summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2012-12-06x86: Emit port 80 post codes in show_boot_progress()Stefan Reinauer
This helps us monitor boot progress and determine where U-Boot dies if there are any problems. Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: fdt: Create basic .dtsi file for corebootSimon Glass
This contains just the minimum information for a coreboot-based board. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: coreboot: Set CONFIG_ARCH_DEVICE_TREE correctlyGabe Black
We will use coreboot.dtsi as our fdt include file. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Add support for CONFIG_OF_CONTROLGabe Black
Allow a device tree to be provided through the standard mechanisms. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Add CONFIG_DELAY_ENVIRONMENT to delay environment loadingStefan Reinauer
This option delays loading of the environment until later, so that only the default environment will be available to U-Boot. This can address the security risk of untrusted data being used during boot. When CONFIG_DELAY_ENVIRONMENT is defined, it is convenient to have a run-time way of enabling loadinlg of the environment. Add this to the fdt as /config/delay-environment. Note: This patch depends on http://patchwork.ozlabs.org/patch/194342/ Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
2012-12-06x86: Add back cold- and warm-boot flagsGabe Black
These were removed, but actually are useful. Cold means that we started from a reset/power on. Warm means that we started from another U-Boot. We determine whether u-boot on x86 was warm or cold booted (really if it started at the beginning of the text segment or at the ELF entry point). We plumb the result through to the global data structure. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Override calculate_relocation_address to use the e820 mapGabe Black
Because calculate_relocation_address now uses the e820 map, it will be able to avoid addresses over 32 bits and regions that are at high addresses but not big enough for U-Boot. It also means we can remove the hack which limitted U-Boot's idea of the size of memory to less than 4GB. Also take into account the space needed for the heap and stack, so we avoid picking a very small region those areas might overlap with something it shouldn't. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Make calculate_relocation_address an overridable functionGabe Black
Different systems may have different mechanisms for picking a suitable place to relocate U-Boot to. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Make the upper bound on relocated symbols closed instead of openGabe Black
This seems to be a bug. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Reorder x86's post relocation memory layoutGabe Black
This changes the layout in decreasing addresses from: 1. Stack 2. Sections in the image 3. Heap to 1. Sections in the image 2. Heap 3. Stack This allows the stack to grow significantly more since it isn't constrained by the other u-boot areas. More importantly, the generic memory wipe code assumes that the stack is the lowest addressed area used by the main part of u-boot. In the original layout, that means that u-boot tramples all over itself. In the new layout, it works. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Initialise SPI if enabledGabe Black
If we have SPI support, make sure that we init it. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vic Yang <victoryang@chromium.org>
2012-12-06x86: Implement arch_phys_memset so that it can wipe memory above 4GBGabe Black
Implement arch_phys_memset so that it can set memory at physical addresses above 4GB using PAE paging. Because there are only 5 page tables in PAE mode, 1 PDPT and 4 PDTs, those tables are statically allocated in the BSS. The tables must be 4K page aligned and are declared that way, and because U-Boot starts as 4K aligned and the relocation code relocates it to a 4K aligned address, the tables work as intended. While paging is turned on, all 4GB are identity mapped except for one 2MB page which is used as the window into high memory. This way, U-Boot will continue to work as expected when running code that expects to access memory freely, but the code can still get at high memory through its window. The window is put at 2MB so that it's 2MB page aligned, low in memory to be out of the way of things U-Boot is likely to care about, and above the lowest 1MB where lots of random things live. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Increase the size of the phys_size_t and phys_addr_t typesGabe Black
These types should be 64 bits long to reflect the fact that physical addresses and the size of physical areas of memory are more than 32 bits long. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Fix off-by-one error in do_elf_reloc_fixups()Duncan Laurie
The use of post-increment with a do-while loop results in the loop going one step too far when handling relocation fixups. In about 1/100 cases this would cause it to hang. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Ignore memory >4GB when parsing Coreboot tablesDuncan Laurie
U-boot is unable to actually use that memory and it can cause problems with relocation if it tries to. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Fix indirect jmp warning in zimage.cSimon Glass
This fixes the following warning: zimage.c:312: Warning: indirect jmp without `*' Also fixed these warnings to keep checkpatch quiet: warning: arch/x86/lib/zimage.c,311: unnecessary whitespace before a quoted newline warning: arch/x86/lib/zimage.c,312: unnecessary whitespace before a quoted newline warning: arch/x86/lib/zimage.c,313: unnecessary whitespace before a quoted newline Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Clean up MTRR 7 right before jumping to the kernelStefan Reinauer
This cleans up the rom caching optimization implemented in coreboot (and needed throughout U-Boot runtime). Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Import MSR/MTRR code from LinuxGraeme Russ
Imported from Linux 3.1 with a few modifications to suit U-Boot Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Provide a function to clean up just before booting a zimageStefan Reinauer
This function can be used by boards which want to do some clean-up before booting a zImage. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Add basic cache operationsStefan Reinauer
Add functions to enable/disable the data cache. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Fill in the dram info using the e820 map on coreboot/x86Gabe Black
This way when that dram "banks" are displayed, there's some useful information there. The number of "banks" we claim to have needs to be adjusted so that it covers the number of RAM e820 regions we expect to have/care about. This needs to be done after "RAM" initialization even though we always run from RAM. The bd pointer in the global data structure doesn't automatically point to anything, and it isn't set up until "RAM" is available since, I assume, it would take too much space in the very constrained pre-RAM environment. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Add a CBMEM timestamp generated right before the kernel startup.Vadim Bendebury
To maintain the initialization state of the timestamp facility, thesq pointer to the CBMEM section containing the timestamp table should be kept in the .data section (so that it is maintained across u-boot relocation). Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Enable coreboot timestamp facility support in u-boot.Vadim Bendebury
This change turns on the code which allows u-boot to add timestamps to the timestamp table created by coreboot. Since u-boot does not use the tsc_t like structure to represent HW counter readings, this structure is being replaced by 64 bit integer. The timestamp_init() function is now initializing the base timer value used by u-boot to calculate the HW counter increments. Timestamp facility is initialized as soon as the timestamp table pointer is found in the coreboot table. The u-boot generated timer events' ID will start at 1000 to clearly separate u-boot events from coreboot events in the timer trace. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: Add function to read time stamp counterVadim Bendebury
Put this function in the u-boot-x86.h header file. We could instead create timer.h perhaps. We support setting a base time, and reading the time relative to this base. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06x86: gpio: Add GPIO driver for Intel ICH6 and later.Bill Richardson
Implement <asm-generic/gpio.h> functions for Intel ICH6 and later. Only GPIOs 0-31 are handled by this code. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Don't spam POST80 codes with slow IO functionsStefan Reinauer
This patch prevents u-boot from "spamming" random progress codes on a port 80 "post card". The previous version of this patch just removed the delays in the "slow" IO functions, as they do not need to be slow, however, this patch is less intrusive. It uses another unused port that is often used by BIOSes (and the Linux Kernel) for small delay timing purposes. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Fix typo in pcat_timer.cStefan Reinauer
Fix a small comment typo. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Include types.h explicitly in the i386 version of io.hGabe Black
The i386 version of io.h depends on the phys_addr_t type which is defined in types.h. It wasn't including that explicitly, and was working presumably because the other files including it had already included types.h themselves directly or indirectly. This change fixes that. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Add a dummy implementation for timer_get_usGabe Black
The microsecond timer is not currently implemented, but add a dummy implementation for now. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Add a default implementation for cleanup_before_linux()Gabe Black
This function provides an opportunity for some last minute cleanup and reconfiguration before control is handed over to Linux. It's possible this may need to do something in the future, but for now it's left empty. It's set up as a weak symbol so it can be overridden if necessary on a case by case basis. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Add an fdt pointer to the global data structureGabe Black
This change adds a pointer to the global data structure in x86 to point to the device tree. This mirrors an identical pointer in ARM. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: Allow compiling out realmode/bios codeGabe Black
We don't want this for coreboot, so provide a way of compiling it out. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: coreboot: Decode additional coreboot sysinfo tagsSimon Glass
Add support for decoding tags for GPIOs, compile/build info, cbmem and other features. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30x86: coreboot: Drop sysinfo.cStefan Reinauer
sysinfo.c only contains the lib_sysinfo data structure which is used/filled by tables.c. This split was introduced by importing code from libpayload originally, but to keep the code simple, add the single line of actual code to tables.c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: coreboot: Implement recursively scanning PCI bussesGabe Black
A hook is installed to configure PCI bus bridges as they encountered by u-boot. The hook extracts the secondary bus number from the bridge's config space and then recursively scans that bus. On Coreboot, the PCI bus address space has identity mapping with the physical address space, so declare it as such to ensure that the "pci_map_bar" function used by some PCI drivers is behaving properly. This fixes the EHCI PCI driver initialization on Stumpy. This was tested as follows: Ran the PCI command on Alex, saw devices on bus 0, the OXPCIe 952 on bus 1, and empty busses 2 through 5. This matches the bridges reported on bus 0 and the PCI configuration output from coreboot. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: coreboot: Tell u-boot about PCI bus 0 when initializingGabe Black
U-boot needs a host controller or "hose" to interact with the PCI busses behind them. This change installs a host controller during initialization of the coreboot "board" which implements some of X86's basic PCI semantics. This relies on some existing generic code, but also duplicates a little bit of code from the sc520 implementation. Ideally we'd eliminate that duplication at some point. It looks like in order to scan buses beyond bus 0, we'll need to tell u-boot's generic PCI configuration code what to do if it encounters a bridge, specifically to scan the bus on the other side of it. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Graeme Russ <graeme.russ@gmail.com>
2012-11-28x86: coreboot: Move non-board specific files to coreboot arch directoryStefan Reinauer
coreboot.c and coreboot_pci.c don't contain board specific but only coreboot specific code. Hence move it to the coreboot directory in arch/x86/cpu (which should probably be moved out of cpu/ in another commit) Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Add some missing includesGabe Black
I suspect these includes were usually available because something else included them earlier or because they were brought in transitively. Change-Id: I6aae2ac94dc792eac6febb4345e8125f69f70988 Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Allow excluding reset vector code from u-bootGabe Black
When running from coreboot we don't want this code. This version works by ifdef-ing out all of the code that would go into those sections and all the code that refers to it. The sections are then empty, and the linker will either leave them empty for the loader to ignore or remove them entirely. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Add initial memory barrier macrosSimon Glass
These are available on other architectures, so add them on x86. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Add ilog2 to bitopsGraeme Russ
ilog2 is required by AHCI driver Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Remove duplicate PCI initGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Put global data on the stackGraeme Russ
Putting global data on the stack simplifies the init process (and makes it slightly quicker). During the 'flash' stage of the init sequence, global data is in the CAR stack. After SDRAM is initialised, global data is copied from CAR to the SDRAM stack Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28x86: Forward declare gd_tGraeme Russ
So it can be used as a type in struct global_data and remove an ugly typecast Signed-off-by: Graeme Russ <graeme.russ@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
2012-10-22common: Discard the __u_boot_cmd sectionMarek Vasut
The command declaration now uses the new LG-array method to generate list of commands. Thus the __u_boot_cmd section is now superseded and redundant and therefore can be removed. Also, remove externed symbols associated with this section from include/command.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-22common: Add .u_boot_list into all linker filesMarek Vasut
Add section for the linker-generated lists into all possible linker files, so that everyone can easily use these lists. This is mostly a mechanical adjustment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org>
2012-10-19x86: Change global data baudrate to intSimon Glass
This doesn't need to be a long, so change it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
2012-08-09global_data: unify global flag definesMike Frysinger
All the global flag defines are the same across all arches. So unify them in one place, and add a simple way for arches to extend for their needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-05-15net: move bootfile init into eth_initializeMike Frysinger
All arches init this the same way, so move the logic into the core net code to avoid duplicating it everywhere else. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit (git 2.34.1) at 2024-12-30 21:27:20 +0000