summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2017-10-09armv8: layerscape: Enable falcon bootYork Sun
Add jump_to_image_linux() for arm64. Add "noreturn" flag to armv8_switch_to_el2(). Add hooks to fsl-layerscape to enable falcon boot. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Łukasz Majewski <lukma@denx.de> Tested-by: Łukasz Majewski <lukma@denx.de>
2017-10-09armv8: fsl-layerscape: Avoid running dram_init_banksize againYork Sun
gd->ram_size is reduced in this function to reserve secure memory. Avoid running this function again to further reduce memory size. This fixes issue for SPL boot with PPA image loaded in which case secure memory is incorrectly allocated due to repeated calling. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09spl: fix assignment of board info to global dataYork Sun
Commit 15eb1d43bf47 ("spl: reorder the assignment of board info to global data") intended to move assignment of board info earlier, into board_init_r(). However, function preload_console_init() is called either from spl_board_init() or from board_init_f(). For the latter case, the board info assignment is much earlier than proposed board_init_r(). Create a new function to fill gd->bd and call this function when needed. Signed-off-by: York Sun <york.sun@nxp.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Ravi Babu <ravibabu@ti.com> CC: Lukasz Majewski <lukma@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09armv8: fsl-layerscape: Allocate Secure memory from first ddr regionSumit Garg
This change is required due to trusted OS (OP-TEE) not being position independent code, it requires compile time fixed base address. To take care of this it is assumed that all layerscape armv8 platforms has minimum 2G ddr in first region. So we can have fixed address space (66 MB -> (2MB for PPA + 64MB for trusted OS)) allocated from top of first 2G ddr region and compile trusted OS with this fixed base address. But one exception here is ls1012 where we have only 1G (rdb) or 512M (frdm) ddr memory. For those we can have different fixed compile time base addresses for trusted OS. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: Apply workaround for USB erratum A-009007 to LS1088ARan Wang
Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-02sandbox: Use asm-generic/io.hPaul Burton
Convert the sandbox architecture to make use of the new asm-generic/io.h to provide address mapping functions. As sandbox actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic mapping functions, but are able to implement phys_to_virt() & make use of it from map_physmem(). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2017-10-02powerpc: Use asm-generic/io.hPaul Burton
Convert the powerpc architecture to make use of the new asm-generic/io.h to provide address mapping functions. As powerpc can actually perform non-identity mapping between physical & virtual addresses we can't simply make use of the generic phys_to_virt() & virt_to_phys() functions. However since map_physmem() already effectively implemented the same thing as virt_to_phys() we can simply implement virt_to_phys() instead of map_physmem() & use the generic map_physmem(). We also drop the no-op unmap_physmem(). This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Wolfgang Denk <wd@denx.de>
2017-10-02nios2: Use asm-generic/io.hPaul Burton
Convert the nios2 architecture to make use of the new asm-generic/io.h to provide address mapping functions. As nios2 actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic functions, with the exception of being able to drop our no-op unmap_physmem() and definitions of unused map flags. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Thomas Chou <thomas@wytron.com.tw>
2017-10-02mips: Use asm-generic/io.hPaul Burton
Convert the mips architecture to make use of the new asm-generic/io.h to provide address mapping functions. As mips actually performs non-identity mapping between physical & virtual addresses we can't simply make use of the generic functions, with the exception of being able to drop our no-op unmap_physmem() and definitions of unused map flags. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2017-10-02xtensa: Use asm-generic/io.hPaul Burton
Convert the xtensa architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for xtensa this is primarily a matter of moving code. This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2017-10-02x86: Use asm-generic/io.hPaul Burton
Convert the x86 architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for x86 this is primarily a matter of moving code. This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-02sh: Use asm-generic/io.hPaul Burton
Convert the sh architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for sh this is primarily a matter of moving code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-02nds32: Use asm-generic/io.hPaul Burton
Convert the nds32 architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for nds32 this is primarily a matter of removing code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Macpaul Lin <macpaul@andestech.com>
2017-10-02microblaze: Use asm-generic/io.hPaul Burton
Convert the microblaze architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for microblaze this is primarily a matter of removing code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Michal Simek <monstr@monstr.eu>
2017-10-02m68k: Use asm-generic/io.hPaul Burton
Convert the m68k architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for m68k this is primarily a matter of emoving code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Huan Wang <alison.wang@freescale.com> Cc: Angelo Dureghello <angelo@sysam.it> Acked-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Angelo Dureghello <angelo@sysam.it>
2017-10-02arm: Use asm-generic/io.hPaul Burton
Convert the arm architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for arm this is primarily a matter of removing code. This has only been build-tested, feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-02arc: Use asm-generic/io.hPaul Burton
Convert the arc architecture to make use of the new asm-generic/io.h to provide address mapping functions. As the generic implementations are suitable for arc this is primarily a matter of removing code. Feedback from architecture maintainers is welcome. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-10-01rockchip: enable TPL_SYSRESET for all rockchip SoCsKever Yang
With Makefiles testing for $(SPL_TPL_)SYSRESET, we need TPL_SYSRESET for do_reset() in TPL for Rockchip SoCs. References: 87c16d4 "drivers: spl: consistently use the $(SPL_TPL_) macro" Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rk3288: spl: Add dram_init_banksizeJagan Teki
Falcon mode, is updating DDR dt node configuration through spl_fixup_fdt() so add appropriate DDR base and size through dram_init_banksize. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLEPhilipp Tomsich
The (Qseven) BIOS_DISABLE signal on the RK3399-Q7 (Puma) keeps the eMMC and SPI in reset initially and we need to write a GPIO to turn them on before continuing the boot-up. This adds the DTS entries for the additional regulator and makes pinctrl and gpio3 available during SPL. It also adds a hook to the spl_board_init() to ensure that the regulator gets probed and enabled. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-orderPhilipp Tomsich
In the general case, we want to continue booting the full U-Boot (contained in a discoverable FIT image) from the same device the SPL stage was loaded from. This prepends the 'same-as-spl' specifier to our configurable boot-order to make this the default behaviour. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: spl: rk3399: implement chip-specific board_spl_was_booted_from()Philipp Tomsich
To support the new "same-as-spl" specifier in the boot-order on the RK3399, this implements the chip-specific mapping from the information obtainable from the BROM to a OF path name. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-orderPhilipp Tomsich
It is often desirable to configure the spl-boot-order (i.e. the order that SPL probes devices to find the FIT image containing a full U-Boot) such that it contains 'the same device the SPL stage was booted from' early on. To support this, we introduce the 'same-as-spl' specifier for the spl-boot-order property. This commit adds: - documentation for the new board_spl_was_booted_from() function that individual SoCs/boards should provide, if they can determine where the SPL was booted from - implements the new board_spl_was_booted_from() stub function - adds support for handling the 'same-as-spl' specifier and calling into the per-SoC/per-board support code. This also updates the documentation for the 'u-boot,spl-boot-order' property. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: spl: add documentation for spl_node_to_boot_device()Philipp Tomsich
In the expectation that the spl-boot-order code will eventually gain use outside of mach-rockchip: let's add documentation on the spl_node_to_boot_device() function, which is likely to become a publicly exported function. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: bootrom: add definitions to retrieve BROM boot-sourcePhilipp Tomsich
The Rockchip BROM allows reading where it booted from from SRAM. This adds the necessary definitions (as received from Kever) for the location of this information in the RK3399's SRAM and naming for the constants used. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: rk3399: make spl_board_init board-specificPhilipp Tomsich
The later-stage spl_board_init (as opposed to board_init_f) should set up board-specific details: these differ between the EVB-RK3399 and the RK3399-Q7 (Puma). This moves spl_board_init back into the individual boards and removes the unneeded functionality from Puma. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk322x: update the sysreg number for boot modeKever Yang
The boot mode for rk322x is stored in sysreg 0, update it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: rk3328-evb: add i2c1 and rk805 nodesElaine Zhang
add i2c1 and rk805 nodes to support rk805 init setting. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rk3288: vyasa: Add TPL supportJagan Teki
Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add new SPL features like Falcon mode or etc. So add TPL stage so-that adding new features to SPL is possible. - TPL: DRAM init, clocks - SPL: MMC, falcon, etc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01armv7: rk3288: Move configure_l2ctlr to commonJagan Teki
configure_l2ctlr will be shared between SPL and TPL so move them into asm/arch/sys_proto.h Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01armv7: Move L2CTLR read/write to commonJagan Teki
L2CTLR read/write functions are common to armv7 so, move them in to include/asm/armv7.h and use them where ever it need. Cc: Tom Warren <twarren@nvidia.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Backed out the change to arch/arm/mach-tegra/cache.c:] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3036: fix grf macro defineKever Yang
Some of macros definition are not correct, fix them according to TRM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3399: spl: convert to using BOOT_DEVICE_BOOTROMPhilipp Tomsich
Instead of directly calling into the back-to-bootrom code, the RK3399 common SPL implementation now uses BOOT_DEVICE_BOOTROM to trigger a transfer back into the bootrom. With this factored out, the spl_board_init function can not be customised for each RK3399 board. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-01rockchip: dts: rk3229: remove dram channel infoKever Yang
The dram channel info will be auto detect by the driver, we do not need it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2017-10-01rockchip: rk322x: add sdram driverKever Yang
Add driver for rk322x to support sdram initialize in SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3328: move sdram driver to driver/ramKever Yang
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3288: move sdram driver to driver/ramKever Yang
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3188: move sdram driver to driver/ramKever Yang
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3399: move sdram driver to driver/ramKever Yang
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: imply ADC and SARADC_ROCKCHIP for Rockchip SOCsPhilipp Tomsich
Enable the Rockchip SARADC driver for all Rockchip SoCs. Note that the SARADC peripheral is available on all SoCs except the RK3036 and RK3228. However, as this is a DM-driver, enabling by default will not cause any function problems (and can always be changed from defconfig, if size is a concern). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: David Wu <david.wu@rock-chips.com>
2017-10-01rockchip: dts: Enable SARADC for rk3399-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: Enable SARADC for rk3368-sheepDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: Enable SARADC for rk3368-px5-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: Enable SARADC for rk3328-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: Enable SARADC for rk3288-popmetalDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: Enable SARADC for rv1108-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: dts: rv1108: Add SARADC node at dtsi levelDavid Wu
Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rk3368 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: clk: Add rv1108 SARADC clock supportDavid Wu
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 10-bits width. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-29arm: dts: omap3: sync DTS with Linux 4.14-rc1Karthik Tummala
This re-syncs omap3 DTS file with current file from Linux v4.14-rc1 to ensure a consistent configuration. Upstream Linux removed the redundant Interrupt-parent property from usbhsohci, usbhsehci, ssi_port1 and ssi_port2 sub nodes. Signed-off-by: Karthik Tummala <karthik@techveda.org>
generated by cgit (git 2.34.1) at 2025-02-19 11:05:08 +0000