summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-11-05arm: dts: imx8qm-mek: add u-boot, dm-spl for lpuart0Peng Fan
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL is enabled. Since uclass power domain is also enabled, to make lpuart work properly, need add u-boot,dm-spl for lpuart power domain and its parent. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05arm: dts: imx8qxp-mek: add u-boot, dm-spl for lpuart0Peng Fan
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL is enabled. Since uclass power domain is also enabled, to make lpuart work properly, need add u-boot,dm-spl for lpuart power domain and its parent. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05imx8qm: mek: enable dm-spl for pmPeng Fan
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled, the bind and probe code in board file could be removed. Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-04Merge tag 'u-boot-imx-20191104' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191104 ------------------- - i.MX NAND: nandbcb support for MX6UL / i.MX7 - i.MX8: support for HAB - Convert to DM (opos6ul, mccmon6) - Toradex i.MX6ull colibri - sync DTS with kernel Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04Merge branch '2019-11-04-ti-imports'Tom Rini
- Various CPSW related improvements, DTS resync
2019-11-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Add support for Intel FSP-S and FSP-T in binman - Correct priority selection for image loaders for SPL - Add a size check for TPL - Various small SPL/TPL bug fixes and changes - SPI: Add support for memory-mapped flash
2019-11-03imx: nandbcb: add support for writing BCB onlyIgor Opaniuk
Add subcommand for add writing BCB only, where we provide appropriate offsets for firmware1 and firmware2 and size. Example of usage: > nandbcb bcbonly 0x00180000 0x00080000 0x00200000 Writing 1024 bytes to 0x0: randomizing OK Writing 1024 bytes to 0x20000: randomizing OK Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: nandbcb: refactor update functionIgor Opaniuk
Move code for writing FCB/DBBT pages to a separate function Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: nandbcb: add support for i.MX7Igor Opaniuk
Add support for updating FCB/DBBT on i.MX7: - additional new fields in FCB structure - Leverage hardware BCH/randomizer for writing FCB Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: gpmi: add defines for hw randominizerIgor Opaniuk
Extend GPMI Integrated ECC Control Register Description, include additional defines for enabling randomizer function and providing proper randomizer type. For additional details check i.MX7 APR, section 9.6.6.3 GPMI Integrated ECC Control Register Description (GPMI_ECCCTRLn) Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-03imx: support i.MX8QM ROM 7720 a1 boardOliver Graute
Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03arm: dts: imx8mm: sync dts from Linux KernelPeng Fan
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03board/BuR/brppt2: initial commitHannes Schmelzer
This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03imx8: output SECO-FW and ATF commit IDsAnatolij Gustschin
Borrow ID reading code from Ye Li (NXP U-Boot, commit ID 5b443e3e2617) but drop imx-mkimage commit ID reading since we now use in tree mkimage. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03mach-imx: Adding new argument for SIP call interfaceYe Li
Need to pass total 5 arguments for SIP HAB call on i.MX8MQ, so update the interface to add new argument. Signed-off-by: Ye Li <ye.li@nxp.com> [agust: fixed imx8m-power-domain build] Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8: Add AHAB secure boot supportPeng Fan
Add function and new command "auth_cntr" for secure boot support. When booting with life cycle set to OEM closed, we need to use this function to authenticate the OS container and load kernel & FDT from OS container to their destination. Also add image authentication call when loading container images. Users can set CONFIG_AHAB_BOOT=y to enable the feature. It is not set at default. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8mm: evk: enable bd71837 pmicPeng Fan
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for DRAM and linux suspend voltage requirement. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx: spl: implement spl_boot_mode for i.MX7/8/8MPeng Fan
It will be easy to separate SD/EMMC when booting in SPL stage, then no need to bother which device is BOOT_DEVICE_MMC1/2. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx: imx8mq: add init_nand_clkPeng Fan
Add init_nand_clk to enable gpmi nand clock. Since i.MX8MQ not use CCF, so we still use legacy mode to configure the clock. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8m: clock: improve irq response latencyPeng Fan
Improve the IRQ response latency by setting GIC root clock source to sys_pll2_200m from osc. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03imx8m: imx8mq: get chip rev for B1 revisionPeng Fan
The i.MX8MQ B1 uses OCOTP_HW_OCOTP_READ_FUSE_DATA register for chip id. It returns a magic number 0xff0055aa. update get_cpu_rev to support it, and enable ocotp clock to access ocotp. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03opos6uldev: migrate to DM_VIDEOSébastien Szymanski
Migrate to DM_VIDEO, update the device tree and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03imx6ul: opos6ul: migrate to DM_ETHSébastien Szymanski
Migrate to DM_ETH and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03imx: update i.MX8MQ device treesPatrick Wildt
This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot properLukasz Majewski
This commit converts mccmon6's u-boot proper (in a single commit to avoid build breaks) to use solely DM/DTS. The DTS description of the mccmon6 has been ported from Linux kernel (v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 boardLukasz Majewski
The TPC70 is equipped with DS1307 RTC device. Add code to enable support for it. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modesIgor Opaniuk
Add u-boot,dm-pre-reloc properties for uart pinmux configuration nodes, which enables UART as early as possible (before relocation). Without this we miss almost the half of output (U-boot version, CPU defails, Reset cause, DRAM details etc.). Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm") Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03ARM: dts: imx6ull-colibri: change hierarchy of DTS filesIgor Opaniuk
Introduce imx6ull-colibri-u-boot.dtsi for u-boot specific properties to keep original imx6ull-colibri.dts in sync with Linux. Move all contents of imx6ull-colibri.dts to imx6ull-colibri.dtsi + additionally fix checkpatch warnings. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03arm: mxs: Increase VDDD voltage to match specificationMarek Vasut
According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating Conditions, page 16, the VDDD should be set to 1.55V when the CPU is operating at 454MHz. This is the case in U-Boot, hence increase the VDDD voltage. This fixes instability when performing TFTP transfers. Increase the brownout threshold to 1.4V. The documentation recommends 1.45V setting for the brownout, however, this triggers failure during power block init, so keep the brownout slightly lower. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-11-03ARM: imx: Use IMX6_SRC_GPR10_BMODE instead of magic numberClaudius Heine
Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03ARM: imx: Fix bmode detection from grp10Claudius Heine
imx6_is_bmode_from_gpr9 always returns false, because IMX6_SRC_GPR10_BMODE is 1<<28 and gets casted to u8 on return. This moves the function body into imx6_src_get_boot_mode, since that is the only one using it and it is on the same abstraction level (accessing registers directly). Signed-off-by: Claudius Heine <ch@denx.de>
2019-11-03arm: dts: Add devicetree support for iMXQXP AI_ML boardManivannan Sadhasivam
Add devicetree support for iMXQXP AI_ML board from Einfochips. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-11-03i.MX6: nand: extend nandbcb command for imx6UL(L)Parthiban Nallathambi
Firmware Configuration Block(FCB) for imx6ul(l) needs to be BCH encoded. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Acked-by: Shyam Saini <shyam.saini@amarulasolutions.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_idGrygorii Strashko
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated phy_id property with phy-handle. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Cc: Heiko Schocher <hs@denx.de> Cc: Felix Brack <fb@ltec.ch> Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-11-03arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_idGrygorii Strashko
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated phy_id property with phy-handle. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-03arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_idGrygorii Strashko
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated phy_id property with phy-handle. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-03mx6: clock: Introduce disable_ipu_clock()Fabio Estevam
Introduce disable_ipu_clock(). This is done in preparation for configuring the NoC registers on i.MX6QP in SPL. Afer the NoC registers are set the IPU clocks can be disabled. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03mx6: clock: Use setbits_le32()Fabio Estevam
The code can be made simpler by using setbits_le32(), so switch to it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-11-03x86: Quieten TPL's jump_to_image_no_args()Simon Glass
We already a message indicating that U-Boot is about to jump to SPL, so make this one a debug() to reduce code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03x86: Don't print CPU info in TPLSimon Glass
We don't need to do this and it is done (in more detail) in U-Boot proper. Drop this to save code space. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03x86: Move CPU init to before spl_init()Simon Glass
At present we call spl_init() before identifying the CPU. This is not a good idea - e.g. if bootstage is enabled then it will try to set up the timer which works better if the CPU is identified. Put explicit code at each entry pointer to identify the CPU. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03x86: Add a CPU init function for TPLSimon Glass
For TPL we only need to set up the features and identify the CPU to a basic level. Add a function to handle that. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03x86: tpl: Add a fake PCI busSimon Glass
In TPL we try to minimise code size so do not include the PCI subsystem. We can use fixed BARs and drivers can directly program the devices that they need. However we do need to bind the devices on the PCI bus and without PCI this does not ordinarily happen. As a work-around, define a fake PCI bus which does this binding, but no other PCI operations. This is a convenient way to ensure that we can use the same device tree for TPL, SPL and U-Boot proper: TPL - CONFIG_TPL_PCI is not set (no auto-config, fake PCI bus) SPL - CONFIG_SPL_PCI is set (no auto-config but with real PCI bus) U-Boot - CONFIG_PCI is set (full auto-config after relocation) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03x86: spl: Support init of a PUNITSimon Glass
The x86 power unit handles power management. Support initing this device which is modelled as a new type of system controller since there are no operations needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03x86: timer: Use a separate flag for whether timer is initedSimon Glass
At present the value of the timer base is used to determine whether the timer has been set up or not. It is true that the timer is essentially never exactly 0 when it is read. However 'time 0' may indicate the time that the machine was reset so it is useful to be able to denote that. Update the code to use a separate flag instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-01Merge tag 'arc-fixes-for-2020.01-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-arc ARC fixes for v2020.01-rc2 The main change is move to DM_MMC of yet 2 another ARC boards: AXS101 & IoTDK. Among that we improve handling of stock-formatted SD-cards of high volume on EM SDP as well as introduction of reset driver for HSDK which is required for prepser reinitialization of some peripherals like USB etc.
2019-11-01arc: emsdp/iotdk: Switch to DM_MMCAlexey Brodkin
Somehow EMSDP & IoT DK boards were skipped on ARC boads conversion to DM MMC. So doing it now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-11-01Merge tag 'dm-pull-29oct19' of git://git.denx.de/u-boot-dmTom Rini
- Fix for patman with email addresses containing commas - Bootstage improvements for TPL, SPL - Various sandbox and dm improvements and fixes
2019-10-31lib: time: Add microsecond timerMarek Vasut
Add get_timer_us(), which is useful e.g. when we need higher precision timestamps. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> [trini: Fixup arch/arm/mach-bcm283x/include/mach/timer.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30Merge tag 'u-boot-clk-23Oct2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-clk - Add I2C clocks for i.MX6Q CCF driver - Fix check in clk_set_default_parents() - Managed API to get clock from device tree - Fixes for core clock code (including sandbox regression tests)
generated by cgit (git 2.34.1) at 2024-12-28 17:27:07 +0000