summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2015-02-05x86: Adjust the FSP types slightlySimon Glass
To avoid casts, find_fsp_header() should return a pointer. Add asmlinkage to two API functions which use that convention. UPD_TERMINATOR is common so move it into a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05x86: Move common FSP code into a common locationSimon Glass
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05x86: video: Allow video ROM execution to fall back to the other methodSimon Glass
If the BIOS emulator is not available, allow use of native execution if available, and vice versa. This can be controlled by the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-02-05x86: Rename MMCONF_BASE_ADDRESS and make it common across x86Simon Glass
This setting will be used by more than just ivybridge so make it common. Also rename it to PCIE_ECAM_BASE which is a more descriptive name. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-24x86: ivybridge: Drop the Kconfig MRC cache informationSimon Glass
This is now stored in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-24x86: config: Enable hook for saving MRC configurationSimon Glass
Add a hook to ensure that this information is saved. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-24x86: Implement a cache for Memory Reference Code parametersSimon Glass
The memory reference code takes a very long time to 'train' its SDRAM interface, around half a second. To avoid this delay on every boot we can store the parameters from the last training sessions to speed up the next. Add an implementation of this, storing the training data in CMOS RAM and SPI flash. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-24x86: dts: Add SPI flash MRC details for chromebook_linkSimon Glass
Correct the SPI flash compatible string, add an alias and specify the position of the MRC cache, used to store SDRAM training settings for the Memory Reference Code. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-24x86: Use ipchecksum from net/Simon Glass
The existing IP checksum function is only accessible to the 'coreboot' cpu. Drop it in favour of the new code in the network subsystem. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-23x86: Fix various code format issues in start16.SBin Meng
Various minor code format issues are fixed in start16.S: - U-boot -> U-Boot - 32bit -> 32-bit - Use TAB instead of SPACE to indent - Move the indention location of the GDT comment block Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23x86: Test mtrr support flag before accessing mtrr msrBin Meng
On some x86 processors (like Intel Quark) the MTRR registers are not supported. This is reflected by the CPUID (EAX 01H) result EDX[12]. Accessing the MTRR registers on such processors will cause #GP so we must test the support flag before accessing MTRR MSRs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23x86: Save mtrr support flag in global dataBin Meng
CPUID (EAX 01H) returns MTRR support flag in EDX bit 12. Probe this flag in x86_cpu_init_f() and save it in global data. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23x86: Add missing DECLARE_GLOBAL_DATA_PTR for mtrr.cBin Meng
arch/x86/cpu/mtrr.c has access to the U-Boot global data thus DECLARE_GLOBAL_DATA_PTR is needed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23x86: Fix out of bounds irq handlers accessSebastien Ronsse
Using coreboot-x86_defconfig, the following error occurred prior to this modification: CC arch/x86/lib/interrupts arch/x86/lib/interrupts.c: In function ‘do_irqinfo’: arch/x86/lib/interrupts.c:134:24: error: iteration 16u invokes undefined behavior [-Werror=aggressive-loop-optimizations] if (irq_handlers[irq].handler != NULL) { ^ arch/x86/lib/interrupts.c:133:2: note: containing loop for (irq = 0; irq <= CONFIG_SYS_NUM_IRQS; irq++) { ^ cc1: all warnings being treated as errors scripts/Makefile.build:275: recipe for target 'arch/x86/lib/interrupts.o' failed make[1]: *** [arch/x86/lib/interrupts.o] Error 1 Makefile:1093: recipe for target 'arch/x86/lib' failed make: *** [arch/x86/lib] Error 2 Change-Id: I3572a822081b72ab760f1eb99442e1161d3d167e Signed-off-by: Sebastien Ronsse <sronsse@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23x86: Support ROMs on other archsSimon Glass
We shouldn't assume that the VGA ROM can always be loaded at c0000. This is only true on x86 machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13x86: coreboot: Configure pci memory regionsBin Meng
Configure coreboot pci memory regions so that pci device drivers could work correctly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Make chromebook_link the default board for corebootBin Meng
Change SYS_CONFIG_NAME and DEFAULT_DEVICE_TREE to chromebook_link which is currently the only real board officially supported to run U-Boot loaded by coreboot. Note the symbolic link file chromebook_link.dts is deleted and link.dts is renamed to chromebook_link.dts. To avoid multiple definition of video_hw_init, the CONFIG_VIDEO_X86 define needs to be moved to arch/x86/cpu/ivybridge/Kconfig. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: coreboot: Move coreboot-specific defines from coreboot.h to KconfigBin Meng
There are many places in the U-Boot source tree which refer to CONFIG_SYS_COREBOOT, CONFIG_CBMEM_CONSOLE and CONFIG_VIDEO_COREBOOT that is currently defined in coreboot.h. Move them to arch/x86/cpu/coreboot/Kconfig so that we can switch to board configuration file to build U-Boot later. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Hide ROM chip size when CONFIG_X86_RESET_VECTOR is not selectedBin Meng
When CONFIG_X86_RESET_VECTOR is not selected, specifying the ROM chip size is meaningless, hence hide it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Move CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to KconfigBin Meng
Convert CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig options so that we can remove them from board configuration file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Allow a hardcoded TSC frequency provided by KconfigBin Meng
By default U-Boot automatically calibrates TSC running frequency via MSR and PIT. The calibration may not work on every x86 processor, so a new Kconfig option CONFIG_TSC_CALIBRATION_BYPASS is introduced to allow bypassing the calibration and assign a hardcoded TSC frequency CONFIG_TSC_FREQ_IN_MHZ. Normally the bypass should be turned on in a simulation environment like qemu. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: coreboot: Set up timer base correctlyBin Meng
If coreboot is built with CONFIG_COLLECT_TIMESTAMPS, use the value of base_time in coreboot's timestamp table as our timer base, otherwise TSC counter value will be used. Sometimes even coreboot is built with CONFIG_COLLECT_TIMESTAMPS, the value of base_time in the timestamp table is still zero, so we must exclude this case too (this is currently seen on booting coreboot in qemu). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: fsp: Drop get_hob_type() and get_hob_length()Bin Meng
These two are not worth having separate inline functions as they are really simple, so drop them. Also changed 'type' parameter of fsp_get_next_hob() from u16 to uint. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Add an 'mtrr' command to list and adjust MTRRsSimon Glass
It is useful to be able to see the MTRR setup in U-Boot. Add a command to list the state of the variable MTRR registers and allow them to be changed. Update the documentation to list some of the available commands. This does not support fixed MTRRs as yet. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13x86: ivybridge: Update microcode early in bootSimon Glass
At present the normal update (which happens much later) does not work. This seems to have something to do with the 'no eviction' mode in the CAR, or at least moving the microcode update after that causes it not to work. For now, do an update early on so that it definitely works. Also refuse to continue unless the microcode update check (later in boot) is successful. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Disable CAR before relocation on platforms that need itSimon Glass
For platforms with CAR we should disable it before relocation. Check if this function is available and call it if so. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: ivybridge: Add a way to turn off the CARSimon Glass
Cache-as-RAM should be turned off when we relocate since we want to run from RAM. Add a function to perform this task. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Commit the current MTRRs before relocationSimon Glass
Once we stop running from ROM we should set up the MTTRs to speed up execution. This is only needed for platforms that don't have an FSP. Also in the Coreboot case, the MTRRs are set up for us. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: ivybridge: Request MTRRs for DRAM regionsSimon Glass
We should use MTRRs to speed up execution. Add a list of MTRR requests which will dealt with when we relocate and run from RAM. We set RAM as cacheable (with write-back) and registers as non-cacheable. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: ivybridge: Set up an MTRR for the video frame bufferSimon Glass
Set the frame buffer to write-combining. This makes it faster, although for scrolling write-through is even faster for U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Add support for MTRRsSimon Glass
Memory Type Range Registers are used to tell the CPU whether memory is cacheable and if so the cache write mode to use. Clean up the existing header file to follow style, and remove the unneeded code. These can speed up booting so should be supported. Add these to global_data so they can be requested while booting. We will apply the changes during relocation (in a later commit). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: ivybridge: Drop support for ROM cachingSimon Glass
This is set up along with CAR (Cache-as-RAM) anyway. When we relocate we don't really need ROM caching (we read the VGA BIOS from ROM but that is about it) Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Tidy up VESA mode numbersSimon Glass
There are some bits which should be ignored when displaying the mode number. Make sure that they are not included in the mode that is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Use cache, don't clear the display in video BIOSSimon Glass
There is no need to run with the cache disabled, and there is no point in clearing the display frame buffer since U-Boot does it later. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: ivybridge: Only run the Video BIOS when video is enabledSimon Glass
This takes about about 700ms on link when running natively and 900ms when running using the emulator. It is a waste of time if video is not enabled, so don't bother running the video BIOS in that case. We could add a command to run the video BIOS later when needed, but this is not considered at present. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13x86: Drop RAMTOP KconfigSimon Glass
We don't need this in U-Boot since we calculate it based on available memory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-01-13x86: Correct XIP_ROM_SIZESimon Glass
This should default to the size of the ROM for faster execution before relocation. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: crownbay: Add pci devices in the dts fileBin Meng
The Topcliff PCH has 4 UART devices integrated (Device 10, Funciton 1/2/3/4). Add the corresponding device nodes in the crownbay.dts per Open Firmware PCI bus bindings. Also a comment block is added for the 'stdout-path' property in the chosen node, mentioning that by default the legacy superio serial port (io addr 0x3f8) is still used on Crown Bay as the console port. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-13x86: Use ePAPR defined properties for x86-uartBin Meng
Use ePAPR defined properties for x86-uart: clock-frequency and current-speed. Assign the value of clock-frequency in device tree to plat->clock of x86-uart instead of using hardcoded number. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12x86: Simplify the fsp hob access functionsBin Meng
Remove the troublesome union hob_pointers so that some annoying casts are no longer needed in those hob access routines. This also improves the readability. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12pci: Make pci apis usable before relocationBin Meng
Introduce a gd->hose to save the pci hose in the early phase so that apis in drivers/pci/pci.c can be used before relocation. Architecture codes need assign a valid gd->hose in the early phase. Some variables are declared as static so change them to be either stack variable or global data member so that they can be used before relocation, except the 'indent' used by CONFIG_PCI_SCAN_SHOW which just affects some print format. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12x86: Support pci bus scan in the early phaseBin Meng
On x86, some peripherals on pci buses need to be accessed in the early phase (eg: pci uart) with a valid pci memory/io address, thus scan the pci bus and do the corresponding resource allocation. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12x86: Add missing DECLARE_GLOBAL_DATA_PTR for pci.cBin Meng
arch/x86/cpu/pci.c has access to the U-Boot global data thus DECLARE_GLOBAL_DATA_PTR is needed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12x86: Clean up the board dts filesBin Meng
This commits cleans up the board dts files. - Correct the serial port register size to 8 - Remove the misleading status = "disabled" statement in the serial.dtsi - Move the inclusion of skeleton.dtsi from serial.dtsi to board dts files - Let the board dts file define stdout-path in the chosen node - Remove device nodes in board dts files thar are duplicated to skeleton.dtsi Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12x86: Rename coreboot.dsti to serial.dtsiBin Meng
The name of coreboot.dtsi is misleading, as it actually describes the legacy serial port device node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-12x86: Remove alex.dts in arch/x86/dtsBin Meng
No board is using alex.dts, so remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18x86: Clean up the FSP support codesBin Meng
This is the follow-on patch to clean up the FSP support codes: - Remove the _t suffix on the structures defines - Use __packed for structure defines - Use U-Boot's assert() - Use standard bool true/false - Remove read_unaligned64() - Use memcmp() in the compare_guid() - Remove the cast in the memset() call - Replace some magic numbers with macros - Use panic() when no valid FSP image header is found - Change some FSP utility routines to use an fsp_ prefix - Add comment blocks for asm_continuation and fsp_init_done - Remove some casts in find_fsp_header() - Change HOB access macros to static inline routines - Add comments to mention find_fsp_header() may be called in a stackless environment - Add comments to mention init(&params) in fsp_init() cannot be removed Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18x86: Rename coreboot-serial to x86-serialBin Meng
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18x86: crownbay: Add SDHCI supportBin Meng
There are two standard SD card slots on the Crown Bay board, which are connected to the Topcliff PCH SDIO controllers. Enable the SDHC support so that we can use them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-12-18x86: crownbay: Add SPI flash supportBin Meng
The Crown Bay board has an SST25VF016B flash connected to the Tunnel Creek processor SPI controller used as the BIOS media where U-Boot is stored. Enable this flash support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-27 22:58:02 +0000