams <mike@mikebwilliams.com>
2011-05-19Minor coding style cleanup.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-04-13sc520: Move reset to stand-alone fileGraeme Russ
Partial linking allows weak functions to be overridden in files containing only one function. Moving the sc520 override of reset_cpu gets rid of an ugly #ifdef Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-13x86: Rename i386 to x86Graeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-27 11:29:48 +0000