summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-05-20Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: (167 commits) OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT ARM: omap3: Set SPL stack size to 8KB, image to 54KB. arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree omap4: do not enable auxiliary cores omap4: do not enable fs-usb module omap4: panda: disable uart2 pads during boot igep00x0: change mpurate from 500 to auto igep00x0: enable the use of a plain text file tegra2: trivially enable 13 mhz crystal frequency tegra: Enable keyboard for Seaboard tegra: Switch on console mux and use environment for console tegra: Add tegra keyboard driver tegra: fdt: Add keyboard definitions for Seaboard tegra: fdt: Add keyboard controller definition tegra: Add keyboard support to funcmux input: Add support for keyboard matrix decoding from an fdt input: Add generic keyboard input handler input: Add linux/input.h for key code support fdt: Add fdtdec functions to read byte array tegra: Enable LP0 on Seaboard tegra: fdt: Add EMC data for Tegra2 Seaboard tegra: i2c: Add function to find DVC bus fdt: tegra: Add EMC node to device tree tegra: Add EMC settings for Seaboard tegra: Turn off power detect in board init tegra: Set up warmboot code on Nvidia boards tegra: Setup PMC scratch info from ap20 setup tegra: Add warmboot implementation tegra: Set up PMU for Nvidia boards tegra: Add PMU to manage power supplies tegra: Add EMC support for optimal memory timings tegra: Add header file for APB_MISC register tegra: Add tegra_get_chip_type() to detect SKU tegra: Add flow, gp_padctl, fuse, sdram headers tegra: Add crypto library for warmboot code tegra: Add functions to access low-level Osc/PLL details tegra: Move ap20.h header into arch location Add AES crypto library i2c: Add TPS6586X driver Add abs() macro to return absolute value fdt: Add function to return next compatible subnode fdt: Add function to locate an array in the device tree i.MX28: Avoid redefining serial_put[cs]() i.MX28: Check if WP detection is implemented at all i.MX28: Add battery boot components to SPL i.MX28: Reorder battery status functions in SPL i.MX28: Add LRADC init to i.MX28 SPL i.MX28: Add LRADC register definitions i.MX28: Shut down the LCD controller before reset i.MX28: Add LCDIF register definitions i.MX28: Implement boot pads sampling and reporting i.MX28: Improve passing of data from SPL to U-Boot M28EVK: Add SD update command M28EVK: Implement support for new board V2.0 FEC: Abstract out register setup MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged i.MX28: Add delay after CPU bypass is cleared spi: mxs: Allow other chip selects to work spi: mxs: Introduce spi_cs_is_valid() mx53loco: Remove unneeded gpio_set_value() mx53loco: Add CONFIG_REVISION_TAG mx53loco: Turn on VUSB regulator mx53loco: Add mc34708 support and set mx53 frequency at 1GHz pmic: dialog: Avoid name conflicts imx: Add u-boot.imx as target for ARM9 i.MX SOCs i.MX2: Include asm/types.h in arch-mx25/imx-regs.h imx: usb: There is no such register i.MX25: usb: Set PORTSCx register imx: nand: Support flash based BBT i.MX25: This architecture has a GPIO4 too i.MX25: esdhc: Add mxc_get_clock infrastructure i.MX6: mx6q_sabrelite: add SATA bindings i.MX6: add enable_sata_clock() i.MX6: Add ANATOP regulator init mx28evk: add NAND support USB: ehci-mx6: Fix broken IO access M28: Scan only first 512 MB of DRAM to avoid memory wraparound Revert "i.MX28: Enable additional DRAM address bits" M28: Enable FDT support mx53loco: Add support for 1GHz operation for DA9053-based boards mx53loco: Allow to print CPU information at a later stage mx5: Add clock config interface imx-common: Factor out get_ahb_clk() i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow mx31pdk: Allow booting a zImage kernel mx6qarm2: Allow booting a zImage kernel mx6qsabrelite: Allow booting a zImage kernel mx28evk: Allow booting a zImage kernel m28evk: Allow to booting a dt kernel mx28evk: Allow to booting a dt kernel mx6qsabrelite: No need to set the direction for GPIO3_23 again pmic: Add support for the Dialog DA9053 PMIC MX53: mx53loco: Add SATA support MX53: Add support to ESG ima3 board SATA: add driver for MX5 / MX6 SOCs MX53: add function to set SATA clock to internal SATA: check for return value from sata functions MX5: Add definitions for SATA controller NET: fec_mxc.c: Add a way to disable auto negotiation Define UART4 and UART5 base addresses EXYNOS: Change bits per pixel value proper for u-boot. EXYNOS: support TRATS board display function LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI EXYNOS: support EXYNOS MIPI DSI interface driver. EXYNOS: support EXYNOS framebuffer and FIMD display drivers. LCD: add data structure for EXYNOS display driver EXYNOS: add LCD and MIPI DSI clock interface. EXYNOS: definitions of system resgister and power management registers. SMDK5250: fix compiler warning misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998 misc:pmic:max8997 MAX8997 support for PMIC driver TRATS: modify the trats's configuration ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT cm-t35: add I2C multi-bus support include/configs: Remove CONFIG_SYS_64BIT_STRTOUL include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF omap3: Introduce weak misc_init_r omap730p2: Remove empty misc_init_r omap5912osk: Remove empty misc_init_r omap4+: Remove CONFIG_ARCH_CPU_INIT omap4: Remove CONFIG_SYS_MMC_SET_DEV OMAP3: pandora: drop console kernel argument OMAP3: pandora: revise GPIO configuration ...
2012-05-20USB: S5P: Add ehci supportRajeshwari Shinde
This patch adds ehci driver support for s5p. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
2012-05-18powerpc/85xx: fix NAND boot linker scripts for -fpicScott Wood
GOT is now handled the way the main u-boot.lds does it. Without this, the boot hangs when built with newer GCC (since 4.6). Older toolchains hid the issue by converting -fpic to -fPIC. Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-05-15net: move bootfile init into eth_initializeMike Frysinger
All arches init this the same way, so move the logic into the core net code to avoid duplicating it everywhere else. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15net: punt bd->bi_ip_addrMike Frysinger
This field gets read in one place (by "bdinfo"), and we can replace that with getenv("ipaddr"). After all, the bi_ip_addr field is kept up-to-date implicitly with the value of the ipaddr env var. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xxMatt Porter
In warm reset conditions on OMAP36xx/AM/DM37xx the rom code incorrectly sets the DPLL4 clock input divider to /6.5 which is an invalid value unless the input clock is 13MHz. When a JTAG emulator is attached, a warm reset is necessary after the emulator gains control of the process. This results in a loss of serial output due to the invalid DPLL4 settings. This patch fixes the issue by resetting the DPLL4 clock input divider to /1 when the input clock is not 13MHz. AM/DM37x TRM section 3.5.3.3.3.2.1 specifies that the /6.5 setting is only used when the input clock is 13MHz. Signed-off-by: Matt Porter <mporter@ti.com>
2012-05-15omap4: do not enable auxiliary coresTero Kristo
Booting up these cores (dsp / ivahd / cortex-m3) is bad without firmware running on them, and they will hang preventing any kind of sleep transitions later on with the kernel. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: R Sricharan <r.sricharan@ti.com>
2012-05-15omap4: do not enable fs-usb moduleTero Kristo
If this is done in the bootloader, the FS-USB will later be stuck into intransition state, which will prevent the device from entering idle. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2012-05-15tegra2: trivially enable 13 mhz crystal frequencyLucas Stach
This is needed for upcoming Toradex Colibri T20 upstream support. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: fdt: Add keyboard controller definitionAnton Staff
The Tegra keyboard controller provides a simple interface to a matrix keyboard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add keyboard support to funcmuxSimon Glass
Add funcmux support for the default keyboard mapping. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: i2c: Add function to find DVC busSimon Glass
Add tegra_i2c_get_dvc_bus_num() to obtain the I2C bus number of DVC bus. This allows us to talk to the PMU. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15fdt: tegra: Add EMC node to device treeSimon Glass
Add a definition of the memory controller node according to the bindings here: http://patchwork.ozlabs.org/patch/132928/ Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Setup PMC scratch info from ap20 setupYen Lin
Save SDRAM parameters into the warmboot scratch registers Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Yen Lin <yelin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add warmboot implementationYen Lin
Add code to set up the warm boot area in the Tegra CPU ready for a resume after suspend. Signed-off-by: Yen Lin <yelin@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add PMU to manage power suppliesJimmy Zhang
Power supplies must be adjusted in line with clock frequency. This code provides a simple routine to set the voltage to allow operation at maximum frequency. - Split PMU code into separate TPS6586X driver Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add EMC support for optimal memory timingsJimmy Zhang
Add support for setting up the memory controller parameters. Boards can set up an appropriate table in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add header file for APB_MISC registerSimon Glass
Add a basic header file for this register, to be filled in as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add tegra_get_chip_type() to detect SKUSimon Glass
We want to know which type of chip we are running on - the Tegra family has several SKUs. This can be determined by reading a fuse register, so add this function to ap20. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add flow, gp_padctl, fuse, sdram headersYen Lin
These headers provide access to additional Tegra features. flow - start/stop CPUs sdram - parameters for SDRAM fuse - access to on-chip fuses / security settings gp_padctl - pad control and general purpose registers Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Yen Lin <yelin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add crypto library for warmboot codeYen Lin
Provides an interface to aes.c for the warmboot code. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Yen Lin <yelin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Add functions to access low-level Osc/PLL detailsSimon Glass
Add clock_ll_read_pll() to read PLL parameters and clock_get_osc_bypass() to find out if the Oscillator is bypassed. These are needed by warmboot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15tegra: Move ap20.h header into arch locationSimon Glass
We want to include this from board code, so move the header into an easily-accessible location. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15Add abs() macro to return absolute valueSimon Glass
This macro is generally useful to make it available in common. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Tom Rini <trini@ti.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-05-15i.MX28: Avoid redefining serial_put[cs]()Marek Vasut
Do not define serial_putc() and serial_puts() calls if CONFIG_SPL_SERIAL_SUPPORT is set. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15i.MX28: Add battery boot components to SPLMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Reorder battery status functions in SPLMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Add LRADC init to i.MX28 SPLMarek Vasut
This code is part of battery boot support for i.MX28. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Add LRADC register definitionsMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Shut down the LCD controller before resetMarek Vasut
If the LCD controller is on before the CPU goes into reset, the traffic on LCDIF data pins interferes with the BootROM's boot mode sampling. So shut the controller down. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Add LCDIF register definitionsMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Implement boot pads sampling and reportingMarek Vasut
This patch implements code that samples i.MX28 boot pads and reports boot mode accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15i.MX28: Improve passing of data from SPL to U-BootMarek Vasut
Pass memory size from SPL via structure located in SRAM instead of SCRATCH registers. This allows passing more data about boot from SPL to U-Boot, like the boot mode pads configuration. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
2012-05-15MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchangedStefano Babic
After an update to the MX51 reference manual (Rev. 5), the values of the PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH are now clearly wrong: "Bit 13: High / Low Output Voltage Range. This bit selects the output voltage mode for SD2_CMD. 0 High output voltage mode 1 Low output voltage mode" The values are currently negated in code - fixed. Reported-by: David Jander <david.jander@protonic.nl> Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: David Jander <david.jander@protonic.nl> Acked-by: David Jander <david.jander@protonic.nl> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2012-05-15i.MX28: Add delay after CPU bypass is clearedMarek Vasut
This solves issues when larger amount of DRAM is used, like 256MB. Behave the same in case of CPU bypass as we do in case of EMI bypass, but wait 15 ms. We need to wait until the clock domain stabilizes. This issue seemed to have been caused by not waiting after frobbing with the CPU bypass, it was unrelated to memory, but had a direct impact, causing trouble. This was yet another X-File of the imx-bootlets, sigh. The conclusion is, trying a semi-random delay (there is delay after the EMI bypass change), the issue is fixed. Another possible explanation is that we do not do the "simple memory test" FSL does in their imx-bootlets (1000 R/W cycles to/from piece of the memory, while also outputing something on the serial port). This might have caused the similar delay in the imx-bootlets and therefore they didn't need to add this explicitly. For now, this seems good fix enough, but to me, whole that memory init code in imx-bootlets is completely flunked and it'd need deeper investigation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2012-05-15mx53loco: Add CONFIG_REVISION_TAGFabio Estevam
FSL 2.6.35 kernel assumes that the bootloader passes the CONFIG_REVISION_TAG information. The kernel uses this data to distinguish between Dialog versus mc34708 based boards, and also to distinguish between revA and revB of the mc34708 based boards. Suggested-by: Yu Li <yk@magniel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15imx: Add u-boot.imx as target for ARM9 i.MX SOCsTimo Ketola
Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15i.MX2: Include asm/types.h in arch-mx25/imx-regs.hTimo Ketola
types.h must be included in imx-regs.h if one wants to include imx-regs.h in a board configuration file. That for one's part is necessary, if one wants to use addresses defined in imx-regs.h. For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and a proper thing is to define it with IMX_MMC_SDHCx_BASE in board configuration file. This patch fixes the build in that case. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15i.MX25: esdhc: Add mxc_get_clock infrastructureTimo Ketola
Defining CONFIG_FSL_ESDHC brings in a call to get_clocks, so let's implement get_clocks function. This is how it seems to be implemented elsewhere. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15i.MX6: add enable_sata_clock()Eric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-05-15i.MX6: Add ANATOP regulator initDirk Behme
Init the core regulator voltage to 1.2V. This is required for the correct functioning of the GPU and when the ARM LDO is set to 1.225V. This is a workaround to fix some memory clock jitter. Note: This should be but can't be done in the DCD. The bootloader prevents access to the ANATOP registers. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Jason Chen <b02280@freescale.com> CC: Jason Liu <r64343@freescale.com> CC: Ranjani Vaidyanathan <ra5478@freescale.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <festevam@gmail.com>
2012-05-15Revert "i.MX28: Enable additional DRAM address bits"Marek Vasut
This reverts commit 69d26d09de1cb93e0a09ca71d9f0d41a66f0756a. Apparently, this commit got mainline only because of out-of-tree port and causes breakage on board that is mainline. Revert. Reason: * The OOT board has 512MB of DRAM, enabling this additional address line enabled it to work fine with 512MB of RAM. * Every mainline port has max. 256MB of DRAM, therefore this revert has no impact on any mainline port * Though this caused a problem with new M28 board with 256MB of DRAM where the chips are wired differently. The patch-to-be-reverted caused the DRAM to behave like this: [128MB chunk #1][128MB chunk #1 again][128MB chunk #2][128MB chunk #2 again] Therefore to retain the current one-memory-init-rules-them-all situation, revert this patch until another board emerges and will actually be pushed mainline that needs different setup. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
2012-05-15mx53loco: Allow to print CPU information at a later stageFabio Estevam
Print CPU information within board_late_init(). This is in preparation for adding 1GHz support, which requires programming a PMIC via I2C. As I2C is only available after relocation, print the CPU information later at board_late_init(), so that the CPU frequency can be printed correctly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15mx5: Add clock config interfaceFabio Estevam
mx5: Add clock config interface Add clock config interface support, so that we can configure CPU or DDR clock in the later init Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-05-15imx-common: Factor out get_ahb_clk()Fabio Estevam
get_ahb_clk() is a common function between mx5 and mx6. Place it into imx-common directory. Cc: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-05-15MX53: add function to set SATA clock to internalStefano Babic
The MX53 SATA interface can use an internal clock (USB PHY1) instead of an external clock. This is an undocumented feature, but used on most Freescale's evaluation boards, such as MX53-loco. As stated by Freescale's support: Fuses (but not pins) may be used to configure SATA clocks. Particularly the i.MX53 Fuse_Map contains the next information about configuring SATA clocks : SATA_ALT_REF_CLK[1:0] (offset 0x180C) '00' - 100MHz (External) '01' - 50MHz (External) '10' - 120MHz, internal (USB PHY) '11' - Reserved Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
2012-05-15MX5: Add definitions for SATA controllerStefano Babic
Add base address and MXC_SATA_CLK to return the clock used for the SATA controller. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Dirk Behme <dirk.behme@de.bosch.com>
2012-05-15Define UART4 and UART5 base addressesStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-05-15EXYNOS: support EXYNOS MIPI DSI interface driver.Donghwa Lee
EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI based LCD Panel could be used with it. This patch supports MIPI-DSI driver based Samsung SoC chip. LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at board file and LCD panel driver specific function registered to mipi_dsim_ddi structure at lcd panel init function called system init. In the MIPI-DSI driver, find lcd panel driver by using registered lcd panel name, and then initialize lcd panel driver. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2012-05-15EXYNOS: support EXYNOS framebuffer and FIMD display drivers.Donghwa Lee
This patch support EXYNOS FB and FIMD display drivers. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
generated by cgit (git 2.34.1) at 2024-12-27 04:08:14 +0000