summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-07-20rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use defconfig for SYS_MALLOC_F_LENKever Yang
There is no difference in rk322x board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move ROCKCHIP_BOOT_MODE_REG to soc KconfigKever Yang
Rockchip SoCs have different ROCKCHIP_BOOT_MODE_REG value, move it to SoC's own Kconfig, and add address for rk3128 and rk3328 so that all SoCs have available address. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3399 config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3368 config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3288 config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk322x config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: fixup board choice in KconfigKever Yang
Kconfig for board target select is choice option, fixup for rk3036, rk3288 and rv1108. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: remove redundant pinctrl header includingKever Yang
No code is using this header file, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: remove pinctrl init in spl_board_initKever Yang
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3188: remove pinctrl init in spl_board_initKever Yang
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: remove pinctrl init in spl_board_initKever Yang
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsiJagan Teki
Use LPDDR4-100 sdram timings dtsi for RockPI-4 board. All these timings are processed during TPL stage of rock-pi-4 board, bootchain. This make TPL would replace rockchip in house rkbin in current bootchain. Bootchain after and before this change: TPL -> SPL -> U-Boot proper rkbin -> SPL -> U-Boot proper Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsiJagan Teki
Use DDR3-1866 2GB ddr timings dtsi for 1GB NanoPi Neo4 board. Since sdram rk3399 support dynamic stride and rank detection it can able to detect 1GB ddr eventough the timings are meant for dual channel, 2GB size. Bootchain after and before this change are: TPL -> SPL -> U-Boot proper rkbin -> SPL -> U-Boot proper This certainly fix the second channel data training initialization since we have dynamic rank, stride where second channel capabilities are clear or memset to 0. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsiJagan Teki
Use LPDDR4-100 sdram timings dtsi for Rockpro64 board. All these timings are processed during TPL stage of rockpro64 board, bootchain. This make TPL would replace rockchip in house rkbin in current bootchain. Bootchain after and before this change: TPL -> SPL -> U-Boot proper rkbin -> SPL -> U-Boot proper Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: dts: rk3399: Add LPDDR4-100 timingsJagan Teki
Add sdram timings for LPDDR4-100 via rk3399-sdram-lpddr4-100.dtsi file. all timings are dumped from rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin Associated LPDDR4 board -u-boot.dtsi can include this to make these timings available during SPL or TPL stages. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmuJagan Teki
Add u-boot,dm-pre-reloc property for pmu in rk3399-u-boot.dtsi so-that SPL can access pmu. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: rk3399: syscon: Add pmu supportJagan Teki
Add pmu compatible with relevant U_BOOT_DRIVER for rk3399 via syscon rk3399 driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21arm: include: rockchip: Add rk3399 pmu fileJagan Teki
Add pmu header file for rk3399 SoC, this will help to configure pmu in sdram driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add DdrModeJagan Teki
Add DdrMode structure with associated bit fields. These would help to reconfigure sdram capabilities during lpddr4 setup related configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add ddrtimingC0Jagan Teki
Add DdrTimingC0 structure with associated bit fields. These would help to reconfigure sdram capabilities during lpddr4 setup related configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add ddr version enc macroJagan Teki
Add dram config macro for handling ddr version number. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Introduce sys_reg3 for more capacity infoJagan Teki
cs0_row, cs1_row and cs1_col needs more bits to show its correct value, update to make use of both sys_reg2, sys_reg3. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (Squash similar patches into one patch) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Simply existing dram enc macroJagan Teki
Add simplified and meaningful macro for all setting. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> (Squash the similar patches into 1 patch) Signed-off-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: debug: Add sdram_print_strideJagan Teki
Add code to print the channel stride, this would help to print the stride of associated channel. Here is sample print on LPDDR4, 50MHz. 256B stride Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: debug: Add sdram_print_ddr_infoJagan Teki
Add sdram ddr info print support, this would help to observe the sdram base parameters. Here is sample print on LPDDR4, 50MHz channel 0 BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: Add debug sdram driverJagan Teki
Add sdram driver to handle debug across rockchip SoCs. This would help to improve code debugging feature for sdram drivers in rockchip family, whoever wants to debug the driver should call these core debug code on their respective platform sdram drivers. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19arm: include: rockchip: Add DDR4 enumJagan Teki
Add DDR4 enum number in common header. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19arm: include: rockchip: Move dramtypes to common headerJagan Teki
dramtype enum numbers as common across all dram controllers in rockchip, so move the eneum values in common header. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: Move common sdram structures in common headerJagan Teki
Move common sdram structures like sdram_cap_info, sdram_base_params into sdram_common header, this would help to reuse the same from another controllers like px30. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rk3399: s/rk3399_base_params/sdram_base_paramsJagan Teki
Most of the ddr parameters are common in rk3399_base_params structure and which would reuse it in another controller like px30 in future. So, rename the structure from rk3399_base_params into sdram_base_params. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19ram: rockchip: rk3399: Add cap_info structureJagan Teki
Group common ddr attributes like - rank - col - bk - bw - dbw - row_3_4 - cs0_row - cs1_row - ddrconfig into a common cap_info structure for more code readability and extend if possible based on the new features. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19rockchip: dts: rk3399: Add 'same-as-spl' for Rock PI 4Andy Yan
Let the board continue boot from the storage device where it bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19rockchip: dts: rk3399: Add spl-boot-order for Rock PI 4Andy Yan
RK3399 use sdhci for eMMC and DW MMC for SD Card, and spl will only try to boot from SDMMC if we don't specify other boot device for spl-boot-order. So add sdhci and sdmmc for spl-boot-order here. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6Peter Robinson
Sync the dts files for the Rock960 boards from Linux to get the latest changes and fixes for the devices. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-18Merge branch '2019-07-17-master-imports'Tom Rini
- Various FS/disk related fixes with security implications. - Proper fix for the pci_ep test. - Assorted bugfixes - Some MediaTek updates. - 'env erase' support.
2019-07-18arm: dts: MediaTek: remove tick-timer from mt7629.dtsiWeijie Gao
This patch removes tick-timer as all mt7629 boards should use arch timer. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18arm: dts: MediaTek: fix clock order for timer0 node of mt7629.dtsiWeijie Gao
The timer0 node has its two clocks written in reversed order. The timer0 is used as the tick timer which causes a problem that the time a delay function used is 4 times longer. This patch reverses these two clocks to solve this issue. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18arm: mediatek: add missing arch timer configuration for MT7629Weijie Gao
This patch sets CNTVOFF of ARM CP15 timer to zero to make sure the virtual counter is fully usable for linux kernel. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18arm: qemu: fix failure in flash initialization if booting from TF-AAKASHI Takahiro
If U-Boot is loaded and started from TF-A (you need to change SYS_TEXT_BASE to 0x60000000), it will hang up at flash initialization. If secure mode is off (default, or -machine virt,secure=off) at qemu, it will provide dtb with two flash memory banks: flash@0 { bank-width = <0x4>; reg = <0x0 0x0 0x0 0x4000000 0x0 0x4000000 0x0 0x4000000>; compatible = "cfi-flash"; }; If secure mode is on, on the other hand, qemu provides dtb with 1 bank: flash@0 { bank-width = <0x4>; reg = <0x0 0x4000000 0x0 0x4000000>; compatible = "cfi-flash"; }; As a result, flash_init()/flash_get_size() will eventually fail. With this patch applied, relevant CONFIG values are modified. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-18arm: move CONFIG_TFABOOT to generic KconfigAKASHI Takahiro
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig, but it will be also useful for other targets if some additional configuration are necessary. So move it to arch/arm/Kconfig. Please note that CONFIG_TFABOOT still depends on CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up if any target doesn't need its own customization for TF-A boot. This will maintain the compatibility. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Sriram Dash <sriram.dash@nxp.com> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Peng Ma <peng.ma@nxp.com> Cc: Yuantian Tang <andy.tang@nxp.com> Cc: Pankit Garg <pankit.garg@nxp.com>
2019-07-18ARM: correct detection of thumb modeHeinrich Schuchardt
When a crash occurs in thumb mode the crash dump is incorrect. This is due to the usage of a non-existing configuration variable CONFIG_ARM_THUMB in the definition of macro thumb_mode(regs). Use CONFIG_IS_ENABLED(SYS_THUMB_BUILD) to detect that the code has been compiled for thumb mode. Remove ARM_THUMB from config_whitelist.txt. With the patch crash dumps indicate thumb mode correctly. On a system with thumb mode: => exception unaligned data abort pc : [<8f7a2b52>] lr : [<8f7ab1ef>] reloc pc : [<1780cb52>] lr : [<178151ef>] sp : 8ed8c3f8 ip : 8f7a2b4d fp : 00000002 r10: 8f7f8228 r9 : 8ed95ea8 r8 : 8ed99488 r7 : 8f7ab141 r6 : 00000000 r5 : 8ed8c3f9 r4 : 8f7f6390 r3 : 8ed9948c r2 : 00000001 r1 : 00000000 r0 : 8f7f6390 Flags: nzCv IRQs off FIQs off Mode SVC_32 (T) Code: 8f7e 466d f105 0501 (e9d5) 6700 The Flags line has '(T)' and in the Code line the output is in u16 groups. On a system without thumb mode: => exception breakpoint prefetch abort pc : [<7ff5a5c8>] lr : [<7ff675ec>] reloc pc : [<0000e5c8>] lr : [<0001b5ec>] sp : 7ee0ad80 ip : 7ff5a5cc fp : 7ff674cc r10: 00000002 r9 : 7ef0bed8 r8 : 7ffd6214 r7 : 7ef0e080 r6 : 00000000 r5 : 7ffd4090 r4 : 00000000 r3 : 7ef0e084 r2 : 00000001 r1 : 00000000 r0 : 7ffd4090 Flags: nzCv IRQs off FIQs off Mode SVC_32 Code: e1a0500d e2855001 e1c560d0 e3a00001 (e12fff1e) The Flags line does not show '(T)' and in the Code line the output is in u32 groups. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-17board: ti: am654: Use EEPROM-based board detectionAndreas Dannenberg
The TI AM654x EVM base board and the associated daughtercards have on- board I2C-based EEPROMs containing board configuration data. Use the board detection infrastructure introduced earlier to do the following: 1) Parse the AM654x EVM base board EEPROM and populate items like board name and MAC addresses into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing the associated presence signals via an I2C-based GPIO expander. Then, if such a card is found, parse the data such as additional Ethernet MAC addresses from its on-board EEPROM and populate into U-Boot accordingly 3) Dynamically create an U-Boot ENV variable called overlay_files containing a list of daugherboard-specific DTB overlays based on daughercards found. This patch adds support for the AM654x base board ("AM6-COMPROCEVM") as well as for the IDK ("AM6-IDKAPPEVM"), OLDI LCD ("OLDI-LCD1EVM") PCIe/USB3.0 ("SER-PCIEUSBEVM"), 2 Lane PCIe/USB2.0 ("SER-PCIE2LEVM"), and general purpuse ("AM6-GPAPPEVM") daughtercards. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17arm: K3: am654: Map common EEPROM data into SRAM scratch spaceAndreas Dannenberg
The board detection scheme employed on various TI EVMs makes use of SRAM scratch space to share data read from an on-board EEPROM between the different bootloading stages. Map the associated definition that's used to locate this data into the SRAM scratch space we use on AM654x. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit (git 2.34.1) at 2025-01-07 21:49:04 +0000